Page 1 of 1
Wanted: type 3 (1987 - 1989) bumper covers (bellows)
Posted: Thu Feb 06, 2020 7:21 pm
by 635sharknose
Hi,
Looking for type 3 (1987 - 1989) bumper covers (bellows).
I need these:
Back/ right: 51121967542 > NOT NEEDED ANYMORE
Front/ right: 51111967624 > NOT NEEDED ANYMORE
Front/ left: 51111967623 > NOT NEEDED ANYMORE
Anyone?
Re: Wanted: type 3 (1987 - 1989) bumper covers (bellows)
Posted: Sat Feb 08, 2020 9:53 am
by plip1953
I have both fronts, and all the plastic sections are sound, although the left side in particular would need a bit more than a light rub down before paint. Also, the internal metal sections are heavily corroded to the point where it might take a bit or ingenuity and improvisation to make them do their intended job.
Also, interestingly, they have, respectively left and right, the numbers 51.11-1971 806.9 and 51.11-1971 805.9 moulded into the plastic. But neither of these numbers seem to be recognised by OEM. Is it possible that they are for a different model altogether? When I bought them I'm certain they were described as for an E24.
I've been close on a few occasions to throwing them out, so they would be foc to anyone than could make use of them.
I'll sort some pics and add to this post shortly.
Re: Wanted: type 3 (1987 - 1989) bumper covers (bellows)
Posted: Thu Feb 13, 2020 6:21 pm
by 635sharknose
Phil,
Thank you very much for these parts!!
You are a very kind and helpful person.
MEANWHILE I FOUND THEM ALL, NO NEED FOR THESE PARTS ANYMORE