Clearing left over parts
Moderators: GRNSHRK, ron, bfons
-
- Posts: 212
- Joined: Wed Nov 20, 2013 4:17 pm
- Location: Massachusetts, U.S.
Clearing left over parts
Here is all that is left lying in the garage that I would like to clear out. Trying to fund the project to get it back on the road. Would also be interested in trading parts as well! All parts are off a late 88 auto 635csi.
Prices Do not include shipping
Mirrors: not perfect not terrible, unsure of condition of the motors. $35
Getrag g265 trans mount: Bought new from ECS never used, Dont need it any longer: $65
Glovebox Lower plastic panel: $40
Interior Door panel Parts & Ski Pass bolster?
Front $15
Rear $40 each
Bolster $5
Headlight Grilles one I painted looks great, other side needs to be cleaned and painted with signal housings $100
World Bumper covers: Not in perfect shape and need some work, but all intact $100
Suspension: Front and rear. Rears are aftermarket with Eibach progressive springs, Fronts have some kind of camber plates. Good to build for coilovers. $125 for everything
Front Calipers: painted red for more speed, unsure of condition $50
Misc Trim pieces: Most of them are fairly straight, some perfect, some kinda trashed (mostly the longer pieces): $ make offer
Door Seals Not perfect, but definitely better than the ones on my project car. Pretty decent shape, only some small tears $150
E28 non-powered comfort seat bracket (what people use to adapt recaros to E28s/E24s); $75
[img]https://i.imgur.com/Jyxk0Xy.jpg?1[/img]
Front Headliner Panel: in perfect shape other than the broken cardboard bits on the back that hold it in, definitely repairable and usable. $45
ECU connector plug Harness was cut poorly so I saved this and what I could. $35
Misc Parts: Make offer
Prices Do not include shipping
Mirrors: not perfect not terrible, unsure of condition of the motors. $35
Getrag g265 trans mount: Bought new from ECS never used, Dont need it any longer: $65
Glovebox Lower plastic panel: $40
Interior Door panel Parts & Ski Pass bolster?
Front $15
Rear $40 each
Bolster $5
Headlight Grilles one I painted looks great, other side needs to be cleaned and painted with signal housings $100
World Bumper covers: Not in perfect shape and need some work, but all intact $100
Suspension: Front and rear. Rears are aftermarket with Eibach progressive springs, Fronts have some kind of camber plates. Good to build for coilovers. $125 for everything
Front Calipers: painted red for more speed, unsure of condition $50
Misc Trim pieces: Most of them are fairly straight, some perfect, some kinda trashed (mostly the longer pieces): $ make offer
Door Seals Not perfect, but definitely better than the ones on my project car. Pretty decent shape, only some small tears $150
E28 non-powered comfort seat bracket (what people use to adapt recaros to E28s/E24s); $75
[img]https://i.imgur.com/Jyxk0Xy.jpg?1[/img]
Front Headliner Panel: in perfect shape other than the broken cardboard bits on the back that hold it in, definitely repairable and usable. $45
ECU connector plug Harness was cut poorly so I saved this and what I could. $35
Misc Parts: Make offer
- hornhospital
- Platinum Member
- Posts: 2931
- Joined: Sun Jul 11, 2010 6:46 pm
- Location: Silverhill, AL
- Contact:
Re: Clearing left over parts
I'll take the struts/shocks/springs. PM sent.
Ken Kanne
'84 633CSi "Sylvia"; '85 635CSi "Katja";'85 325e "Hazel Ann"; '95 M3 "Ashlyn"
'84 633CSi "Sylvia"; '85 635CSi "Katja";'85 325e "Hazel Ann"; '95 M3 "Ashlyn"
- hornhospital
- Platinum Member
- Posts: 2931
- Joined: Sun Jul 11, 2010 6:46 pm
- Location: Silverhill, AL
- Contact:
Re: Clearing left over parts
You have PM. Been sitting in my outbox for days.
Ken Kanne
'84 633CSi "Sylvia"; '85 635CSi "Katja";'85 325e "Hazel Ann"; '95 M3 "Ashlyn"
'84 633CSi "Sylvia"; '85 635CSi "Katja";'85 325e "Hazel Ann"; '95 M3 "Ashlyn"
Re: Clearing left over parts
Interested in the mirrors, shipping to Las Vegas NV, let me know.
Klaus
Klaus
-
- Posts: 212
- Joined: Wed Nov 20, 2013 4:17 pm
- Location: Massachusetts, U.S.
Re: Clearing left over parts
Just saw your response, I send you a PM with the details.kylefav390 wrote: ↑Mon Jul 01, 2019 1:54 amSure, whats the zip code? can get them sent out as early as tomorrow if necessary.
Thanks,
Klaus
Last edited by Klaus on Thu Jul 04, 2019 6:12 pm, edited 1 time in total.
Re: Clearing left over parts
Sent you a PM about the bumper covers.
Thanks
Thanks
-
- Posts: 212
- Joined: Wed Nov 20, 2013 4:17 pm
- Location: Massachusetts, U.S.
