NO CLUTCH
Moderators: GRNSHRK, ron, bfons
-
- Posts: 2072
- Joined: Wed May 23, 2007 11:31 pm
- Location: Baltimore .Md HON
NO CLUTCH
Check it out. I am Driving up the rd to get my Birthday Lunch . Then NOTHING I have RPMs but no Power with out any Warning at all . The Clutch is still tight to push in and Fluid is at the Proper level. Could this be a Slave or Master Cylinder Problem,or do I need a Clutch???? Cant I test the Slave and Master Cyl some how?
1981 635 German FRANKEN6ER gray market RIG, 1988 635,91 Nissan 240SX , 1993 Harley 1340ccFXR Super Glide, 2000 M2 Buell 1200cc.
Re: NO CLUTCH
On e24 based cars, is it possible your clutch pedal bracket failed?
http://www.Drive4Corners.com
'79 635CSi Revival
'80 635CSi
'83 633CSi Callaway Turbo continued as 1988 535is Turbo
SOLD: '81 635CSi/A
'79 635CSi Revival
'80 635CSi
'83 633CSi Callaway Turbo continued as 1988 535is Turbo
SOLD: '81 635CSi/A
-
- Posts: 2072
- Joined: Wed May 23, 2007 11:31 pm
- Location: Baltimore .Md HON
Re: NO CLUTCH
Do you mean the Pivot that the Pedal mounts to?
1981 635 German FRANKEN6ER gray market RIG, 1988 635,91 Nissan 240SX , 1993 Harley 1340ccFXR Super Glide, 2000 M2 Buell 1200cc.
Re: NO CLUTCH
do you mean the engine is no longer connected to the wheels? Or do you mean that you can't disconnect the engine from the wheels, using the clutch ?
cheers
cheers
~~~~~~~~~~~~Brucey~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
- Posts: 2072
- Joined: Wed May 23, 2007 11:31 pm
- Location: Baltimore .Md HON
Re: NO CLUTCH
The Motor will not turn the WHeels. I can put it in ever Gear ,but the car will not Move. I hope this is just a Master Cyl or Slave Syl. I do not want to Clime under it and replace the Clutch. My 6er only has 98K on on it.
1981 635 German FRANKEN6ER gray market RIG, 1988 635,91 Nissan 240SX , 1993 Harley 1340ccFXR Super Glide, 2000 M2 Buell 1200cc.
Re: NO CLUTCH
the clutch is engaged by a gurt great spring. All the hydraulics ever do is fight the spring and temporarily disconnect the engine from the drive. If the drive is never connected something major is broken, jammed or just worn out; it is extremely unlikely to be the external hydraulic parts that are at fault.
Check that the fault isn't somewhere else in the driveline (ie after the gearbox) before you drop the gearbox out.
cheers
Check that the fault isn't somewhere else in the driveline (ie after the gearbox) before you drop the gearbox out.
cheers
~~~~~~~~~~~~Brucey~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- randall977
- Posts: 264
- Joined: Sun Jan 21, 2018 9:52 am
- Location: Oxford, UK
- Contact:
Re: NO CLUTCH
Sounds like either the clutch is jammed open or the selector in the gearbox has gone - second is more likely. Take out the master cylinder (on the bell housing) and see if it's working...
Re: NO CLUTCH
I'd start by examining everything for leaks and such and pulling out the clutch slave to see if the rod is still in place.
Is it possible that the clutch pivot fork had the retaining spring come off so the pivot fork isn't actually pivoting properly??
Is it possible that the clutch pivot fork had the retaining spring come off so the pivot fork isn't actually pivoting properly??
http://www.Drive4Corners.com
'79 635CSi Revival
'80 635CSi
'83 633CSi Callaway Turbo continued as 1988 535is Turbo
SOLD: '81 635CSi/A
'79 635CSi Revival
'80 635CSi
'83 633CSi Callaway Turbo continued as 1988 535is Turbo
SOLD: '81 635CSi/A
-
- Posts: 2072
- Joined: Wed May 23, 2007 11:31 pm
- Location: Baltimore .Md HON
Re: NO CLUTCH
I will check the Slave Cyl soon .The weather is getting better to start checking stuff to see whats up with my 6er. I started it up yesterday and put it in Gear ,I could hear the Clutch Spinning when I would put it in Gear and let the Clutch out. It sounded like it was Scraping or barley touching the Flywheel. The car would move about an 1/2 inch then roll back. I did not see any Leaks .I will check it more later. I hope its the Slave Cyl, I do not want to install a new Clutch ,Press Plate and Throwout Bearing.
