Help Support Bigcoupe.com

Early euro 633csi part out and 635csi drivetrain part out

Post in this forum for cars and/or parts for sale.

Moderators: ron, bfons, GRNSHRK

Post Reply
greer
Posts: 8
Joined: Fri Jun 05, 2015 12:50 pm
Location: Philadelphia, PA

Early euro 633csi part out and 635csi drivetrain part out

Post by greer » Thu Jul 26, 2018 6:54 pm

Hi everyone,

I have a severely rusted 1977 euro 633csi that I am parting out, drivetrain and running gear are already claimed and will be resurrecting an engineless Bavaria. The car is in pretty rough shape, interior is trashed, rear headrests are present but in very poor condition. Rear bumper/valance is dented, front bumper has a small dent and a couple rust bubbles in the chrome on the center section. Doors are straight and seem rust free, as is the trunk and hood. All glass is intact, some of the side trim is missing. Let know what you're looking for!

I am also parting out the engine/trans from my 85 635csi 5speed as I am swapping in an LS2:
SOLD Engine B34 202k miles runs fine, usual m30 cam wear, good compression - $150 for bare engine
SOLD 5 speed trans g260/6, mileage unknown(the car was originally an auto) shifts well, 2nd gear will grind on high rpm fast shifts -$250
SOLD 5speed swap parts, pedal box, new in box master and slave cylinders, stainless braided hose, driveshaft, trans crossmember(no shifter) - $300
SOLD Complete exhaust system, excellent condition, front pipes and cat are newer- $400
Good alternator, looks fairly new - $75 shipped
Rebuilt 059 ecu with d'silva chip - $150 shipped
SOLD Short shifter, unknown brand, I believe it is the one bavauto sells - $150 shipped

Open to offers, let me know if there is anything not listed you might be looking for. Local pickup is preferred for the large items, please pm me your requests and questions. I am located in Townsend, DE 19734

Image
Image
Image
Image
Last edited by greer on Fri Sep 28, 2018 2:23 pm, edited 1 time in total.

brickwhite
Bigcoupe supporter
Posts: 560
Joined: Wed Sep 01, 2010 3:29 pm
Location: Jackson, MO USA

Re: Early euro 633csi part out and 635csi drivetrain part out

Post by brickwhite » Fri Jul 27, 2018 2:28 pm

PM sent on Exhaust!
- 12 535i
- 92 325ic
- 88 535is
- 85 M635csi

- 63 Triumph Tr-4

bpoliakoff
Bigcoupe supporter
Posts: 2497
Joined: Thu Sep 28, 2006 9:28 pm
Location: scottsdale, arizona
Contact:

Re: Early euro 633csi part out and 635csi drivetrain part out

Post by bpoliakoff » Sat Jul 28, 2018 12:47 am

PM sent
81 Euro 635 M90 with motronic. Currently under a complete nut and bolt restoration. Pictures at
flickr.com/photos/bertsphotos.

station105
Bigcoupe supporter
Posts: 155
Joined: Tue Mar 16, 2010 7:15 am
Location: australia

Re: Early euro 633csi part out and 635csi drivetrain part out

Post by station105 » Sat Jul 28, 2018 3:57 am

hi, do you have speaker pods

regards

richard

rhanley 635csi89
Bigcoupe Contributor
Posts: 190
Joined: Wed Sep 10, 2014 12:08 am
Location: Arden, NC 28704
Contact:

Re: Early euro 633csi part out and 635csi drivetrain part out

Post by rhanley 635csi89 » Sat Jul 28, 2018 12:16 pm

Greer, It would be great if you'll do a "My Project" page on the LS2 swap, this has been on my list to do since I've owned the my car. Thanks, Roger
89 635CSiA (11/88 build)
AlpineWeiss II (218)/Natur(0200)
87 L6 635CSI Sold
87 MB 560SL

greer
Posts: 8
Joined: Fri Jun 05, 2015 12:50 pm
Location: Philadelphia, PA

Re: Early euro 633csi part out and 635csi drivetrain part out

Post by greer » Sat Jul 28, 2018 8:33 pm

station105 wrote:
Sat Jul 28, 2018 3:57 am
hi, do you have speaker pods

regards

richard
Richard,
Unfortunately, the speaker pods are severely sun warped and I don't think they would be of any use to anyone.

greer
Posts: 8
Joined: Fri Jun 05, 2015 12:50 pm
Location: Philadelphia, PA

Re: Early euro 633csi part out and 635csi drivetrain part out

Post by greer » Sat Jul 28, 2018 8:42 pm

rhanley 635csi89 wrote:
Sat Jul 28, 2018 12:16 pm
Greer, It would be great if you'll do a "My Project" page on the LS2 swap, this has been on my list to do since I've owned the my car. Thanks, Roger
Roger, I've been considering doing that, and probably will when I get the time. Keep an eye out!

kate24
Posts: 3
Joined: Sun Aug 06, 2017 6:02 pm
Location: socal

Re: Early euro 633csi part out and 635csi drivetrain part out

Post by kate24 » Mon Jul 30, 2018 4:35 am

Hi greer, I’m looking for the abs speed sensor for both left n right front wheels. Please let me know if you have them. Price n shipping to 91011. Thank you.
Kate24

greer
Posts: 8
Joined: Fri Jun 05, 2015 12:50 pm
Location: Philadelphia, PA

Re: Early euro 633csi part out and 635csi drivetrain part out

Post by greer » Tue Jul 31, 2018 1:59 am

Kate, sorry no abs sensors available.

