FS: 3:65 Torsen LSD (rear-loader), $350, CA

[billy bee]

Long story, but we got this to use in our race car. It helps a lot, but we have stiffened up the car enough that we now get some wheel spin, even with the Torsen. It'll work well on a softer sprung car. We get too much wheel lift with our stiffer anti-roll bar set-up. A clutch-type LSD won't fix the wheel lift, but it will limit wheel spin when the inside wheel gets light.

This will not fit the early E24. It will only fit the E28-based cars with the later subframe. You will need to retain your diff cover as we will be retaining our diff cover.

$350 plus shipping or pick it up in San Luis Obispo, CA for $300 (which is a good deal!)

--bb

[jamorr6964]

Need a new diff to replace my 3.65 LSD medium case for '89 635CSi. Will this work without modification? Any condition problems?

[billy bee]

Need a new diff to replace my 3.65 LSD medium case for '89 635CSi. Will this work without modification? Any condition problems?

I think it'll work just fine. It's in good condition; no problems. However, you are second in line. Let me reply to the first guy and circle back with you...

Thanks,
Bill

[geob415]

Hey! I'm in the Bay Area and would be happy to come down and pick this up. I have an 89 635CSI and I'm doing a manual swap. The 3.91 is nice and all but this is what I might be more comfortable with. I'm sending you a PM.

[geob415]

I actually don't have the ability to pm yet, but I'm still interested! email is [email protected]

[Shark2013]

Late to the party on this post - is the diff still available? I am located just north of Nipomo.

Thanks

[billy bee]

Hi guys:

Sorry to take so long to get back you everybody about this LSD. We are going to hold onto it as a spare for now. Sorry for the false alarm. I will revive this post if we decide to sell it.

Thanks,
Bill

[GRNSHRK]

Bill, do you want me to pull this thread so that nobody inquires for now

Just lemme know

Couple of quick key strokes