Flywheel wanted

Post in this forum for cars and/or parts wanted.

Moderators: GRNSHRK, ron, bfons

Post Reply
sideshowbob
Posts: 247
Joined: Mon Aug 01, 2011 2:18 pm
Location: Hampshire UK

Flywheel wanted

Post by sideshowbob »

Has anyone on here got a flywheel (manual) single mass that will fit an M30 motor.

I am led to believe that the flywheel from a manual E34 535i, E34 530i, E28 535i, E28 533i, E32 735i and finally E32 730i, will all fit or can be made to fit.

I am converting my 635 CSi from an auto to a manual Getrag dog leg gearbox and this is the only bit I am missing.

Thanks in anticipation.
User avatar
Ralph in Socal
Platinum Member
Platinum Member
Posts: 2743
Joined: Tue Apr 14, 2009 3:32 am
Location: High Desert of SoCal

Re: Flywheel wanted

Post by Ralph in Socal »

The one important criteria is what engine management are you using. L-Jet and Motronic 1.3 do not require the flywheel sensors while early Motronic requires a reference pin on the flywheel.

Ralph
There is a very fine line between "Hobby" and Mental Illness.

85 635csi Zinno Auto
84 528i Euro
83 635 Euro Arktik
81 528i Kastanien 5-speed
88 528e Bronzit (Granpa Car)
86 535i Auto (For Sale)
81 633 csi (retired)
sideshowbob
Posts: 247
Joined: Mon Aug 01, 2011 2:18 pm
Location: Hampshire UK

Re: Flywheel wanted

Post by sideshowbob »

Motronic 1.3....so no troublesome bell housing sensors
sideshowbob
Posts: 247
Joined: Mon Aug 01, 2011 2:18 pm
Location: Hampshire UK

Re: Flywheel wanted

Post by sideshowbob »

Thanks everyone....unbelievably managed to source a brand new one still in BMW box specifically for a manual 635 CSi

We can now start the auto to manual conversion......
Post Reply