Help Support Bigcoupe.com

acquired a nice PARTS car. NC. 1980 633csi auto. need anything?

Post in this forum for cars and/or parts for sale.

Moderators: ron, bfons, GRNSHRK

Post Reply
User avatar
Jdesign
Posts: 21
Joined: Thu Jan 05, 2017 5:52 pm
Location: Madison, Wisconsin
Contact:
Contact Jdesign

Re: acquired a nice PARTS car. NC. 1980 633csi auto. need anything?

Post by Jdesign » Thu Jul 27, 2017 6:36 pm

Sent you an Email!!
Image
BMW E24 633CSI - BMW M30B32
BMW E30 325IC - Toyota 1JZ-GTE
BMW E36 318i - Ford 5.0 FE302
https://www.instagram.com/_jdesigner_/
Top
User avatar
dwcains
Bigcoupe supporter
Posts: 1476
Joined: Sun Sep 14, 2014 6:01 am
Location: Lutz, FL

Re: acquired a nice PARTS car. NC. 1980 633csi auto. need anything?

Post by dwcains » Thu Jul 27, 2017 8:13 pm

Hi Carl:

Just got the side mirror trim triangles - super-quick shipping - Thanks. The better of the two is much better than the worse on on my car, and the worse one (not too bad) is about the same as my better one. So, this worked out very well for my car. Thanks again.
Dean
Lutz, FL
'85 635 CSi Euro #9402254
'87 Spider Veloce
'92 Spider Veloce
'08 350Z
Image
Top
Carlp336
Bigcoupe supporter
Posts: 347
Joined: Mon Jun 08, 2009 12:55 am
Location: Winston Salem NC
Contact:
Contact Carlp336

Re: acquired a nice PARTS car. NC. 1980 633csi auto. need anything?

Post by Carlp336 » Mon Jul 31, 2017 2:39 pm

added lots of pics.. more to come.
.1977 H&B 630CSI - http://www.sidedraftsix.com.
Top
Carlp336
Bigcoupe supporter
Posts: 347
Joined: Mon Jun 08, 2009 12:55 am
Location: Winston Salem NC
Contact:
Contact Carlp336

Re: acquired a nice PARTS car. NC. 1980 633csi auto. need anything?

Post by Carlp336 » Fri Oct 27, 2017 2:30 pm

Carlp336 wrote: ↑
Mon Jul 31, 2017 2:39 pm
 added lots of pics.. more to come.
bump
.1977 H&B 630CSI - http://www.sidedraftsix.com.
Top
Carlp336
Bigcoupe supporter
Posts: 347
Joined: Mon Jun 08, 2009 12:55 am
Location: Winston Salem NC
Contact:
Contact Carlp336

Re: acquired a nice PARTS car. NC. 1980 633csi auto. need anything?

Post by Carlp336 » Thu Mar 15, 2018 6:39 pm

bumping to move more parts.
.1977 H&B 630CSI - http://www.sidedraftsix.com.
Top
User avatar
Hefeweizen
Senior Member
Posts: 2222
Joined: Thu Jul 17, 2008 1:24 pm
Location: Colorado Springs
Contact:
Contact Hefeweizen

Re: acquired a nice PARTS car. NC. 1980 633csi auto. need anything?

Post by Hefeweizen » Thu Mar 15, 2018 9:10 pm

Carl,

what do you have left?

Rainer
Rainer
85 635CSi (Silver, Daily Driver)
79 633CSi (Red Euro, Project)

"If you think a good European mechanic is expensive, try a bad one!"
Top
Carlp336
Bigcoupe supporter
Posts: 347
Joined: Mon Jun 08, 2009 12:55 am
Location: Winston Salem NC
Contact:
Contact Carlp336

Re: acquired a nice PARTS car. NC. 1980 633csi auto. need anything?

Post by Carlp336 » Thu Mar 15, 2018 9:17 pm

Hefeweizen wrote: ↑
Thu Mar 15, 2018 9:10 pm
 Carl,

what do you have left?

Rainer
tons..have a list or something in mind ?
.1977 H&B 630CSI - http://www.sidedraftsix.com.
Top
User avatar
Hefeweizen
Senior Member
Posts: 2222
Joined: Thu Jul 17, 2008 1:24 pm
Location: Colorado Springs
Contact:
Contact Hefeweizen

Re: acquired a nice PARTS car. NC. 1980 633csi auto. need anything?

