Euro E12 parts for sale
Moderators: GRNSHRK, ron, bfons
-
- Posts: 75
- Joined: Sun Jun 26, 2016 7:10 pm
- Location: Columbus, OH
Euro E12 parts for sale
Hi,
I've begun parting out the '79 635CSi. Have several parts off the car and for sale. Car itself still has the M90 motor in it. I'd like to sell the engine with the car just for transportation purposes. Tow it home or have it picked up and then sell to shell or god forbid call the scrap yard and recoup $250. I have a title. Chrome bottle caps should sell as well. They've got metric tires on them.
M90 motor with ECU and 127K including rolling chassis with title - $1700
Trunk lid with foam spoiler and 635CSi badge...$150. Foam spoiler is glued on pretty good. I'm not messing with it.
Front bumper is rough but but good center frame and ends. Valence is cut. chrome is missing as well as all rubber...$75
Rear bumper pretty good with exception of rubber strip that has been screwed on. Chrome ok and good rubber ends. Valence also good...$100
Taillight chrome bezels ok but each have little blister and chrome splitting on bottom. Nothing hateful. $45 ea.
Passenger side lens ok but has a crack that's been glued. hardly noticeable...$20
Front fenders (E12 not E24) good, with very little rust on bottom back edge. $75 ea.
Hood in very good condition $150
Doors in good condition. Small spot of rust in lower front corner on driver door. (I'll take pictures soon. Can't get to passenger side...sitting too close to building. $100
Picture Album here....https://imgur.com/a/BPLBTVv
Thanks,
Mark
Columbus, OH
I've begun parting out the '79 635CSi. Have several parts off the car and for sale. Car itself still has the M90 motor in it. I'd like to sell the engine with the car just for transportation purposes. Tow it home or have it picked up and then sell to shell or god forbid call the scrap yard and recoup $250. I have a title. Chrome bottle caps should sell as well. They've got metric tires on them.
M90 motor with ECU and 127K including rolling chassis with title - $1700
Trunk lid with foam spoiler and 635CSi badge...$150. Foam spoiler is glued on pretty good. I'm not messing with it.
Front bumper is rough but but good center frame and ends. Valence is cut. chrome is missing as well as all rubber...$75
Rear bumper pretty good with exception of rubber strip that has been screwed on. Chrome ok and good rubber ends. Valence also good...$100
Taillight chrome bezels ok but each have little blister and chrome splitting on bottom. Nothing hateful. $45 ea.
Passenger side lens ok but has a crack that's been glued. hardly noticeable...$20
Front fenders (E12 not E24) good, with very little rust on bottom back edge. $75 ea.
Hood in very good condition $150
Doors in good condition. Small spot of rust in lower front corner on driver door. (I'll take pictures soon. Can't get to passenger side...sitting too close to building. $100
Picture Album here....https://imgur.com/a/BPLBTVv
Thanks,
Mark
Columbus, OH
- Attachments
-
- 0110191407b.jpg (132.29 KiB) Viewed 14761 times
-
- 0110191406a.jpg (111.99 KiB) Viewed 14761 times
-
- 0110191407d.jpg (107.63 KiB) Viewed 14761 times
-
- 0110191407.jpg (157.05 KiB) Viewed 14761 times
Re: Euro E12 parts for sale
are the chrome rear tail light bezels still for sale, if so keep them for me, when you reply and still available would you package them up to send to australia
regards
richard
regards
richard
-
- Posts: 75
- Joined: Sun Jun 26, 2016 7:10 pm
- Location: Columbus, OH
Re: Euro E12 parts for sale
Hi. Yes, I'll ship anywhere. I'll box them up and get a shipping quote from post office. Is it just the chrome bezels you want or the bulb unit as well? Would probably save you a few bucks if I just shipped the bezels. Your call.
Mark
Mark
-
- Posts: 75
- Joined: Sun Jun 26, 2016 7:10 pm
- Location: Columbus, OH
Re: Euro E12 parts for sale
Sold some parts today.
