Euro E12 parts for sale

Post in this forum for cars and/or parts for sale.

Moderators: GRNSHRK, ron, bfons

Post Reply
Sechserreihe
Posts: 75
Joined: Sun Jun 26, 2016 7:10 pm
Location: Columbus, OH

Euro E12 parts for sale

Post by Sechserreihe »

Hi,
I've begun parting out the '79 635CSi. Have several parts off the car and for sale. Car itself still has the M90 motor in it. I'd like to sell the engine with the car just for transportation purposes. Tow it home or have it picked up and then sell to shell or god forbid call the scrap yard and recoup $250. I have a title. Chrome bottle caps should sell as well. They've got metric tires on them.

M90 motor with ECU and 127K including rolling chassis with title - $1700

Trunk lid with foam spoiler and 635CSi badge...$150. Foam spoiler is glued on pretty good. I'm not messing with it.

Front bumper is rough but but good center frame and ends. Valence is cut. chrome is missing as well as all rubber...$75

Rear bumper pretty good with exception of rubber strip that has been screwed on. Chrome ok and good rubber ends. Valence also good...$100

Taillight chrome bezels ok but each have little blister and chrome splitting on bottom. Nothing hateful. $45 ea.

Passenger side lens ok but has a crack that's been glued. hardly noticeable...$20

Front fenders (E12 not E24) good, with very little rust on bottom back edge. $75 ea.

Hood in very good condition $150

Doors in good condition. Small spot of rust in lower front corner on driver door. (I'll take pictures soon. Can't get to passenger side...sitting too close to building. $100

Picture Album here....https://imgur.com/a/BPLBTVv

Thanks,

Mark
Columbus, OH
Attachments
0110191407b.jpg
0110191407b.jpg (132.29 KiB) Viewed 14500 times
0110191406a.jpg
0110191406a.jpg (111.99 KiB) Viewed 14500 times
0110191407d.jpg
0110191407d.jpg (107.63 KiB) Viewed 14500 times
0110191407.jpg
0110191407.jpg (157.05 KiB) Viewed 14500 times
bm0635
Posts: 43
Joined: Fri Oct 12, 2018 1:03 am
Location: victoria

Re: Euro E12 parts for sale

Post by bm0635 »

are the chrome rear tail light bezels still for sale, if so keep them for me, when you reply and still available would you package them up to send to australia

regards

richard
Sechserreihe
Posts: 75
Joined: Sun Jun 26, 2016 7:10 pm
Location: Columbus, OH

Re: Euro E12 parts for sale

Post by Sechserreihe »

Hi. Yes, I'll ship anywhere. I'll box them up and get a shipping quote from post office. Is it just the chrome bezels you want or the bulb unit as well? Would probably save you a few bucks if I just shipped the bezels. Your call.

Mark
Sechserreihe
Posts: 75
Joined: Sun Jun 26, 2016 7:10 pm
Location: Columbus, OH

Re: Euro E12 parts for sale

Post by Sechserreihe »

Sold some parts today.

Decklid with spoiler...gone
front bumper...gone
rear bumper...gone
taillight bezels are spoken for

Front fenders, doors and hood still avail. So is M90 engine with or without car.

Thanks,

Mark
bm0635
Posts: 43
Joined: Fri Oct 12, 2018 1:03 am
Location: victoria

Re: Euro E12 parts for sale

Post by bm0635 »

hi mark, just the chrome bezels if its not to much trouble, i will wait for your shipping quote, just one thing to check, mine is a 1982 635 csi euro, and e24, i'm sure the rear tail lights are the same for a e12 based car, can you confirm

regards

richard
bm0635
Posts: 43
Joined: Fri Oct 12, 2018 1:03 am
Location: victoria

Re: Euro E12 parts for sale

Post by bm0635 »

hi mark,
forgot to give you my address for the bezels if they are okay for e24

RICHARD OSCIAK
7 SANCTUARY BOULEVARD
WODONGA VICTORIA 3690
AUSTRALIA
Sechserreihe
Posts: 75
Joined: Sun Jun 26, 2016 7:10 pm
Location: Columbus, OH

Re: Euro E12 parts for sale

Post by Sechserreihe »

These will work on your car. I will take some detailed pictures of them in the morning to make sure you're ok with their condition. Then I'll quote you the shipping cost.

Mark
brickwhite
Posts: 797
Joined: Wed Sep 01, 2010 3:29 pm
Location: Broomfield, CO

Re: Euro E12 parts for sale

Post by brickwhite »

Any interior parts? Looking for visor bezel
- 12 535i
- 92 325ic
Sechserreihe
Posts: 75
Joined: Sun Jun 26, 2016 7:10 pm
Location: Columbus, OH

Re: Euro E12 parts for sale

Post by Sechserreihe »

Here are some better pix of the taillight bezels. You can clearly that on each bezel there's one imperfection with chrome starting to blister a bit. Shipping to Australia will run $67.10. That's the cheapest route.

thanks and let me know...

Mark
Attachments
0112191335b.jpg
0112191335b.jpg (815.94 KiB) Viewed 14414 times
0112191335a.jpg
0112191335a.jpg (705.7 KiB) Viewed 14414 times
0112191335.jpg
0112191335.jpg (698.97 KiB) Viewed 14414 times
0112191334.jpg
0112191334.jpg (733.21 KiB) Viewed 14414 times
Sechserreihe
Posts: 75
Joined: Sun Jun 26, 2016 7:10 pm
Location: Columbus, OH

Re: Euro E12 parts for sale

Post by Sechserreihe »

Sorry, I do not. Just a headliner that's in so-so condition.

