Style 5's sit way too far in wheel well.....

Post in this forum for topics relating to tires and wheels

Moderators: GRNSHRK, ron, bfons

Post Reply
goodm3
Posts: 10
Joined: Tue Sep 10, 2013 2:55 am
Location: Miami, FL

Style 5's sit way too far in wheel well.....

Post by goodm3 »

I was really surprised how far 17 x 8 Style 5 wheels sit in the wheel well. They really look "weak". As much as I have spacers, i just spent $300 on H&R bolt on 25mm spacer. Also bought hub centric rings. Will post pics after spacers.
Image
Image
Image
Image
1985 M635
2014 650i Gran Coupe
1991 M5 (Sold)
2011 335d (Sold)
GazM3
Posts: 1791
Joined: Wed Oct 26, 2011 12:55 pm
Location: Melbourne, Australia

Re: Style 5's sit way too far in wheel well.....

Post by GazM3 »

Yes they fit a fair way in. Even on the front. Looks like the rear could use even more spacer than 25mm
BMW’s
84 E24 M635csi
90 E34 M5 3.6
94 E34 540i/6 SC E85
97 E36 M3 euro SC U/C
97 Z3 2.8 widebody

OTHERS
11 Audi S5 3.0 SC
19 VW Amarok V6
User avatar
Soperman
Posts: 537
Joined: Tue Nov 25, 2014 2:44 pm
Location: London, UK

Re: Style 5's sit way too far in wheel well.....

Post by Soperman »

This is a topic that strikes a chord with me, as at one point I spent a great deal of time deliberating and researching a non-metric but period looking wheel option for my car.

For the benefit of those who haven't looked too deeply into the subject, I found that there can be a variety of visual effects when fitting Style 5's, (which is BMW's speak for the two piece BBS RC with 5 x 120 PCD) because they are not necessarily all the same. There were numerous variations fitted to different BMWs as OEM equipment.

For example, the BBS RC090 is a 17" x 8" but with a centre bore of 74.1mm (hence the need for rings to prevent them from "rattling around" on the hub )These were commonly fitted to the E39 5 series, so are not too hard to find. I am guessing the these are the ones fitted goodm3's car.

Other BBS RC fitted to 7 and 8 series cars are more scarce, can offer a more aggressive and contemporary look, and are therefore more valuable. A decent Style 5 solution/look on an E24 (to my mind) are these staggered front and rear....

BBS RC035 17x 8", CB 72.6, ET20
BBS RC038 17"x9", CB 72.6, ET20

Personally, I think a 17 inch diameter wheel is the max for an E24, but there are also...

BBS RC061 18"x8.5", CB72.6, ET20
BBS RC062 18"x9", CB72.6, ET22

Of course, the solution of fitting spacers to push the wheels out for a more "stanced" look is an option, but there is an argument to suggest that doing so deviates too much from original and optimal suspension geometry, resulting in an adverse effect dynamics and additional strain on the suspension components.

Anyway "goodm3", your '85 M635 is a fine looking car, and I too would be keen to see pictures after those spacers have been fitted.

Keep us posted buddy.
Last edited by Soperman on Wed Oct 18, 2017 10:34 am, edited 1 time in total.
E24 M635CSi
wattsmonkey
Platinum Member
Platinum Member
Posts: 1649
Joined: Mon Jul 16, 2007 2:58 pm
Location: Cheltenham, U.K.

Re: Style 5's sit way too far in wheel well.....

Post by wattsmonkey »

The 8 series 17" Style 5s fill the arches on an M just right:

RC009 8" et10
RC010 9" et19

Not sure if I've remembered offsets exactly, but that's the reason I spent the money on 8er wheels rather than the much, much cheaper E39 versions. The centre bore being the right size was another reason!

My ideal set up would be the 8" "fronts" all round.
"Most of it necessary; all of it enjoyable." LJKS
'84 635CSi, dogleg...itbs and supercharger????? Eaton Mess
User avatar
Soperman
Posts: 537
Joined: Tue Nov 25, 2014 2:44 pm
Location: London, UK

Re: Style 5's sit way too far in wheel well.....

Post by Soperman »

With those offset figures, I'd agree with you Rob that they would look very good indeed on an E24.
Are yours still on your car with black spokes?
E24 M635CSi
wattsmonkey
Platinum Member
Platinum Member
Posts: 1649
Joined: Mon Jul 16, 2007 2:58 pm
Location: Cheltenham, U.K.

Re: Style 5's sit way too far in wheel well.....