Post by Hefeweizen » Sat Mar 17, 2018 10:48 pm

Right of hand I would need a mirror switch
Rainer
85 635CSi (Silver, Daily Driver)
79 633CSi (Red Euro, Project)

"If you think a good European mechanic is expensive, try a bad one!"
Top
Carlp336
Bigcoupe supporter
Posts: 347
Joined: Mon Jun 08, 2009 12:55 am
Location: Winston Salem NC
Contact:
Contact Carlp336

Re: acquired a nice PARTS car. NC. 1980 633csi auto. need anything?

Post by Carlp336 » Mon Mar 19, 2018 3:39 pm

Hefeweizen wrote: ↑
Sat Mar 17, 2018 10:48 pm
 Right of hand I would need a mirror switch
negative.
.1977 H&B 630CSI - http://www.sidedraftsix.com.
Top
Carlp336
Bigcoupe supporter
Posts: 347
Joined: Mon Jun 08, 2009 12:55 am
Location: Winston Salem NC
Contact:
Contact Carlp336

Re: acquired a nice PARTS car. NC. 1980 633csi auto. need anything?

Post by Carlp336 » Fri Sep 21, 2018 8:29 pm

bumping this, lots in storage and available
.1977 H&B 630CSI - http://www.sidedraftsix.com.
Top
Toddz97
Posts: 7
Joined: Sun Jan 01, 2017 1:11 pm
Location: New York, USA
Contact:
Contact Toddz97

Re: acquired a nice PARTS car. NC. 1980 633csi auto. need anything?

Post by Toddz97 » Tue Oct 02, 2018 11:21 pm

Do you have the A/C compressor, i would be interested if it were in working order.
Top
station105
Bigcoupe supporter
Posts: 155
Joined: Tue Mar 16, 2010 7:15 am
Location: australia

Re: acquired a nice PARTS car. NC. 1980 633csi auto. need anything?

Post by station105 » Wed Oct 03, 2018 6:58 am

rear speaker pods, condition?
richard
Top
Webblybear
Posts: 65
Joined: Mon Jan 04, 2010 5:08 am
Location: franklin TN

Re: acquired a nice PARTS car. NC. 1980 633csi auto. need anything?

Post by Webblybear » Sun Oct 07, 2018 3:28 am

What size is the water pump pulley?? I’m looking for “the smaller diameter one” as the one on my e32 literally only allows for about 1/8” between the belt and the lower rad hose.
Top
Tazzarti
Posts: 34
Joined: Fri Sep 26, 2014 5:49 pm
Location: Ontario, Canada

Re: acquired a nice PARTS car. NC. 1980 633csi auto. need anything?

Post by Tazzarti » Tue Oct 09, 2018 3:42 am

I Pm'd you , but do you have any of the following:

1. Injectors
2. Fuel level sender
3. Rear passenger seatbelt assembly
4. Glove box latch
5. center console vent cover

Thanks,
Top
Riehldeal
Posts: 5
Joined: Thu Oct 11, 2018 12:05 am
Location: Portland, OR

Re: acquired a nice PARTS car. NC. 1980 633csi auto. need anything?

Post by Riehldeal » Thu Oct 11, 2018 12:07 am

Hi Carl,

Do you have a front drivers side turn signal?

Thanks,
Colby
Top
User avatar
Hefeweizen
Senior Member
Posts: 2222
Joined: Thu Jul 17, 2008 1:24 pm
Location: Colorado Springs
Contact:
Contact Hefeweizen

Re: acquired a nice PARTS car. NC. 1980 633csi auto. need anything?

Post by Hefeweizen » Thu Oct 11, 2018 11:36 am

Carl, sent you a PM, looking for a good throttle housing
Rainer
85 635CSi (Silver, Daily Driver)
79 633CSi (Red Euro, Project)

"If you think a good European mechanic is expensive, try a bad one!"
Top
GRNSHRK
E12 Based Guru
Posts: 2645
Joined: Thu Apr 08, 2004 3:24 pm
Location: Sunnyvale (SF Bay Area) CA

Re: acquired a nice PARTS car. NC. 1980 633csi auto. need anything?