Sharkbite
Posts: 2
Joined: Fri Jun 01, 2018 2:18 am
Location: Hawaii

Re: Early euro 633csi part out and 635csi drivetrain part out

Post by Sharkbite » Fri Aug 03, 2018 6:55 pm

Hi looking for a set of front kidney grills if any are available. Thank you

greer
Posts: 8
Joined: Fri Jun 05, 2015 12:50 pm
Location: Philadelphia, PA

Re: Early euro 633csi part out and 635csi drivetrain part out

Post by greer » Mon Aug 06, 2018 4:30 pm

No decent kidneys available, sorry.

Capt.howard
Posts: 6
Joined: Tue Aug 07, 2018 3:55 pm
Location: Georgia

Re: Early euro 633csi part out and 635csi drivetrain part out

Post by Capt.howard » Tue Aug 07, 2018 4:25 pm

Hey I’m new here an unable to pm, please email me at [email protected]. Need info on interior and front bumper

JLBach
Posts: 13
Joined: Thu Feb 01, 2018 8:05 pm
Location: Ann Arbor MI

Re: Early euro 633csi part out and 635csi drivetrain part out

Post by JLBach » Sun Sep 23, 2018 7:18 pm

Hello, I am looking for an M30 flywheel.
Thank you,
Jesse

User avatar
Hefeweizen
Senior Member
Posts: 2220
Joined: Thu Jul 17, 2008 1:24 pm
Location: Colorado Springs
Contact:

Re: Early euro 633csi part out and 635csi drivetrain part out

Post by Hefeweizen » Tue Sep 25, 2018 12:34 pm

How is the headliner?
Rainer
85 635CSi (Silver, Daily Driver)
79 633CSi (Red Euro, Project)

"If you think a good European mechanic is expensive, try a bad one!"

greer
Posts: 8
Joined: Fri Jun 05, 2015 12:50 pm
Location: Philadelphia, PA

Re: Early euro 633csi part out and 635csi drivetrain part out

Post by greer » Fri Sep 28, 2018 2:22 pm

The flywheel has been sold, headliner is trashed.

seattime
Posts: 1
Joined: Mon Oct 01, 2018 9:52 pm
Location: cda, id

Re: Early euro 633csi part out and 635csi drivetrain part out

Post by seattime » Mon Oct 01, 2018 10:20 pm

Hazard switch available? [email protected]

gsalaya
Posts: 2
Joined: Wed Oct 10, 2018 4:11 pm
Location: New york

Re: Early euro 633csi part out and 635csi drivetrain part out

Post by gsalaya » Wed Oct 10, 2018 4:44 pm

Looking for front bumper rubber trim, front turn signal lenses, sun visors, steering column lower plastic cover, B and C pillar inner covers.
Please contact [email protected]
Thank you

dm635
Bigcoupe supporter
Posts: 122
Joined: Thu Oct 07, 2004 2:14 pm
Location: louisville,ky

Re: Early euro 633csi part out and 635csi drivetrain part out

Post by dm635 » Sun Oct 14, 2018 7:25 pm

Looking for a set of good front bumper ends. The rubber ends that have the orange/yellow reflector. I see the last post before this one is looking for front end parts. If the ends are available I'm still looking. They need to have all the mounting studs in place. Thanks Dave
Past:
84-318i, 85-318i, 85-635 CSi, 86-635 CSi

Current:
87-635 CSi

greer
Posts: 8
Joined: Fri Jun 05, 2015 12:50 pm
Location: Philadelphia, PA

Re: Early euro 633csi part out and 635csi drivetrain part out

Post by greer » Sun Oct 21, 2018 4:42 pm

Sorry for taking so long to reply, been very busy as usual.

gsalaya I sent you an email

dm635 Sorry, I don't have any bumper ends available

29guy
Posts: 15
Joined: Sun Nov 09, 2014 10:23 pm
Location: Redmond, WA

Re: Early euro 633csi part out and 635csi drivetrain part out

Post by 29guy » Tue Oct 30, 2018 9:53 pm

Do you have both the driver's and passenger's side exterior door handle assemblies available?

Thanks

Post Reply

Who is online

Users browsing this forum: ldc and 8 guests