Thanks,
Mark
Attachments
0112191448.jpg
0112191448.jpg (755.78 KiB) Viewed 14412 times
Sechserreihe
Posts: 75
Joined: Sun Jun 26, 2016 7:10 pm
Location: Columbus, OH

Re: Euro E12 parts for sale

Post by Sechserreihe »

Still have this chassis with M90 engine installed. I'm selling the complete exhaust system from down-pipes back to muffler. Previous owner had cut it into 3 sections. This will make it easy to ship I suppose. $280. Center resonator and rear muffler are in great shape. Some evidence of welding has been done to down-pipe sections.

Also selling the Euro gas tank. It's in real nice shape. Inside looks very nice. $180

Still have front fenders, doors, pedal cluster and brakes.

Thanks,

Mark
Attachments
0128191010a.jpg
0128191010a.jpg (1.18 MiB) Viewed 14191 times
0128191329a.jpg
0128191329a.jpg (1.37 MiB) Viewed 14191 times
User avatar
Klaus
Posts: 221
Joined: Mon Dec 18, 2006 4:03 am
Location: Las Vegas, NV

Re: Euro E12 parts for sale

Post by Klaus »

By any chance is the left, driver side quarter panel molding still on the vehicle? All I am missing is the little plastic end piece toward the driver's door. I don't care what the rest of the molding looks like.
Please let me know.

Klaus
Sechserreihe
Posts: 75
Joined: Sun Jun 26, 2016 7:10 pm
Location: Columbus, OH

Re: Euro E12 parts for sale

Post by Sechserreihe »

Update on what's left on the '79 Euro 635CSi. Pulled the engine today.

M90 Motor on blocks in the garage. Comes with harness and computer. 128K mls. Compression test results are 155, 150, 150, 160, 155, 125.
$1200

Driver and passenger side early E12 fenders. Pix tell the story. Both good shape but have some rust along bottom edge.
$100 each

Euro gas tank in great shape. No rust inside and no seam rust.
$180

Oil Cooler
$75

Hood in good shape. No visible damage.
$100

Exhaust system that's been butchered together. Euro spec collector pipes and center pieces but US resonator and muffler welding in.
$100

Lots of pix here....

https://imgur.com/gallery/eblE0JZ

Thanks,

Mark
User avatar
ekimp
Posts: 29
Joined: Mon May 27, 2013 6:41 pm
Location: USA

Re: Euro E12 parts for sale

Post by ekimp »

Do you happen to have the drivers door left? Looking for a handle/door carrier assembly and possibly a window motor/regulator if you have one.
Current Bavarians-
'82 635CSi Euro- Hennarot/Tan Recaro, CR Dogleg
'75 2002- Taiga/Tan
'19 i3 REX
Previous sharks-
'81 635CSi Euro- Hennarot/Black Recaro, CR Dogleg
'86 635CSi- Arktisblau/Tan Recaro interior, 5 speed
Sechserreihe
Posts: 75
Joined: Sun Jun 26, 2016 7:10 pm
Location: Columbus, OH

Re: Euro E12 parts for sale

Post by Sechserreihe »

Sorry, no doors left. Only the hood, both fenders and the M90 engine.

Thanks,

Mark
buddha
Posts: 41
Joined: Sat Sep 20, 2014 7:14 pm
Location: Spartanburg SC

Re: Euro E12 parts for sale

Post by buddha »

ekimp wrote: Mon Feb 11, 2019 11:12 pm Do you happen to have the drivers door left? Looking for a handle/door carrier assembly and possibly a window motor/regulator if you have one.
I have a driver’s door handle. Message me, if still needed.
joe boston
Posts: 14
Joined: Wed Mar 22, 2017 6:45 pm
Location: Winchester, MA

Re: Euro E12 parts for sale

Post by joe boston »

Hi do you still have the oil cooler and lines?
thanks
MyE24
Posts: 2
Joined: Wed Jun 06, 2018 2:20 am
Location: Carmel, Indiana

Re: Euro E12 parts for sale

Post by MyE24 »

Sechserreihe wrote: Mon Jan 28, 2019 11:41 pm
Also selling the Euro gas tank. It's in real nice shape. Inside looks very nice. $180

Thanks,

Mark
Hi Mark,I have a 9/84 euro e24 white I *think* uses the same fuel tank as yours. If so, I'd like to make a deal - I'm in Indiana.

Thanks
Chris
Sechserreihe
Posts: 75
Joined: Sun Jun 26, 2016 7:10 pm
Location: Columbus, OH

Re: Euro E12 parts for sale

Post by Sechserreihe »

Sorry, I sold that tank.

MP
mccusername
Posts: 1
Joined: Tue Sep 24, 2019 12:57 am
Location: CA

Re: Euro E12 parts for sale

Post by mccusername »

Please PM me if M90 engine is still for sale.
Thanks
Michael
Caribe Turf
Posts: 45
Joined: Tue Jul 07, 2015 12:45 am
Location: Puerto Rico
Contact:

Re: Euro E12 parts for sale

Post by Caribe Turf »

How much do you want for the headliner?
2000 BMW Z3
1991 BMW 318is
1987 BMW M6
1980 320i
Post Reply