-
- Posts: 797
- Joined: Wed Sep 01, 2010 3:29 pm
- Location: Broomfield, CO
-
- Posts: 212
- Joined: Wed Nov 20, 2013 4:17 pm
- Location: Massachusetts, U.S.
Re: Clearing left over parts
Mirrors sold, bumper covers sold, and struts are pending sale.
-
- Posts: 212
- Joined: Wed Nov 20, 2013 4:17 pm
- Location: Massachusetts, U.S.
Re: Clearing left over parts
bump! suspension sold
-
- Posts: 212
- Joined: Wed Nov 20, 2013 4:17 pm
- Location: Massachusetts, U.S.
Re: Clearing left over parts
Bump! Trans mount sold
-
- Posts: 45
- Joined: Tue Jul 07, 2015 12:45 am
- Location: Puerto Rico
- Contact:
Re: Clearing left over parts
Rear seat belts receivers still available?
2000 BMW Z3
1991 BMW 318is
1987 BMW M6
1980 320i
1991 BMW 318is
1987 BMW M6
1980 320i
-
- Posts: 212
- Joined: Wed Nov 20, 2013 4:17 pm
- Location: Massachusetts, U.S.
Re: Clearing left over parts
Yes they sure are. All yours if you want them.
-
- Posts: 45
- Joined: Tue Jul 07, 2015 12:45 am
- Location: Puerto Rico
- Contact:
Re: Clearing left over parts
sent you a PM give me price with shipping to 00738
2000 BMW Z3
1991 BMW 318is
1987 BMW M6
1980 320i
1991 BMW 318is
1987 BMW M6
1980 320i
- 86_6series
- Platinum Member
- Posts: 1069
- Joined: Mon Apr 02, 2007 10:08 pm
- Location: West Nyack, NY
Re: Clearing left over parts
Looks like it's a world bumper car.
Could you cut the harnesses going to fog lights,
I'm in need of pigtails for world bumper conversion.
Shipping to 10994
Could you cut the harnesses going to fog lights,
I'm in need of pigtails for world bumper conversion.
Shipping to 10994
86-635CSi
96-MB C220 SOLD
98-740i
71-Continental MK3
96-MB C220 SOLD
98-740i
71-Continental MK3
-
- Bigcoupe Contributor
- Posts: 323
- Joined: Wed Sep 10, 2014 12:08 am
- Location: Arden, NC 28704
Re: Clearing left over parts
Will fog pig tails work from a 11/86 L6 635 build date? Send me a pm if yes. Roger
89 635CSiA (11/88 build)
AlpineWeiss II (218)/Natur(0200)
87 L6 635CSI Sold
87 MB 560SL Sold
AlpineWeiss II (218)/Natur(0200)
87 L6 635CSI Sold
87 MB 560SL Sold
- 86_6series
- Platinum Member
- Posts: 1069
- Joined: Mon Apr 02, 2007 10:08 pm
- Location: West Nyack, NY
Re: Clearing left over parts
No, the World Bumpers started 6/87.
thanks
thanks
86-635CSi
96-MB C220 SOLD
98-740i
71-Continental MK3
96-MB C220 SOLD
98-740i
71-Continental MK3
- Hefeweizen
- Posts: 2324
- Joined: Thu Jul 17, 2008 1:24 pm
- Location: Colorado Springs
- Contact:
Re: Clearing left over parts
I actually came across one pigtail and If I am not mistaken I made one out of cable connectors. PM me your address and I mail the one I have to you.
Rainer
03 330Xi (DD)
85 635CSi (RIP 3 May 19)
80 633CSi (Red Euro, Project)
"If you think a good European mechanic is expensive, try a bad one!"
03 330Xi (DD)
85 635CSi (RIP 3 May 19)
80 633CSi (Red Euro, Project)
"If you think a good European mechanic is expensive, try a bad one!"
-
- Posts: 45
- Joined: Tue Jul 07, 2015 12:45 am
- Location: Puerto Rico
- Contact:
Re: Clearing left over parts
did you receive my payment for the rear seat belts?
2000 BMW Z3
1991 BMW 318is
1987 BMW M6
1980 320i
1991 BMW 318is
1987 BMW M6
1980 320i
-
- Posts: 45
- Joined: Tue Jul 07, 2015 12:45 am
- Location: Puerto Rico
- Contact:
Re: Clearing left over parts
I received the rear seat belt ends today. Thanks! I PM you for some other parts.
2000 BMW Z3
1991 BMW 318is
1987 BMW M6
1980 320i
1991 BMW 318is
1987 BMW M6
1980 320i
Re: Clearing left over parts
Hi I'm looking for a right hand drive version of the glovebox lower plastic panel. If you could, please can you tell me the part number, as it might help me find it in the UK? Thanks
1988 e24 635csia Shadowline Delphin Grey, Lotus White
2005 e64 650i Black convertible
2010 f11 520d touring Champagne
2018 R9T 1200 motorbike
2005 e64 650i Black convertible
2010 f11 520d touring Champagne
2018 R9T 1200 motorbike
-
- Posts: 212
- Joined: Wed Nov 20, 2013 4:17 pm
- Location: Massachusetts, U.S.