engine harness
Moderators: GRNSHRK, ron, bfons
-
- Platinum Member
- Posts: 3312
- Joined: Thu Sep 28, 2006 9:28 pm
- Location: scottsdale, arizona
- Contact:
engine harness
Looking for a Motronic 1.3 engine harness out of a later car for a possible conversion. What do you have??
81 Euro 635 M90 with motronic. Currently under a complete nut and bolt restoration. Pictures at
flickr.com/photos/bertsphotos.
flickr.com/photos/bertsphotos.
-
- Posts: 212
- Joined: Wed Nov 20, 2013 4:17 pm
- Location: Massachusetts, U.S.
Re: engine harness
probably not much help. But I do have the ECU connector out of an 89 if its of any use to you. The rest of the harness was trashed unfortunately.
-
- Platinum Member
- Posts: 3312
- Joined: Thu Sep 28, 2006 9:28 pm
- Location: scottsdale, arizona
- Contact:
Re: engine harness
Thank you but I need a full uncut harness I could also use a full harness for an 80-81 635 first year Motronic 1.0 that runs off an 002 ECU
81 Euro 635 M90 with motronic. Currently under a complete nut and bolt restoration. Pictures at
flickr.com/photos/bertsphotos.
flickr.com/photos/bertsphotos.