Post by wattsmonkey »

They are indeed! I didn't think I'd like the black bits, but they suit the car well. The grey powder-coated lips are bubbling under the bolts (plus they are titanium nuts and bolts rather than splined originals) so a refurb will be on the cards.

Cheers,

Rob
"Most of it necessary; all of it enjoyable." LJKS
'84 635CSi, dogleg...itbs and supercharger????? Eaton Mess
User avatar
tschultz
Posts: 2513
Joined: Wed Jul 07, 2010 10:54 pm
Location: Colorado
Contact:

Re: Style 5's sit way too far in wheel well.....

Post by tschultz »

I have ran 12mm spacers front and rear to get a better fit for wheels that are et20. Equivalent to wheels that are 16x8 et8 and there is still room in the rear (this is e12 based car fyi).

Image

This is why BBS RS 211 are a great fit 16 x 8 et11 so no spacers or hub rings required.

Image

I don't think 10mm will be much of an adjustment to the suspension geometry to cause noticeable premature wear. I bought another set of wheels with this offset and want to refinish them and then turn them into my tracks wheels rather than the BBS RS's.
http://www.Drive4Corners.com
Image
'79 635CSi Revival
'80 635CSi
'83 633CSi Callaway Turbo continued as 1988 535is Turbo
SOLD: '81 635CSi/A
goodm3
Posts: 10
Joined: Tue Sep 10, 2013 2:55 am
Location: Miami, FL

Re: Style 5's sit way too far in wheel well.....

Post by goodm3 »

The 17" x 9"'s are hard to find, and I still think they'll need spacers. I may end up widening the rear style 5's to get the look that I want. I am not trying to get perfect flushed stance, with stretched tires, but I certainly don't like the current weak look. Below are the pictures of the OZ 18" wheels I've had on the car for a decade. The offset was nice, but they were never my favorite wheel, and I always thought 18" were just a bit big. Most importantly, the car had a shake I could never rid of. I've tried replacing suspension parts, tires, balancing and finally I thought it was the big wheels and offset hence I bought the style 5's and new Michelins. I was surprised to see the shake was STILL there with the Style 5's. Now I just figured out it was a hub centric issue all along! I can't wait to get the spacers and the hub centric rings from ECS. I went with expensive H&R's instead of the eBay ones. I can use my original studs with the H&R spacers.

Image

Image

Image
1985 M635
2014 650i Gran Coupe
1991 M5 (Sold)
2011 335d (Sold)
goodm3
Posts: 10
Joined: Tue Sep 10, 2013 2:55 am
Location: Miami, FL

Re: Style 5's sit way too far in wheel well.....

Post by goodm3 »

I put on the H&R 25mm spacers. Looks much better in my opinion.

Image


Image


Image


Image


Image
1985 M635
2014 650i Gran Coupe
1991 M5 (Sold)
2011 335d (Sold)
GazM3
Posts: 1791
Joined: Wed Oct 26, 2011 12:55 pm
Location: Melbourne, Australia

Re: Style 5's sit way too far in wheel well.....

Post by GazM3 »

Hell yeah
BMW’s
84 E24 M635csi
90 E34 M5 3.6
94 E34 540i/6 SC E85
97 E36 M3 euro SC U/C
97 Z3 2.8 widebody

OTHERS
11 Audi S5 3.0 SC
19 VW Amarok V6
baders
Platinum Member
Platinum Member
Posts: 1084
Joined: Sun Nov 23, 2014 7:38 am
Location: Perth Australia

Re: Style 5's sit way too far in wheel well.....

Post by baders »

That does look much better. A few questions if I may ?

What size tyres ?
17x8" rims all round right ?
Suspension standard height ?
25mm spacers front and rear ?
1986 635csi LOCUTUS / Arktis Blau Metallic / Pearl Beige / S38B36/ Close ratio dogleg 5sp
2002 E46 M3 / Topaz Blau Metallic / Black Nappa / 6 speed SMG software tuned / Bilstein PSS10 Coilovers / CMP RACP reinforcement
User avatar
Soperman
Posts: 537
Joined: Tue Nov 25, 2014 2:44 pm
Location: London, UK

Re: Style 5's sit way too far in wheel well.....

Post by Soperman »

Thank you for posting those pics with spacers fitted. I agree with the comments above - that car looks very nice indeed.

Can I also ask, are the rims RC090s???
E24 M635CSi
User avatar
dwcains
Posts: 1465
Joined: Sun Sep 14, 2014 6:01 am
Location: Lutz, FL

Re: Style 5's sit way too far in wheel well.....

Post by dwcains »

goodm3 wrote: Thu Oct 19, 2017 10:14 pm I put on the H&R 25mm spacers. Looks much better in my opinion.

