I am converting to ellipsoid headlights.
Now I noticed that the headlight hits a piece of metal frame.
Does anyone know how this is constructed in the later types (1988/1989) E24? There must be more space.
Conversion to ellipsoid headlights
Moderators: GRNSHRK, ron, bfons
- 635sharknose
- Posts: 513
- Joined: Fri Sep 13, 2019 4:58 pm
- Location: The Netherlands
- Contact:
Conversion to ellipsoid headlights
- Attachments
-
- 20210124_120525.jpg (293 KiB) Viewed 2510 times
-
- 20210124_120505.jpg (271.15 KiB) Viewed 2510 times
Paul
Instagram: @635sharknose
1987 635CSi Bronzitbeige
Instagram: @635sharknose
1987 635CSi Bronzitbeige
Re: Conversion to ellipsoid headlights
Just cut the metal back to clear the light. Treat the cut edge. There is plenty of metal left.
They are ALWAYS rustier than you thought!!!!!!
'85 M #228
'87 M #367
'88 High line.
'10 X5
‘84 Alfasud 1.5 ti
'85 M #228
'87 M #367
'88 High line.
'10 X5
‘84 Alfasud 1.5 ti
- 635sharknose
- Posts: 513
- Joined: Fri Sep 13, 2019 4:58 pm
- Location: The Netherlands
- Contact:
Re: Conversion to ellipsoid headlights
Thanks, was thinking of doing that but then I changed my mind. I would like to make it as it is on the late models.
Paul
Instagram: @635sharknose
1987 635CSi Bronzitbeige
Instagram: @635sharknose
1987 635CSi Bronzitbeige