Early euro 633csi part out and 635csi drivetrain part out
Moderators: GRNSHRK, ron, bfons
Early euro 633csi part out and 635csi drivetrain part out
Hi everyone,
I have a severely rusted 1977 euro 633csi that I am parting out, drivetrain and running gear are already claimed and will be resurrecting an engineless Bavaria. The car is in pretty rough shape, interior is trashed, rear headrests are present but in very poor condition. Rear bumper/valance is dented, front bumper has a small dent and a couple rust bubbles in the chrome on the center section. Doors are straight and seem rust free, as is the trunk and hood. All glass is intact, some of the side trim is missing. Let know what you're looking for!
I am also parting out the engine/trans from my 85 635csi 5speed as I am swapping in an LS2:
SOLD Engine B34 202k miles runs fine, usual m30 cam wear, good compression - $150 for bare engine
SOLD 5 speed trans g260/6, mileage unknown(the car was originally an auto) shifts well, 2nd gear will grind on high rpm fast shifts -$250
SOLD 5speed swap parts, pedal box, new in box master and slave cylinders, stainless braided hose, driveshaft, trans crossmember(no shifter) - $300
SOLD Complete exhaust system, excellent condition, front pipes and cat are newer- $400
Good alternator, looks fairly new - $75 shipped
Rebuilt 059 ecu with d'silva chip - $150 shipped
SOLD Short shifter, unknown brand, I believe it is the one bavauto sells - $150 shipped
Open to offers, let me know if there is anything not listed you might be looking for. Local pickup is preferred for the large items, please pm me your requests and questions. I am located in Townsend, DE 19734
I have a severely rusted 1977 euro 633csi that I am parting out, drivetrain and running gear are already claimed and will be resurrecting an engineless Bavaria. The car is in pretty rough shape, interior is trashed, rear headrests are present but in very poor condition. Rear bumper/valance is dented, front bumper has a small dent and a couple rust bubbles in the chrome on the center section. Doors are straight and seem rust free, as is the trunk and hood. All glass is intact, some of the side trim is missing. Let know what you're looking for!
I am also parting out the engine/trans from my 85 635csi 5speed as I am swapping in an LS2:
SOLD Engine B34 202k miles runs fine, usual m30 cam wear, good compression - $150 for bare engine
SOLD 5 speed trans g260/6, mileage unknown(the car was originally an auto) shifts well, 2nd gear will grind on high rpm fast shifts -$250
SOLD 5speed swap parts, pedal box, new in box master and slave cylinders, stainless braided hose, driveshaft, trans crossmember(no shifter) - $300
SOLD Complete exhaust system, excellent condition, front pipes and cat are newer- $400
Good alternator, looks fairly new - $75 shipped
Rebuilt 059 ecu with d'silva chip - $150 shipped
SOLD Short shifter, unknown brand, I believe it is the one bavauto sells - $150 shipped
Open to offers, let me know if there is anything not listed you might be looking for. Local pickup is preferred for the large items, please pm me your requests and questions. I am located in Townsend, DE 19734
Last edited by greer on Fri Sep 28, 2018 2:23 pm, edited 1 time in total.
-
- Posts: 797
- Joined: Wed Sep 01, 2010 3:29 pm
- Location: Broomfield, CO
Re: Early euro 633csi part out and 635csi drivetrain part out
PM sent on Exhaust!
- 12 535i
- 92 325ic
- 92 325ic
-
- Platinum Member
- Posts: 3320
- Joined: Thu Sep 28, 2006 9:28 pm
- Location: scottsdale, arizona
- Contact:
Re: Early euro 633csi part out and 635csi drivetrain part out
PM sent
81 Euro 635 M90 with motronic. Currently under a complete nut and bolt restoration. Pictures at
flickr.com/photos/bertsphotos.
flickr.com/photos/bertsphotos.
-
- Posts: 155
- Joined: Tue Mar 16, 2010 7:15 am
- Location: australia
Re: Early euro 633csi part out and 635csi drivetrain part out
hi, do you have speaker pods
regards
richard
regards
richard
-
- Bigcoupe Contributor
- Posts: 323
- Joined: Wed Sep 10, 2014 12:08 am
- Location: Arden, NC 28704
Re: Early euro 633csi part out and 635csi drivetrain part out
Greer, It would be great if you'll do a "My Project" page on the LS2 swap, this has been on my list to do since I've owned the my car. Thanks, Roger
89 635CSiA (11/88 build)
AlpineWeiss II (218)/Natur(0200)
87 L6 635CSI Sold
87 MB 560SL Sold
AlpineWeiss II (218)/Natur(0200)
87 L6 635CSI Sold
87 MB 560SL Sold
Re: Early euro 633csi part out and 635csi drivetrain part out
Richard,
Unfortunately, the speaker pods are severely sun warped and I don't think they would be of any use to anyone.