Image
Looks perfect, IMO.
Dean
Lutz, FL

'85 635 CSi Euro #9402254
'87 Spider Veloce
'92 Spider Veloce
'08 350Z

Image
baders
Platinum Member
Platinum Member
Posts: 1084
Joined: Sun Nov 23, 2014 7:38 am
Location: Perth Australia

Re: Style 5's sit way too far in wheel well.....

Post by baders »

Here's my LOCUTUS with RC090s. Looking to possibly fit spacers as goodm3 has done but just sizing it up at the moment.

Image
1986 635csi LOCUTUS / Arktis Blau Metallic / Pearl Beige / S38B36/ Close ratio dogleg 5sp
2002 E46 M3 / Topaz Blau Metallic / Black Nappa / 6 speed SMG software tuned / Bilstein PSS10 Coilovers / CMP RACP reinforcement
User avatar
Brucey
6 Series Guru
6 Series Guru
Posts: 10077
Joined: Fri Apr 09, 2004 7:17 am
Location: Cambridge, UK

Re: Style 5's sit way too far in wheel well.....

Post by Brucey »

baders wrote: Sat Oct 21, 2017 1:42 am Here's my LOCUTUS with RC090s. Looking to possibly fit spacers as goodm3 has done but just sizing it up at the moment.

Image
I reckon you need to look into using a different photo hosting site or something.

cheers
~~~~~~~~~~~~Brucey~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
baders
Platinum Member
Platinum Member
Posts: 1084
Joined: Sun Nov 23, 2014 7:38 am
Location: Perth Australia

Re: Style 5's sit way too far in wheel well.....

Post by baders »

1986 635csi LOCUTUS / Arktis Blau Metallic / Pearl Beige / S38B36/ Close ratio dogleg 5sp
2002 E46 M3 / Topaz Blau Metallic / Black Nappa / 6 speed SMG software tuned / Bilstein PSS10 Coilovers / CMP RACP reinforcement
User avatar
hornhospital
Platinum Member
Platinum Member
Posts: 2921
Joined: Sun Jul 11, 2010 6:46 pm
Location: Silverhill, AL
Contact:

Re: Style 5's sit way too far in wheel well.....

Post by hornhospital »

As I mentioned in that thread, the "Add to Chrome" button is not clickable, so it doesn't work.
Ken Kanne
'84 633CSi "Sylvia"; '85 635CSi "Katja";'85 325e "Hazel Ann"; '95 M3 "Ashlyn"
baders
Platinum Member
Platinum Member
Posts: 1084
Joined: Sun Nov 23, 2014 7:38 am
Location: Perth Australia

Re: Style 5's sit way too far in wheel well.....

Post by baders »

*shrug* works for me and many others.
1986 635csi LOCUTUS / Arktis Blau Metallic / Pearl Beige / S38B36/ Close ratio dogleg 5sp
2002 E46 M3 / Topaz Blau Metallic / Black Nappa / 6 speed SMG software tuned / Bilstein PSS10 Coilovers / CMP RACP reinforcement
User avatar
hornhospital
Platinum Member
Platinum Member
Posts: 2921
Joined: Sun Jul 11, 2010 6:46 pm
Location: Silverhill, AL
Contact:

Re: Style 5's sit way too far in wheel well.....

Post by hornhospital »

OK, here's the weirdness....I tried several times to click the "Add to Chrome" button. It never once "clicked".....but apparently it did install, because I can now see the Photobucket shots above that were previously blanked by the PS ransom note. ](*,)

I don't understand this computer stuff, I just try to use it without looking like a fool. Failed that one. :( :oops:
Ken Kanne
'84 633CSi "Sylvia"; '85 635CSi "Katja";'85 325e "Hazel Ann"; '95 M3 "Ashlyn"
baders
Platinum Member
Platinum Member
Posts: 1084
Joined: Sun Nov 23, 2014 7:38 am
Location: Perth Australia

Re: Style 5's sit way too far in wheel well.....

Post by baders »

Hey no problem Ken glad you got it sorted !

Hoping the OP might come back to answer the questions raised. Sorry for the divergence :oops:

What size tyres ?
17x8" rims all round right ?
Suspension standard height ?
25mm spacers front and rear ?
1986 635csi LOCUTUS / Arktis Blau Metallic / Pearl Beige / S38B36/ Close ratio dogleg 5sp
2002 E46 M3 / Topaz Blau Metallic / Black Nappa / 6 speed SMG software tuned / Bilstein PSS10 Coilovers / CMP RACP reinforcement
Post Reply