Looking for the following:
1. Left headlamp cover - this is a plastic part the is in the engine bay and covers the back side of the headlamps. There are different versions (even for M635 and M6). The picture on the red car is a 87 US M6. If you have the left headlamp cover I believe it will not have the hole for the cast aluminum elbow to fit into. I’m hoping that (if you have one) it will at least be the same shape and I can cut a hole for the elbow. (I would hope that the supplier would have had one tool for both parts and just insert to create the pass-through hole.) The image from realoem.com also shows the part as numbers 10 and 11.
2. Central locking module - (If your vehicle is equipped) My central locking is only working intermittently and I’m hoping it’s the module. All key locations stopped working at once, so I’m thinking it’s not associated with any of the locks. The part number should be on the module (61311380302). Same as discussed in this recent thread: viewtopic.php?f=5&t=31765&p=226625&hili ... 02#p226545
Thanks
Scott
1986 635csi parting out
Moderators: GRNSHRK, ron, bfons
Re: 1986 635csi parting out
- Attachments
-
- Realoem image of BMW 6 series headlamp cover.jpg (54.1 KiB) Viewed 1519 times
-
- 1988 M6 Air Inlet and Filter.JPG (117.35 KiB) Viewed 1519 times
1988 M6
Re: 1986 635csi parting out
Need the metal pipe off the hydra booster regulator. Item #13
https://www.realoem.com/bmw/enUS/showpa ... Id=34_0294
https://www.realoem.com/bmw/enUS/showpa ... Id=34_0294
'84 Euro 635
"You can sleep in your car, but you can't drive your house"
"You can sleep in your car, but you can't drive your house"
-
- Posts: 5
- Joined: Mon Sep 21, 2020 3:41 am
- Location: Michigan
Re: 1986 635csi parting out
Haven’t read the entire thread, Looking for a dash?....
Re: 1986 635csi parting out
Any chance you still have the C101 connector pigtail (connected to fusebox)?