Decklid with spoiler...gone
front bumper...gone
rear bumper...gone
taillight bezels are spoken for
Front fenders, doors and hood still avail. So is M90 engine with or without car.
Thanks,
Mark
Decklid with spoiler...gone
front bumper...gone
rear bumper...gone
taillight bezels are spoken for
Front fenders, doors and hood still avail. So is M90 engine with or without car.
Thanks,
Mark
Re: Euro E12 parts for sale
hi mark, just the chrome bezels if its not to much trouble, i will wait for your shipping quote, just one thing to check, mine is a 1982 635 csi euro, and e24, i'm sure the rear tail lights are the same for a e12 based car, can you confirm
regards
richard
regards
richard
Re: Euro E12 parts for sale
hi mark,
forgot to give you my address for the bezels if they are okay for e24
RICHARD OSCIAK
7 SANCTUARY BOULEVARD
WODONGA VICTORIA 3690
AUSTRALIA
forgot to give you my address for the bezels if they are okay for e24
RICHARD OSCIAK
7 SANCTUARY BOULEVARD
WODONGA VICTORIA 3690
AUSTRALIA
-
- Posts: 75
- Joined: Sun Jun 26, 2016 7:10 pm
- Location: Columbus, OH
Re: Euro E12 parts for sale
These will work on your car. I will take some detailed pictures of them in the morning to make sure you're ok with their condition. Then I'll quote you the shipping cost.
Mark
Mark
-
- Posts: 797
- Joined: Wed Sep 01, 2010 3:29 pm
- Location: Broomfield, CO
-
- Posts: 75
- Joined: Sun Jun 26, 2016 7:10 pm
- Location: Columbus, OH
Re: Euro E12 parts for sale
Here are some better pix of the taillight bezels. You can clearly that on each bezel there's one imperfection with chrome starting to blister a bit. Shipping to Australia will run $67.10. That's the cheapest route.
thanks and let me know...
Mark
thanks and let me know...
Mark
- Attachments
-
- 0112191335b.jpg (815.94 KiB) Viewed 14675 times
-
- 0112191335a.jpg (705.7 KiB) Viewed 14675 times
-
- 0112191335.jpg (698.97 KiB) Viewed 14675 times
-
- 0112191334.jpg (733.21 KiB) Viewed 14675 times
-
- Posts: 75
- Joined: Sun Jun 26, 2016 7:10 pm
- Location: Columbus, OH
Re: Euro E12 parts for sale
Sorry, I do not. Just a headliner that's in so-so condition.
Thanks,
Mark
Thanks,
Mark
- Attachments
-
- 0112191448.jpg (755.78 KiB) Viewed 14673 times
-
- Posts: 75
- Joined: Sun Jun 26, 2016 7:10 pm
- Location: Columbus, OH
Re: Euro E12 parts for sale
Still have this chassis with M90 engine installed. I'm selling the complete exhaust system from down-pipes back to muffler. Previous owner had cut it into 3 sections. This will make it easy to ship I suppose. $280. Center resonator and rear muffler are in great shape. Some evidence of welding has been done to down-pipe sections.
Also selling the Euro gas tank. It's in real nice shape. Inside looks very nice. $180
Still have front fenders, doors, pedal cluster and brakes.
Thanks,
Mark
Also selling the Euro gas tank. It's in real nice shape. Inside looks very nice. $180
Still have front fenders, doors, pedal cluster and brakes.
Thanks,
Mark
- Attachments
-
- 0128191010a.jpg (1.18 MiB) Viewed 14452 times
-
- 0128191329a.jpg (1.37 MiB) Viewed 14452 times
Re: Euro E12 parts for sale
By any chance is the left, driver side quarter panel molding still on the vehicle? All I am missing is the little plastic end piece toward the driver's door. I don't care what the rest of the molding looks like.
Please let me know.
Klaus
Please let me know.
