Front bumper ends
Moderators: GRNSHRK, ron, bfons
Front bumper ends
I'm posting everywhere for these. These are exterior so a good spot to try. What I'm looking for is a good set of front bumper ends for an '87 and back. The ends have the orange/yellow reflector. Need to have all the mounting studs in place. That's the problem with mine. The studs are no more, missing in action. Thanks Dave
Past:
84-318i, 85-318i, 85-635 CSi, 86-635 CSi
Current:
87-635 CSi
84-318i, 85-318i, 85-635 CSi, 86-635 CSi
Current:
87-635 CSi
Re: Front bumper ends
It depends on which ends you need. If you are talking about #10 on the images below ECS and a few others have them available new.
https://drive.google.com/open?id=1EtRf4 ... Km4abzc-lc
https://www.ecstuning.com/b-genuine-bmw ... 111869769/
I suggest going on RealOEM.com and looking up the exact part number you need.
https://drive.google.com/open?id=1EtRf4 ... Km4abzc-lc
https://www.ecstuning.com/b-genuine-bmw ... 111869769/
I suggest going on RealOEM.com and looking up the exact part number you need.
BMW E24 633CSI - BMW M30B32
BMW E30 325IC - Toyota 1JZ-GTE
BMW E36 318i - Ford 5.0 FE302
https://www.instagram.com/_jdesigner_/
-
- Posts: 64
- Joined: Sat May 03, 2014 5:31 am
- Location: Danville, CA
Re: Front bumper ends
I purchased the right front covering (#51-11-1-869-770) from the dealer in October 2016. My net price was $231.70 (List $279.16). This part now appears to be discontinued.
However, the left front covering (#51-11-1-869-769) is still available from "RealOEM.com". Cost is $321.51 per the below link:
http://www.realoem.com/bmw/enUS/showpar ... 1111869770
Good luck,
Don
However, the left front covering (#51-11-1-869-769) is still available from "RealOEM.com". Cost is $321.51 per the below link:
http://www.realoem.com/bmw/enUS/showpar ... 1111869770
Good luck,
Don
1985 635CSi 5MT Delphin Grey/Pearl Beige
Does a guilt free shark have a feeling of remoras?
Does a guilt free shark have a feeling of remoras?
Re: Front bumper ends
I ran into an old buddy at the last SESF who had a new one. Said it was the last one in stock. He paid and wanted $250. I just can't pay that much when there's got to be some good used ones out there. My 6 is no show car and $500 to dress up the front end on both ends is unlikely to happen. Used ones with all the mounting studs will have to do for now. Thanks for the info though.
Past:
84-318i, 85-318i, 85-635 CSi, 86-635 CSi
Current:
87-635 CSi
84-318i, 85-318i, 85-635 CSi, 86-635 CSi
Current:
87-635 CSi