Bumper End Covers (1987 M6) or World Covers (1988 M6)
Moderators: GRNSHRK, ron, bfons
Bumper End Covers (1987 M6) or World Covers (1988 M6)
Want to buy bumper end covers for 1987 M6 or complete world bumper covers with hardware to replace 87 units.
- 86_6series
- Platinum Member
- Posts: 1073
- Joined: Mon Apr 02, 2007 10:08 pm
- Location: West Nyack, NY
Re: Bumper End Covers (1987 M6) or World Covers (1988 M6)
The World Covers will not fit to the front edge of the US style bumpers
and will not work to bolt up the air dam on the corners.
You would need to do a complete swap. The US covers and dam bolt to the inside side of
the lower fender. The World covers and dam bolt to the bottom of the fenders.
and will not work to bolt up the air dam on the corners.
You would need to do a complete swap. The US covers and dam bolt to the inside side of
the lower fender. The World covers and dam bolt to the bottom of the fenders.
86-635CSi
96-MB C220 SOLD
98-740i
71-Continental MK3
96-MB C220 SOLD
98-740i
71-Continental MK3
Re: Bumper End Covers (1987 M6) or World Covers (1988 M6)
The world bumper caps do fit over the rear if you, Tuck the bumper, Drill a hole. And trim them down slightly.
SHRKATK - Red 87' 635csi
- 635sharknose
- Posts: 513
- Joined: Fri Sep 13, 2019 4:58 pm
- Location: The Netherlands
- Contact:
Re: Bumper End Covers (1987 M6) or World Covers (1988 M6)
The front won't fit by far though, this is how the combination of a US top cover and world bumper side cover look like.
- Attachments
-
- 20200524_185719.jpg (220.68 KiB) Viewed 2031 times
Paul
Instagram: @635sharknose
1987 635CSi Bronzitbeige
Instagram: @635sharknose
1987 635CSi Bronzitbeige