Re: Early euro 633csi part out and 635csi drivetrain part out
Roger, I've been considering doing that, and probably will when I get the time. Keep an eye out!rhanley 635csi89 wrote: ↑Sat Jul 28, 2018 12:16 pm Greer, It would be great if you'll do a "My Project" page on the LS2 swap, this has been on my list to do since I've owned the my car. Thanks, Roger
Re: Early euro 633csi part out and 635csi drivetrain part out
Hi greer, I’m looking for the abs speed sensor for both left n right front wheels. Please let me know if you have them. Price n shipping to 91011. Thank you.
Kate24
Kate24
Re: Early euro 633csi part out and 635csi drivetrain part out
Kate, sorry no abs sensors available.
Re: Early euro 633csi part out and 635csi drivetrain part out
Hi looking for a set of front kidney grills if any are available. Thank you
Re: Early euro 633csi part out and 635csi drivetrain part out
No decent kidneys available, sorry.
-
- Posts: 6
- Joined: Tue Aug 07, 2018 3:55 pm
- Location: Georgia
Re: Early euro 633csi part out and 635csi drivetrain part out
Hey I’m new here an unable to pm, please email me at [email protected]. Need info on interior and front bumper
Re: Early euro 633csi part out and 635csi drivetrain part out
Hello, I am looking for an M30 flywheel.
Thank you,
Jesse
Thank you,
Jesse
- Hefeweizen
- Posts: 2324
- Joined: Thu Jul 17, 2008 1:24 pm
- Location: Colorado Springs
- Contact:
Re: Early euro 633csi part out and 635csi drivetrain part out
How is the headliner?
Rainer
03 330Xi (DD)
85 635CSi (RIP 3 May 19)
80 633CSi (Red Euro, Project)
"If you think a good European mechanic is expensive, try a bad one!"
03 330Xi (DD)
85 635CSi (RIP 3 May 19)
80 633CSi (Red Euro, Project)
"If you think a good European mechanic is expensive, try a bad one!"
Re: Early euro 633csi part out and 635csi drivetrain part out
The flywheel has been sold, headliner is trashed.
Re: Early euro 633csi part out and 635csi drivetrain part out
Hazard switch available? [email protected]
Re: Early euro 633csi part out and 635csi drivetrain part out
Looking for front bumper rubber trim, front turn signal lenses, sun visors, steering column lower plastic cover, B and C pillar inner covers.
Please contact [email protected]
Thank you
Please contact [email protected]
Thank you
Re: Early euro 633csi part out and 635csi drivetrain part out
Looking for a set of good front bumper ends. The rubber ends that have the orange/yellow reflector. I see the last post before this one is looking for front end parts. If the ends are available I'm still looking. They need to have all the mounting studs in place. Thanks Dave
Past:
84-318i, 85-318i, 85-635 CSi, 86-635 CSi
Current:
87-635 CSi
84-318i, 85-318i, 85-635 CSi, 86-635 CSi
Current:
87-635 CSi
Re: Early euro 633csi part out and 635csi drivetrain part out
Sorry for taking so long to reply, been very busy as usual.
gsalaya I sent you an email
dm635 Sorry, I don't have any bumper ends available
gsalaya I sent you an email
dm635 Sorry, I don't have any bumper ends available
Re: Early euro 633csi part out and 635csi drivetrain part out
Do you have both the driver's and passenger's side exterior door handle assemblies available?
Thanks
Thanks
-
- Platinum Member
- Posts: 3320
- Joined: Thu Sep 28, 2006 9:28 pm
- Location: scottsdale, arizona
- Contact:
Re: Early euro 633csi part out and 635csi drivetrain part out
Rear headrests and clamshells available??>
81 Euro 635 M90 with motronic. Currently under a complete nut and bolt restoration. Pictures at
flickr.com/photos/bertsphotos.
flickr.com/photos/bertsphotos.
-
- Posts: 24
- Joined: Tue Jul 31, 2007 1:56 am
Re: Early euro 633csi part out and 635csi drivetrain part out
I am late to this post. Are parts still available ?
I need the sheetmetal cover that protects the HVAC blower.
Merry Christmas.
I need the sheetmetal cover that protects the HVAC blower.
Merry Christmas.
-
- Posts: 58
- Joined: Mon Jan 19, 2015 9:38 pm
- Location: Houston, TX
Re: Early euro 633csi part out and 635csi drivetrain part out
Hi, I am looking for the radiator and a the carpet, do you have these available and what is the condition?
Thank you!
Julian
Thank you!
Julian
-
- Posts: 58
- Joined: Mon Jan 19, 2015 9:38 pm
- Location: Houston, TX
Re: Early euro 633csi part out and 635csi drivetrain part out
Hi, I am looking for the radiator and a the carpet, do you have these available and what is the condition?
Thank you!
Julian
Thank you!
Julian