Evening all,
I probably know the answer before asking the question but here goes. Does anyone know if you can get such a thing as rear wheel arch repair panel. Just considering the options whether to repair or replace.
Aftermarket body panels
Moderators: GRNSHRK, ron, bfons
Re: Aftermarket body panels
Alpina B9 coupe (Alpinweiss)
Alpina B9 sedan (Alpinweiss)
Alpina B6 clone in process (Alpinweiss)
Mini S (had to go: it was Electric Blue)
Rover Disco 1 (Alpine White)
Alpina B9 sedan (Alpinweiss)
Alpina B6 clone in process (Alpinweiss)
Mini S (had to go: it was Electric Blue)
Rover Disco 1 (Alpine White)
Re: Aftermarket body panels
I used these . Swage lines all aligned with original ,quality was very good too.
He has both sides .
I have no affiliation with the seller .
http://www.ebay.de/itm/BMW-E24-635csi-M ... 2eecd47a79
He has both sides .
I have no affiliation with the seller .
http://www.ebay.de/itm/BMW-E24-635csi-M ... 2eecd47a79
1981 635 series 1
Re: Aftermarket body panels
Thanks very much for the links. I thought I would be asking the impossible. No doubt I shall have to ask more questions in future. Thanks again.
Kev
Kev
Re: Aftermarket body panels
I bought a nearside arch panel from these guys, not fitted yet however the quality looks good and price is very reasonable.Alpinacsi wrote:https://www.wallothnesch.com/karosserie ... i-e24.html
They have outer wheel arches available
'85 M635 #160
Re: Aftermarket body panels
Hi Ben, et. al,BenM635i wrote: ↑Sun Mar 20, 2016 10:04 amI bought a nearside arch panel from these guys, not fitted yet however the quality looks good and price is very reasonable.Alpinacsi wrote:https://www.wallothnesch.com/karosserie ... i-e24.html
They have outer wheel arches available
Have you fitted your W&T panels since then? What are your experiences?
I am asking because i am also about to purchase a rear panel set from these guys.
Thanks!
/Peter
'80 635csi m90 5-speed dogleg
- 86_6series
- Platinum Member
- Posts: 1069
- Joined: Mon Apr 02, 2007 10:08 pm
- Location: West Nyack, NY
Re: Aftermarket body panels
The post is nearly 4 years old.
I would PM Ben, he may not be current on the site.
I would PM Ben, he may not be current on the site.
86-635CSi
96-MB C220 SOLD
98-740i
71-Continental MK3
96-MB C220 SOLD
98-740i
71-Continental MK3
-
- Platinum Member
- Posts: 4492
- Joined: Tue Mar 16, 2010 8:32 pm
- Location: usually in the barn, Kent, England.
Re: Aftermarket body panels
There has been discussion on this board, in the past, as to the quality of these repair sections. Some say that the quality of the stampings is not so good and the dies are worn out. The fact of the matter is that unless you can find some really old sections, there is no alternative.86_6series wrote: ↑Thu Jan 02, 2020 9:08 pm The post is nearly 4 years old.
I would PM Ben, he may not be current on the site.