WTB Drivers door lock cylinder

[euroshark]

I just realized the door lock cylinder I bought over a year ago to repiar my DRIVERS door lock is actually for the passengers side...

I need a good drivers door lock assy with key. I will recode the lock for my key. IF you have the outer barrel for the DRIVERS door lock, that is essentially the part I need. Mine has three broken tabs on the outer cylinder barrel.

My car is an '84 Euro 635 LHD. I believe anything from 5/82-1989 will work.

Thanks, Geo

[anchored]

Post a pic of the part you have and I will see if I have the right one.

Also the dealer sells a rebuild kit for pretty cheap.

[euroshark]

Here is what I have. The drivers lock has a longer outer barrel than the passengers. It also has 3 tabs on the end as opposed to the passengers.

[anchored]

I just went through this last year.

I will look at the part number on the bag and post it this evening. It seems like the price went way up which would suck.

[euroshark]

I bought a rebuild set part# 51219556329 based on RealOEM.com. This set is identical to the PASSENGERS lock cylinder. I'm windering if it is an updated version and in fact may work. Not sure.

[anchored]

Do you have central locking? that one is missing the part that hits the micro switch.

[euroshark]

Yep. Central locking and heated lock.

The drivers lock is longer, has a 3 piece outer barrel and 11 code slots as opposed to the passenger side which is shorter, has a 1 piece outer barrel and only 8 coe slots.

I've researched what I believe to be drivers side options. They are either NLA or piricey.

[EdwasRed]

Hello. I ordered 1 from Schmiedmann's a couple of years ago.

Part number: 51-21-1-886-521 Catch with key left.

Hope this helps.

[euroshark]

Thanks. I did an extensive search both here and in Europe. It's NLA.

[anchored]

upon some checking I bought the same kit.
https://www.ecstuning.com/b-genuine-bmw ... 219556329/

It went way up in price. I think I paid 32 dollars dealer cost last year. this is insane.

It fit fine and worked with my key. it was missing the part that hits the micro switch. I knew this going into it but the micro switch one was 250 when I bought.

I ended up 3d modeling and printing a replacement part.
https://www.thingiverse.com/thing:4307895

[euroshark]

I have a drivers lock assy on the way from a board member. i will rekey and hopefully be bak in action. Thanks for all your input.