Klaus
-
- Posts: 75
- Joined: Sun Jun 26, 2016 7:10 pm
- Location: Columbus, OH
Re: Euro E12 parts for sale
Update on what's left on the '79 Euro 635CSi. Pulled the engine today.
M90 Motor on blocks in the garage. Comes with harness and computer. 128K mls. Compression test results are 155, 150, 150, 160, 155, 125.
$1200
Driver and passenger side early E12 fenders. Pix tell the story. Both good shape but have some rust along bottom edge.
$100 each
Euro gas tank in great shape. No rust inside and no seam rust.
$180
Oil Cooler
$75
Hood in good shape. No visible damage.
$100
Exhaust system that's been butchered together. Euro spec collector pipes and center pieces but US resonator and muffler welding in.
$100
Lots of pix here....
https://imgur.com/gallery/eblE0JZ
Thanks,
Mark
M90 Motor on blocks in the garage. Comes with harness and computer. 128K mls. Compression test results are 155, 150, 150, 160, 155, 125.
$1200
Driver and passenger side early E12 fenders. Pix tell the story. Both good shape but have some rust along bottom edge.
$100 each
Euro gas tank in great shape. No rust inside and no seam rust.
$180
Oil Cooler
$75
Hood in good shape. No visible damage.
$100
Exhaust system that's been butchered together. Euro spec collector pipes and center pieces but US resonator and muffler welding in.
$100
Lots of pix here....
https://imgur.com/gallery/eblE0JZ
Thanks,
Mark
Re: Euro E12 parts for sale
Do you happen to have the drivers door left? Looking for a handle/door carrier assembly and possibly a window motor/regulator if you have one.
Current Bavarians-
'82 635CSi Euro- Hennarot/Tan Recaro, CR Dogleg
'75 2002- Taiga/Tan
'19 i3 REX
Previous sharks-
'81 635CSi Euro- Hennarot/Black Recaro, CR Dogleg
'86 635CSi- Arktisblau/Tan Recaro interior, 5 speed
'82 635CSi Euro- Hennarot/Tan Recaro, CR Dogleg
'75 2002- Taiga/Tan
'19 i3 REX
Previous sharks-
'81 635CSi Euro- Hennarot/Black Recaro, CR Dogleg
'86 635CSi- Arktisblau/Tan Recaro interior, 5 speed
-
- Posts: 75
- Joined: Sun Jun 26, 2016 7:10 pm
- Location: Columbus, OH
Re: Euro E12 parts for sale
Sorry, no doors left. Only the hood, both fenders and the M90 engine.
Thanks,
Mark
Thanks,
Mark
-
- Posts: 14
- Joined: Wed Mar 22, 2017 6:45 pm
- Location: Winchester, MA
Re: Euro E12 parts for sale
Hi do you still have the oil cooler and lines?
thanks
thanks
Re: Euro E12 parts for sale
Hi Mark,I have a 9/84 euro e24 white I *think* uses the same fuel tank as yours. If so, I'd like to make a deal - I'm in Indiana.Sechserreihe wrote: ↑Mon Jan 28, 2019 11:41 pm
Also selling the Euro gas tank. It's in real nice shape. Inside looks very nice. $180
Thanks,
Mark
Thanks
Chris
-
- Posts: 75
- Joined: Sun Jun 26, 2016 7:10 pm
- Location: Columbus, OH
Re: Euro E12 parts for sale
Sorry, I sold that tank.
MP
MP
-
- Posts: 1
- Joined: Tue Sep 24, 2019 12:57 am
- Location: CA
Re: Euro E12 parts for sale
Please PM me if M90 engine is still for sale.
Thanks
Michael
Thanks
Michael
-
- Posts: 45
- Joined: Tue Jul 07, 2015 12:45 am
- Location: Puerto Rico
- Contact:
Re: Euro E12 parts for sale
How much do you want for the headliner?
2000 BMW Z3
1991 BMW 318is
1987 BMW M6
1980 320i
1991 BMW 318is
1987 BMW M6
1980 320i