Hi all,
So I am recently a new owner of a 635csi
However there is an issue! Both front seats are rocking. It's not the seat loose to the chassis but the frame inside the seat by all accounts as it tilts when I unlatch them forward for access to the rear seats.
All the electrics work on the passenger side but not on the drive side (or the memory).
Any ideas, support or who you would recommend that can look at this for me would be amazing!
Memory seats not working and loose
Moderators: GRNSHRK, ron, bfons
Re: Memory seats not working and loose
A more detailed location would help to find someone local to you.
They are ALWAYS rustier than you thought!!!!!!
'85 M #228
'87 M #367
'88 High line.
'10 X5
‘84 Alfasud 1.5 ti
'85 M #228
'87 M #367
'88 High line.
'10 X5
‘84 Alfasud 1.5 ti
-
- Posts: 68
- Joined: Wed Feb 13, 2019 4:22 am
- Location: Melbourne, Australia
Re: Memory seats not working and loose
Not sure on the loss of memory functions but when I bought my 635 I too had rocking seats. Turned out the screw that held the back in place had fallen out of both drivers and passenger side. Just remove the plastic covers on both sides of each seat and make sure everything is in place and tight.
Loose or missing screws seem to afflict a few functions in these cars.
Loose or missing screws seem to afflict a few functions in these cars.
Past toys:
1979 Volvo282GT
1988 Porsche 944S
Current toy:
1986 635 CSi
1979 Volvo282GT
1988 Porsche 944S
Current toy:
1986 635 CSi
Re: Memory seats not working and loose
Hi Ron
Im basedin Birmingham. Going to to take the seat back of to check the fixings are present and secure but having a back up interior seat specialist may be handy should i need it.
Im basedin Birmingham. Going to to take the seat back of to check the fixings are present and secure but having a back up interior seat specialist may be handy should i need it.
Re: Memory seats not working and loose
Thanks @bigboystoy - I'll give that a shot!
- 635sharknose
- Posts: 513
- Joined: Fri Sep 13, 2019 4:58 pm
- Location: The Netherlands
- Contact:
Re: Memory seats not working and loose
Hi, I had the exact same thing, electric seat did not work anymore, memory didn't work as well.
Took out the seat and found the connector of the control PCB to be loose.
Plugged it in and worked fully again.
Took out the seat and found the connector of the control PCB to be loose.
Plugged it in and worked fully again.
Paul
Instagram: @635sharknose
1987 635CSi Bronzitbeige
Instagram: @635sharknose
1987 635CSi Bronzitbeige