E24 Shifter Rebuild Questions

Post in this forum for topics relating to suspension, steering, and brakes

Moderators: GRNSHRK, ron, bfons

Post Reply
bimmern00b
Posts: 8
Joined: Wed Apr 08, 2020 4:46 am
Location: California

E24 Shifter Rebuild Questions

Post by bimmern00b »

Hello All!

Hopefully im posting this in the right place. I have a 1983 BMW 633 CSI. Im about to replace my selector rod shaft seal as it is leaking. While im down there I figure I might as well install a Z3 1.9 Short shifter that ive already bought and all the bushing and washers as well.

HOWEVER, if though there is a ton of information on the net through BigCoup, REALOEM, and BMWFANS, I cant seem to get a straight answer on exactly what parts to change out to reduce sloppy shifting and get everything nice and crisp.

Ive watched "Slownrusty" youtube video a couple times, and using that and the info from REALOEM, ive been able to figure out couple of parts that I need.

For example

https://www.realoem.com/bmw/enUS/showpa ... Id=25_0071

I know I need
Number 6
Number 11
Number 14

However, where do I get the bushing for number 8? - Do I need to just buy the entire shifter arm?
Number 2 bushing - That doesn't even look like it exists anymore! I cant find it anywhere and the two Part numbers pull up on different model BMWs!


So I used this link here and ive clicked all links in there as well..

http://bigcoupe.com/phpBB2/viewtopic.php?t=23048

In that link there is a diagram that has numbers 2,3,6,11,13,14,15,16,17,18 and 19 highlighted in yellow, is this complete? Is that all I need to rebuild my shifter?

Sorry if im ranting, im not exactly the most mechanically inclined person, but id like to try this myself. Or even if I do take it to a shop, id like to be able to tell them exactly what I want replaced.

Lastly, UUC sells a double -shear selector rod - I understand the benefit, but just based on other people experience, is it worth the money spent? or should I just use the original selector rod?

Thanks for all the help, much appreciated!
bimmern00b
Posts: 8
Joined: Wed Apr 08, 2020 4:46 am
Location: California

Re: E24 Shifter Rebuild Questions

Post by bimmern00b »

so after some more research,

looks like this is the diagram I should be using because my e24 is a 1983 built in 9/1982. still unsure what parts to source..

https://www.realoem.com/bmw/enUS/partgr ... 3CSi&mg=25
bimmern00b
Posts: 8
Joined: Wed Apr 08, 2020 4:46 am
Location: California

Re: E24 Shifter Rebuild Questions

Post by bimmern00b »

one more thing , sorry. should I replace as much as possible from all 3 diagrams?

https://www.realoem.com/bmw/enUS/showpa ... Id=25_0145

https://www.realoem.com/bmw/enUS/showpa ... Id=25_0150

https://www.realoem.com/bmw/enUS/showpa ... Id=25_0197


or will replacing everything from the second diagram (below) be enough?

https://www.realoem.com/bmw/enUS/showpa ... Id=25_0150
User avatar
635sharknose
Posts: 513
Joined: Fri Sep 13, 2019 4:58 pm
Location: The Netherlands
Contact:

Re: E24 Shifter Rebuild Questions

Post by 635sharknose »

Make sure you are looking at the right drawings. The date says "from 09/1985" but you have found that yourself as well I see.
You best enter your VIN in the BMW parts website (currently offline for maintenance).
https://shop.bmw-classic.de/waroot/cl_m ... index.html

Why not take it out, see what is worn and replace only the worn parts? The complete kit will cost you a lot.
The list with yellow and orange colours is complete, but not for your car.
Paul
Image
Instagram: @635sharknose
1987 635CSi Bronzitbeige
User avatar
86_6series
Platinum Member
Platinum Member
Posts: 1069
Joined: Mon Apr 02, 2007 10:08 pm
Location: West Nyack, NY

Re: E24 Shifter Rebuild Questions

Post by 86_6series »

I had both short shift and DSSR installed. All I can say is friggin' great.

Yeah it's expensive, but it's the cats meow.

To me part of the fun is very crisp shifts, even in a modestly horse powered car.

The DSSR part # is the mm size. Make sure you measure the pin distance
I remember it was listed wrong and had to order a different size. I don't
remember what it was. If you're thinking of keeping the car for a long time
do it, you won't be sorry.

Bob V
86-635CSi
96-MB C220 SOLD
98-740i
71-Continental MK3
bimmern00b
Posts: 8
Joined: Wed Apr 08, 2020 4:46 am
Location: California

Re: E24 Shifter Rebuild Questions

Post by bimmern00b »

635sharknose wrote: Wed Apr 08, 2020 9:49 am Make sure you are looking at the right drawings. The date says "from 09/1985" but you have found that yourself as well I see.
You best enter your VIN in the BMW parts website (currently offline for maintenance).
https://shop.bmw-classic.de/waroot/cl_m ... index.html

Why not take it out, see what is worn and replace only the worn parts? The complete kit will cost you a lot.
The list with yellow and orange colours is complete, but not for your car.

Haha, that’s probably the best route to go, I’m just a bit impatient and wanted to source all the parts, drop everything and get going! I’ll try the link!
User avatar
Slownrusty
Posts: 617
Joined: Wed Apr 24, 2019 2:22 pm
Location: Houston, TX

Re: E24 Shifter Rebuild Questions

Post by Slownrusty »

Slownrusty here...how can I assist?
Post Reply