WTB: Rear Strut Brace
Moderators: GRNSHRK, ron, bfons
- Masked Man
- Platinum Member
- Posts: 1301
- Joined: Sat Jun 28, 2008 5:46 pm
- Location: Los Angeles, CA
WTB: Rear Strut Brace
Hey folks!
I know I've seen this item, but was it a custom unit short run or NLA item? It (obviously) went between the rear shock towers and -I believe- attached to the trunk floor? I have checked several online outlets and have come up empty. Since Grace is presently as accessible as an E24 is gonna get, I reckon now is the time. I figure I'll also drop new shocks in the rear. All aid appreciated.
Keep the shiny side up
Phillip
I know I've seen this item, but was it a custom unit short run or NLA item? It (obviously) went between the rear shock towers and -I believe- attached to the trunk floor? I have checked several online outlets and have come up empty. Since Grace is presently as accessible as an E24 is gonna get, I reckon now is the time. I figure I'll also drop new shocks in the rear. All aid appreciated.
Keep the shiny side up
Phillip
Masked Man
85 635CSi Euro
Big Brake Upgrade
Ireland stainless exhaust
Upper & lower control arms
New tie rod kit
85 635CSi Euro
Big Brake Upgrade
Ireland stainless exhaust
Upper & lower control arms
New tie rod kit
Re: WTB: Rear Strut Brace
There was one for E28's known as a tow package brace, but now very difficult to find... I have a Mason engineering rear brace and it tucks up under the trunk carpeting which I like...
http://www.Drive4Corners.com
'79 635CSi Revival
'80 635CSi
'83 633CSi Callaway Turbo continued as 1988 535is Turbo
SOLD: '81 635CSi/A
'79 635CSi Revival
'80 635CSi
'83 633CSi Callaway Turbo continued as 1988 535is Turbo
SOLD: '81 635CSi/A
-
- Platinum Member
- Posts: 3320
- Joined: Thu Sep 28, 2006 9:28 pm
- Location: scottsdale, arizona
- Contact:
Re: WTB: Rear Strut Brace
+1 on Mason Engineering/ They are in No CA and you can google them. He makes a high quality product
81 Euro 635 M90 with motronic. Currently under a complete nut and bolt restoration. Pictures at
flickr.com/photos/bertsphotos.
flickr.com/photos/bertsphotos.
- Masked Man
- Platinum Member
- Posts: 1301
- Joined: Sat Jun 28, 2008 5:46 pm
- Location: Los Angeles, CA
Re: WTB: Rear Strut Brace
Thanks guys!
I've found their website. Do you both feel like the unit improves rear-end stiffness commensurate with the investment?
Keep the shiny side up
Phillip
I've found their website. Do you both feel like the unit improves rear-end stiffness commensurate with the investment?
Keep the shiny side up
Phillip
Masked Man
85 635CSi Euro
Big Brake Upgrade
Ireland stainless exhaust
Upper & lower control arms
New tie rod kit
85 635CSi Euro
Big Brake Upgrade
Ireland stainless exhaust
Upper & lower control arms
New tie rod kit
-
- Platinum Member
- Posts: 498
- Joined: Sat Apr 03, 2004 2:57 pm
- Location: Healdsburg, NorCal & Baja Sur, MX
Re: WTB: Rear Strut Brace
Wiechers Sport also an option..
http://www.wiechers-sport.de/en/shop/do ... ten-detail
http://www.wiechers-sport.de/en/shop/do ... ten-detail
http://www.wiechers-sport.de/en/shop/do ... ten-detail
http://www.wiechers-sport.de/en/shop/do ... ten-detail
DV
Motorsport & Vintage Coupes
ALPINA Oldtimers of Course...
BMW-Classic CCA
Motorsport & Vintage Coupes
ALPINA Oldtimers of Course...
BMW-Classic CCA
Re: WTB: Rear Strut Brace
Actually I don't know that it does help all that much. I had one in my e28 (but took it out later) and one in the E24 only because I use it at the track. The rear is pretty stiff with the rear bulkhead so I probably wouldn't spend for it on a street car. The front one helps if you get non hinged (like Mason) since the front doesn't have a lot of cross bracing from the factory...
http://www.Drive4Corners.com
'79 635CSi Revival
'80 635CSi
'83 633CSi Callaway Turbo continued as 1988 535is Turbo
SOLD: '81 635CSi/A
'79 635CSi Revival
'80 635CSi
'83 633CSi Callaway Turbo continued as 1988 535is Turbo
SOLD: '81 635CSi/A
- Masked Man
- Platinum Member
- Posts: 1301
- Joined: Sat Jun 28, 2008 5:46 pm
- Location: Los Angeles, CA
Re: WTB: Rear Strut Brace
Many thanks folks!
Thank you, DV, Bert & Tschultz. Your point regarding need, is a good one, Tschultz, I think I'll pass on the rear for the moment and just go with a rigid front unit. Oh Bert? Mason Engineering is in Simi Valley here in SoCal. And DV, while the Weicher product looks to be good quality? I believe I'll go with one I can drive to and pick up.
Again, my thanks for your valuable insights
Keep the shiny side up
Phillip
Thank you, DV, Bert & Tschultz. Your point regarding need, is a good one, Tschultz, I think I'll pass on the rear for the moment and just go with a rigid front unit. Oh Bert? Mason Engineering is in Simi Valley here in SoCal. And DV, while the Weicher product looks to be good quality? I believe I'll go with one I can drive to and pick up.
