1985 M635csi Chassis RA1-007 Tribute Build in Texas

Post in this forum for cars and/or parts for sale.

Moderators: GRNSHRK, ron, bfons

Post Reply
VintageRacer
Posts: 87
Joined: Sat Jun 24, 2017 2:49 pm
Location: Waco, TX

1985 M635csi Chassis RA1-007 Tribute Build in Texas

Post by VintageRacer »

Well I mentioned earlier this year that this car would be going up for sale so I figure its about time to do just that. I'll be racing it at Road America at the Weathertech International Challenge July 19-22 if anyone can make it out. The car is an absolute blast to drive and race. It is super reliable resulting in more smiles per gallon. The only reason I'm selling is because I need to focus on my GT2 car and running/maintaining our Group A TWR XJS. Here is a rundown of the car specs and what has all been done to it.

1985 BMW M635csi Group A Chassis RA1-007 Tribute Build

Rust free Euro Market Car imported ~1993 from Germany to New Jersey
Built to track/racing specs in 1994 (two previous owners)
Well maintained with records documenting replacement of nearly every component
Full NASA Logbook with SCCA and SVRA endorsements
Fresh Alpineweiss paint (two stage)
Livery decals from Creative Vinyl in the U.K. (replacements are available)
3 Race Weekends since engine overhaul

4.0L S38 Engine – Estimated 425shp:
BMW S38B35 Block
Pauter E4340 Connecting Rods
94mm JE Forged Pistons (12:1)
95mm Billet Crankshaft
Shrick 272 intake and exhaust cams
Ported and Polished head
Updated E36 M3 Timing Chain Tensioner
Head Ported and Polished
3.6L Air horns for improved airflow
Electromotive EFI with crack trigger ignition
Billet Fuel Rail with AN fittings
Jethot coated custom headers

Driveline:
Metric Mechanic Ultimate Getrag 265
3.45 210mm Big Case Limited Slip Differential
Suspension:
Custom valved Bilstein front struts in custom coilover housings
Front camber plates
AFCO small body rear coilover shocks and springs
Ireland Engineering poly bushings throughout
Rear subframe modified for toe and camber adjustment

Brakes:
Wilwood Integra HP 4 piston front calipers w/Polymatrix A Compound Pads
13.1 x 1.38 two-piece front rotors
Wilwood Dyno-pro 4 piston rear calipers w/Poloymatrix H Compound Pads
12.19 x 0.81 two-piece rear rotors
Massive Brakes custom twin master cylinder booster eliminator with 6:1 or 7:1 pedal ratio (Power brakes can be re-installed)
Tilton Bias Bar and Wilwood in car proportioning valve
Tilton master cylinders
Tilton 3 chamber remote mount reservoir

Safety Equipment and Other Systems:
ATL 22 Gallon Fuel Cell (2017 Date Code)
Momo FIA Halo Seat
Oreca FIA 6 Point Harness (2017 Date Code)
AFFF 3 Nozzle FIA Fire System (2017 Date Code)
Window Net (2017 Date Code)
MyLaps x2 Transponder
Custom Roll Cage by Winding Road Racing
Coolshirt Driver cooling system
Full VDO Instrumentation
Innovate Motorsports MTX-L Wideband
Custom built electrical panel with aerospace breakers and switches
Dual Holley Red low-pressure feed pumps
Single Aeromotive high-pressure fuel pump
Aeromotive fuel pressure regulator
Custom Side Exit exhaust
Multiple sets of E39 Stagger fitment 8/9 Wheels with Hooiser R7 Tires (245 front/275 rear)

Delivery available within the lower 48 and I will work with a broker if international shipping is desired. The car has also been invited to the SVRA Championships this November at Circuit of the Americas. If the buyer wishes I can provide trackside support/setup etc.

Price - Unless the mods make me post something I'd like to keep this transaction private. If you are serious then please PM/Email or Call me and we can work out a price. I'd love it if this car went to a member because that's how I found it down in Florida. After July the car will be going up on more websites for sale.
VintageRacer
Posts: 87
Joined: Sat Jun 24, 2017 2:49 pm
Location: Waco, TX

Re: 1985 M635csi Chassis RA1-007 Tribute Build in Texas

Post by VintageRacer »

https://youtu.be/rwU2XdmhWRE

Video of the car going full tilt in May at the spring vintage
Post Reply