acquired a nice PARTS car. NC. 1980 633csi auto. need anything?

Post in this forum for cars and/or parts for sale.

Moderators: GRNSHRK, ron, bfons

User avatar
Jdesign
Posts: 26
Joined: Thu Jan 05, 2017 5:52 pm
Location: Madison, Wisconsin
Contact:

Re: acquired a nice PARTS car. NC. 1980 633csi auto. need anything?

Post by Jdesign »

Sent you an Email!!
Image
BMW E24 633CSI - BMW M30B32
BMW E30 325IC - Toyota 1JZ-GTE
BMW E36 318i - Ford 5.0 FE302
https://www.instagram.com/_jdesigner_/
User avatar
dwcains
Posts: 1465
Joined: Sun Sep 14, 2014 6:01 am
Location: Lutz, FL

Re: acquired a nice PARTS car. NC. 1980 633csi auto. need anything?

Post by dwcains »

Hi Carl:

Just got the side mirror trim triangles - super-quick shipping - Thanks. The better of the two is much better than the worse on on my car, and the worse one (not too bad) is about the same as my better one. So, this worked out very well for my car. Thanks again.
Dean
Lutz, FL

'85 635 CSi Euro #9402254
'87 Spider Veloce
'92 Spider Veloce
'08 350Z

Image
Carlp336
Posts: 362
Joined: Mon Jun 08, 2009 12:55 am
Location: Winston Salem NC

Re: acquired a nice PARTS car. NC. 1980 633csi auto. need anything?

Post by Carlp336 »

added lots of pics.. more to come.
.1977 H&B 630CSI - http://www.sidedraftsix.com.
Carlp336
Posts: 362
Joined: Mon Jun 08, 2009 12:55 am
Location: Winston Salem NC

Re: acquired a nice PARTS car. NC. 1980 633csi auto. need anything?

Post by Carlp336 »

Carlp336 wrote: Mon Jul 31, 2017 2:39 pm added lots of pics.. more to come.
bump
.1977 H&B 630CSI - http://www.sidedraftsix.com.
Carlp336
Posts: 362
Joined: Mon Jun 08, 2009 12:55 am
Location: Winston Salem NC

Re: acquired a nice PARTS car. NC. 1980 633csi auto. need anything?

Post by Carlp336 »

bumping to move more parts.
.1977 H&B 630CSI - http://www.sidedraftsix.com.
User avatar
Hefeweizen
Posts: 2324
Joined: Thu Jul 17, 2008 1:24 pm
Location: Colorado Springs
Contact:

Re: acquired a nice PARTS car. NC. 1980 633csi auto. need anything?

Post by Hefeweizen »

Carl,

what do you have left?

Rainer
Rainer
03 330Xi (DD)
85 635CSi (RIP 3 May 19)
80 633CSi (Red Euro, Project)

"If you think a good European mechanic is expensive, try a bad one!"
Carlp336
Posts: 362
Joined: Mon Jun 08, 2009 12:55 am
Location: Winston Salem NC

Re: acquired a nice PARTS car. NC. 1980 633csi auto. need anything?

Post by Carlp336 »

Hefeweizen wrote: Thu Mar 15, 2018 9:10 pm Carl,

what do you have left?

Rainer
tons..have a list or something in mind ?
.1977 H&B 630CSI - http://www.sidedraftsix.com.
User avatar
Hefeweizen
Posts: 2324
Joined: Thu Jul 17, 2008 1:24 pm
Location: Colorado Springs
Contact:

Re: acquired a nice PARTS car. NC. 1980 633csi auto. need anything?

Post by Hefeweizen »

Right of hand I would need a mirror switch
Rainer
03 330Xi (DD)
85 635CSi (RIP 3 May 19)
80 633CSi (Red Euro, Project)

"If you think a good European mechanic is expensive, try a bad one!"
Carlp336
Posts: 362
Joined: Mon Jun 08, 2009 12:55 am
Location: Winston Salem NC

Re: acquired a nice PARTS car. NC. 1980 633csi auto. need anything?

Post by Carlp336 »

Hefeweizen wrote: Sat Mar 17, 2018 10:48 pm Right of hand I would need a mirror switch
negative.
.1977 H&B 630CSI - http://www.sidedraftsix.com.
Carlp336
Posts: 362
Joined: Mon Jun 08, 2009 12:55 am
Location: Winston Salem NC

Re: acquired a nice PARTS car. NC. 1980 633csi auto. need anything?

Post by Carlp336 »

bumping this, lots in storage and available
.1977 H&B 630CSI - http://www.sidedraftsix.com.
Toddz97
Posts: 8
Joined: Sun Jan 01, 2017 1:11 pm
Location: New York, USA

Re: acquired a nice PARTS car. NC. 1980 633csi auto. need anything?

Post by Toddz97 »

Do you have the A/C compressor, i would be interested if it were in working order.
station105
Posts: 155
Joined: Tue Mar 16, 2010 7:15 am
Location: australia

Re: acquired a nice PARTS car. NC. 1980 633csi auto. need anything?

Post by station105 »

rear speaker pods, condition?
richard
Webblybear
Posts: 70
Joined: Mon Jan 04, 2010 5:08 am
Location: franklin TN

Re: acquired a nice PARTS car. NC. 1980 633csi auto. need anything?