1981 635 German FRANKEN6ER gray market RIG, 1988 635,91 Nissan 240SX , 1993 Harley 1340ccFXR Super Glide, 2000 M2 Buell 1200cc.
-
- Posts: 2072
- Joined: Wed May 23, 2007 11:31 pm
- Location: Baltimore .Md HON
Re: NO CLUTCH
I finally Climbed under my 6er today and pulled the Slave Cly off. It is very tight and it has pressure to rush the rod out on its own .I might reinstall it and Bleed it and see if that helps. I really DO NOT want to put a new Clutch in now.
1981 635 German FRANKEN6ER gray market RIG, 1988 635,91 Nissan 240SX , 1993 Harley 1340ccFXR Super Glide, 2000 M2 Buell 1200cc.
-
- Posts: 2072
- Joined: Wed May 23, 2007 11:31 pm
- Location: Baltimore .Md HON
Re: NO CLUTCH
This is Crazy about an Hr after my last Post I went back out to Bleed the SC. I added some Fluid,now I can not move the Rod that moves in and out of the SC at all. WHAT DUH!!!!!
1981 635 German FRANKEN6ER gray market RIG, 1988 635,91 Nissan 240SX , 1993 Harley 1340ccFXR Super Glide, 2000 M2 Buell 1200cc.
- hornhospital
- Platinum Member
- Posts: 2931
- Joined: Sun Jul 11, 2010 6:46 pm
- Location: Silverhill, AL
- Contact:
Re: NO CLUTCH
Crack the bleed screw, leave it open, and try to push the rod IN. If it won't move, the piston has pushed out of the bore, and the accordion sleeve is all that's holding the rod in place.
Ken Kanne
'84 633CSi "Sylvia"; '85 635CSi "Katja";'85 325e "Hazel Ann"; '95 M3 "Ashlyn"
'84 633CSi "Sylvia"; '85 635CSi "Katja";'85 325e "Hazel Ann"; '95 M3 "Ashlyn"
-
- Posts: 2072
- Joined: Wed May 23, 2007 11:31 pm
- Location: Baltimore .Md HON
Re: NO CLUTCH
I have trie it with the Bleeder open and it would not push in.I have one on my 86 e24 Parts car ,I will try it.
Last edited by BUELLRIDER on Fri Jun 15, 2018 9:53 pm, edited 1 time in total.
1981 635 German FRANKEN6ER gray market RIG, 1988 635,91 Nissan 240SX , 1993 Harley 1340ccFXR Super Glide, 2000 M2 Buell 1200cc.
-
- Posts: 2072
- Joined: Wed May 23, 2007 11:31 pm
- Location: Baltimore .Md HON
Re: NO CLUTCH
It Turns out that my Axle Bolts came out for some weird reason.
1981 635 German FRANKEN6ER gray market RIG, 1988 635,91 Nissan 240SX , 1993 Harley 1340ccFXR Super Glide, 2000 M2 Buell 1200cc.
Re: NO CLUTCH
BUELLRIDER wrote: ↑Wed Oct 03, 2018 6:05 pm It Turns out that my Axle Bolts came out for some weird reason.
I did think that was possible..... hope you didn't get too far trying to solve it some other way....
cheers
~~~~~~~~~~~~Brucey~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
- Posts: 2072
- Joined: Wed May 23, 2007 11:31 pm
- Location: Baltimore .Md HON
Re: NO CLUTCH
BRUCEY, I got under the 6er with my wife slightly reving the motor and saw the passenger side axle moving . Thank GOD I saw that or I would have replaced the Clutch.
1981 635 German FRANKEN6ER gray market RIG, 1988 635,91 Nissan 240SX , 1993 Harley 1340ccFXR Super Glide, 2000 M2 Buell 1200cc.