Post by GRNSHRK » Thu Oct 11, 2018 4:57 pm

Tazzarti, if Carl doesn't have a fuel level sender, I can provide one to you =D>
2. Fuel level sender
Photos below, it was removed from my '80 in the hopes that the replacement would cure my erratic fuel level gauge, when the level got below 1/4 :-?

Alas, it's an issue with the gauge itself ](*,)

So this unit is presumed to still be in functioning order [-o<
Attachments
IMG_3572-sm.jpg
IMG_3572-sm.jpg (41.49 KiB) Viewed 719 times
IMG_3575-sm.jpg
IMG_3575-sm.jpg (57.34 KiB) Viewed 719 times
IMG_3574-sm.jpg
IMG_3574-sm.jpg (46.87 KiB) Viewed 719 times
:mrgreen:
Bobbo
1980 633 CSi
Cypress Green/Pearl Beige
2011 F10 528i
2005 E46 330 Ci ZHP Cabrio
Image

You can never have too many BMW's
Top
dm635
Bigcoupe supporter
Posts: 123
Joined: Thu Oct 07, 2004 2:14 pm
Location: louisville,ky

Front bumper ends

Post by dm635 » Sun Oct 14, 2018 7:17 pm

Looking for a good set of front bumper ends. The rubber ends that have the orange/yellow reflector. Need to have the mounting studs in place. Thanks Dave
Past:
84-318i, 85-318i, 85-635 CSi, 86-635 CSi

Current:
87-635 CSi
Top
Bosozoku
Posts: 3
Joined: Thu Jan 24, 2019 8:29 pm
Location: Los Angeles

Re: acquired a nice PARTS car. NC. 1980 633csi auto. need anything?

Post by Bosozoku » Sat Jan 26, 2019 10:54 pm

Fuel injection system still up for grabs?
Top
Carlp336
Bigcoupe supporter
Posts: 347
Joined: Mon Jun 08, 2009 12:55 am
Location: Winston Salem NC
Contact:
Contact Carlp336

Re: acquired a nice PARTS car. NC. 1980 633csi auto. need anything?

Post by Carlp336 » Mon Feb 04, 2019 2:59 pm

Bosozoku wrote: ↑
Sat Jan 26, 2019 10:54 pm
 Fuel injection system still up for grabs?
negative, sold motor complete.
.1977 H&B 630CSI - http://www.sidedraftsix.com.
Top
Bosozoku
Posts: 3
Joined: Thu Jan 24, 2019 8:29 pm
Location: Los Angeles

Re: acquired a nice PARTS car. NC. 1980 633csi auto. need anything?

Post by Bosozoku » Mon Feb 11, 2019 8:26 pm

Happen to have a sideloader LSD?
Top
Bosozoku
Posts: 3
Joined: Thu Jan 24, 2019 8:29 pm
Location: Los Angeles

Re: acquired a nice PARTS car. NC. 1980 633csi auto. need anything?

Post by Bosozoku » Mon Feb 11, 2019 8:27 pm

Happen to have a sideloader LSD?
Top
Carlp336
Bigcoupe supporter
Posts: 347
Joined: Mon Jun 08, 2009 12:55 am
Location: Winston Salem NC
Contact:
Contact Carlp336

Re: acquired a nice PARTS car. NC. 1980 633csi auto. need anything?

Post by Carlp336 » Mon Feb 11, 2019 8:29 pm

its open
.1977 H&B 630CSI - http://www.sidedraftsix.com.
Top
SORIANOTRON
Posts: 44
Joined: Tue Oct 31, 2017 7:58 pm
Location: Honolulu

Re: acquired a nice PARTS car. NC. 1980 633csi auto. need anything?

Post by SORIANOTRON » Fri Feb 15, 2019 5:59 pm

Do you still have the front, drivers side fender?
Top
Carlp336
Bigcoupe supporter
Posts: 347
Joined: Mon Jun 08, 2009 12:55 am
Location: Winston Salem NC
Contact:
Contact Carlp336

Re: acquired a nice PARTS car. NC. 1980 633csi auto. need anything?

Post by Carlp336 » Fri Feb 15, 2019 6:09 pm

SORIANOTRON wrote: ↑
Fri Feb 15, 2019 5:59 pm
 Do you still have the front, drivers side fender?
please read post #1
.1977 H&B 630CSI - http://www.sidedraftsix.com.
Top
Post Reply

Return to “Cars and Parts for sale”

Who is online

Users browsing this forum: gray635 and 11 guests