Again, my thanks for your valuable insights
Keep the shiny side up
Phillip
Masked Man
85 635CSi Euro
Big Brake Upgrade
Ireland stainless exhaust
Upper & lower control arms
New tie rod kit
85 635CSi Euro
Big Brake Upgrade
Ireland stainless exhaust
Upper & lower control arms
New tie rod kit
-
- Platinum Member
- Posts: 3320
- Joined: Thu Sep 28, 2006 9:28 pm
- Location: scottsdale, arizona
- Contact:
Re: WTB: Rear Strut Brace
Well, the least you can do is to get the wonderful pictures you used to come up with every Friday, back in the "saloon"
81 Euro 635 M90 with motronic. Currently under a complete nut and bolt restoration. Pictures at
flickr.com/photos/bertsphotos.
flickr.com/photos/bertsphotos.
- Masked Man
- Platinum Member
- Posts: 1301
- Joined: Sat Jun 28, 2008 5:46 pm
- Location: Los Angeles, CA
Re: WTB: Rear Strut Brace
Bert?
You're trying to get me in trouble. You KNOW the admins put an end to all that. And I'm fine with that.
Keep the shiny side up
Phillip
You're trying to get me in trouble. You KNOW the admins put an end to all that. And I'm fine with that.
Keep the shiny side up
Phillip
Masked Man
85 635CSi Euro
Big Brake Upgrade
Ireland stainless exhaust
Upper & lower control arms
New tie rod kit
85 635CSi Euro
Big Brake Upgrade
Ireland stainless exhaust
Upper & lower control arms
New tie rod kit
-
- Platinum Member
- Posts: 3320
- Joined: Thu Sep 28, 2006 9:28 pm
- Location: scottsdale, arizona
- Contact:
Re: WTB: Rear Strut Brace
Can't believe a dirty old man such as Bobbo would do that to us. maybe because of his age he is afraaid of heart attacks happening. Oh well!!
Nice to see you back
Nice to see you back
81 Euro 635 M90 with motronic. Currently under a complete nut and bolt restoration. Pictures at
flickr.com/photos/bertsphotos.
flickr.com/photos/bertsphotos.
Re: WTB: Rear Strut Brace
They are ALWAYS rustier than you thought!!!!!!
'85 M #228
'87 M #367
'88 High line.
'10 X5
‘84 Alfasud 1.5 ti
'85 M #228
'87 M #367
'88 High line.
'10 X5
‘84 Alfasud 1.5 ti
Re: WTB: Rear Strut Brace
Didn't I see some sort of sub frame assembly in the rear of Ron's car (while at Legends) that also mounts his battery? For those of us without M cars, this would provide an added weight distribution bonus?
1981 635 Hennarot
1980 635 Polaris (Project)
1980 635 Polaris (Project)
-
- Platinum Member
- Posts: 3726
- Joined: Thu Apr 08, 2004 3:24 pm
- Location: Gilroy (SF Bay Area) CA
Re: WTB: Rear Strut Brace
Hey, I resemble that remark
So that won't be happening again, sorry to say
Actually wasn't my idea, Brian was getting a lot of hits from guys wanting to join the board for that sole purposeCan't believe a dirty old man such as Bobbo would do that to us
So that won't be happening again, sorry to say
Bobbo
1980 633 CSi Cypress Green/Pearl Beige
2017 X5 M Sport Xdrive 35i Carbon Black/Ivory White
2005 330 Ci ZHP Cabrio Imola Red/Bone/Black
-
- Platinum Member
- Posts: 498
- Joined: Sat Apr 03, 2004 2:57 pm
- Location: Healdsburg, NorCal & Baja Sur, MX
Re: WTB: Rear Strut Brace
Bobbo installed this set-up some time ago..
viewtopic.php?f=17&t=17172&p=122387&hil ... ce#p122387
viewtopic.php?f=17&t=17172&p=122387&hil ... ce#p122387
DV
Motorsport & Vintage Coupes
ALPINA Oldtimers of Course...
BMW-Classic CCA
Motorsport & Vintage Coupes
ALPINA Oldtimers of Course...
BMW-Classic CCA
- Masked Man
- Platinum Member
- Posts: 1301
- Joined: Sat Jun 28, 2008 5:46 pm
- Location: Los Angeles, CA
Re: WTB: Rear Strut Brace
Everything I'm learning points towards no need for a rear strut brace especially since I'm not planning on tracking Grace, AND that a rigid front strut bar is superior to one with swivel points. And of the links posted to this thread so far, only Mason Engineering is rigid.
http://www.masonengineering.net/Subpages/E24.htm
Keep the shiny side up
Phillip
http://www.masonengineering.net/Subpages/E24.htm
Keep the shiny side up
Phillip
Last edited by Masked Man on Wed Sep 13, 2017 3:06 am, edited 1 time in total.
Masked Man
85 635CSi Euro
Big Brake Upgrade
Ireland stainless exhaust
Upper & lower control arms
New tie rod kit
85 635CSi Euro
Big Brake Upgrade
Ireland stainless exhaust
Upper & lower control arms
New tie rod kit
Re: WTB: Rear Strut Brace
Hey Phillip.
I got front and rear braces on my e24.
Best thing I ever done for them. The rear one balanced out the car and gives a neutral cornering attitude rather than under steer.
It's kind of like same result as stiffening up the rear anti-roll bar.
I got front and rear braces on my e24.
Best thing I ever done for them. The rear one balanced out the car and gives a neutral cornering attitude rather than under steer.
It's kind of like same result as stiffening up the rear anti-roll bar.
BMW’s
84 E24 M635csi
90 E34 M5 3.6
94 E34 540i/6 SC E85
97 E36 M3 euro SC U/C
97 Z3 2.8 widebody
OTHERS
11 Audi S5 3.0 SC
19 VW Amarok V6
84 E24 M635csi
90 E34 M5 3.6
94 E34 540i/6 SC E85
97 E36 M3 euro SC U/C
97 Z3 2.8 widebody
OTHERS
11 Audi S5 3.0 SC
19 VW Amarok V6