Post by Webblybear »

What size is the water pump pulley?? I’m looking for “the smaller diameter one” as the one on my e32 literally only allows for about 1/8” between the belt and the lower rad hose.
Tazzarti
Posts: 44
Joined: Fri Sep 26, 2014 5:49 pm
Location: Ontario, Canada

Re: acquired a nice PARTS car. NC. 1980 633csi auto. need anything?

Post by Tazzarti »

I Pm'd you , but do you have any of the following:

1. Injectors
2. Fuel level sender
3. Rear passenger seatbelt assembly
4. Glove box latch
5. center console vent cover

Thanks,
Riehldeal
Posts: 5
Joined: Thu Oct 11, 2018 12:05 am
Location: Portland, OR

Re: acquired a nice PARTS car. NC. 1980 633csi auto. need anything?

Post by Riehldeal »

Hi Carl,

Do you have a front drivers side turn signal?

Thanks,
Colby
User avatar
Hefeweizen
Posts: 2324
Joined: Thu Jul 17, 2008 1:24 pm
Location: Colorado Springs
Contact:

Re: acquired a nice PARTS car. NC. 1980 633csi auto. need anything?

Post by Hefeweizen »

Carl, sent you a PM, looking for a good throttle housing
Rainer
03 330Xi (DD)
85 635CSi (RIP 3 May 19)
80 633CSi (Red Euro, Project)

"If you think a good European mechanic is expensive, try a bad one!"
GRNSHRK
Platinum Member
Platinum Member
Posts: 3710
Joined: Thu Apr 08, 2004 3:24 pm
Location: Gilroy (SF Bay Area) CA

Re: acquired a nice PARTS car. NC. 1980 633csi auto. need anything?

Post by GRNSHRK »

Tazzarti, if Carl doesn't have a fuel level sender, I can provide one to you =D>
2. Fuel level sender
Photos below, it was removed from my '80 in the hopes that the replacement would cure my erratic fuel level gauge, when the level got below 1/4 :-?

Alas, it's an issue with the gauge itself ](*,)

So this unit is presumed to still be in functioning order [-o<
Attachments
IMG_3572-sm.jpg
IMG_3572-sm.jpg (41.49 KiB) Viewed 12315 times
IMG_3575-sm.jpg
IMG_3575-sm.jpg (57.34 KiB) Viewed 12315 times
IMG_3574-sm.jpg
IMG_3574-sm.jpg (46.87 KiB) Viewed 12315 times
:mrgreen:
Bobbo
1980 633 CSi Cypress Green/Pearl Beige
2017 X5 M Sport Xdrive 35i Carbon Black/Ivory White
2005 330 Ci ZHP Cabrio Imola Red/Bone/Black
Image
dm635
Posts: 123
Joined: Thu Oct 07, 2004 2:14 pm
Location: louisville,ky

Front bumper ends

Post by dm635 »

Looking for a good set of front bumper ends. The rubber ends that have the orange/yellow reflector. Need to have the mounting studs in place. Thanks Dave
Past:
84-318i, 85-318i, 85-635 CSi, 86-635 CSi

Current:
87-635 CSi
Bosozoku
Posts: 3
Joined: Thu Jan 24, 2019 8:29 pm
Location: Los Angeles

Re: acquired a nice PARTS car. NC. 1980 633csi auto. need anything?

Post by Bosozoku »

Fuel injection system still up for grabs?
Carlp336
Posts: 362
Joined: Mon Jun 08, 2009 12:55 am
Location: Winston Salem NC

Re: acquired a nice PARTS car. NC. 1980 633csi auto. need anything?

Post by Carlp336 »

Bosozoku wrote: Sat Jan 26, 2019 10:54 pm Fuel injection system still up for grabs?
negative, sold motor complete.
.1977 H&B 630CSI - http://www.sidedraftsix.com.
Bosozoku
Posts: 3
Joined: Thu Jan 24, 2019 8:29 pm
Location: Los Angeles

Re: acquired a nice PARTS car. NC. 1980 633csi auto. need anything?

Post by Bosozoku »

Happen to have a sideloader LSD?
Carlp336
Posts: 362
Joined: Mon Jun 08, 2009 12:55 am
Location: Winston Salem NC

Re: acquired a nice PARTS car. NC. 1980 633csi auto. need anything?

Post by Carlp336 »

its open
.1977 H&B 630CSI - http://www.sidedraftsix.com.
User avatar
SORIANOTRON
Posts: 71
Joined: Tue Oct 31, 2017 7:58 pm
Location: Honolulu

Re: acquired a nice PARTS car. NC. 1980 633csi auto. need anything?

Post by SORIANOTRON »

Do you still have the front, drivers side fender?
Carlp336
Posts: 362
Joined: Mon Jun 08, 2009 12:55 am
Location: Winston Salem NC

Re: acquired a nice PARTS car. NC. 1980 633csi auto. need anything?

Post by Carlp336 »

SORIANOTRON wrote: Fri Feb 15, 2019 5:59 pm Do you still have the front, drivers side fender?
please read post #1
.1977 H&B 630CSI - http://www.sidedraftsix.com.
User avatar
SORIANOTRON
Posts: 71
Joined: Tue Oct 31, 2017 7:58 pm
Location: Honolulu

Re: acquired a nice PARTS car. NC. 1980 633csi auto. need anything?

Post by SORIANOTRON »

Ahhh shucks! Thanks!
Post Reply