Help Support Bigcoupe.com

mwrench subframe fix.

Post in this forum for topics relating to suspension, steering, and brakes

Moderators: bfons, GRNSHRK, ron

1bhp
Posts: 11
Joined: Sun Apr 15, 2018 4:23 pm
Location: London

Re: mwrench subframe fix.

Post by 1bhp » Sat May 19, 2018 12:03 pm

ron wrote:
Sat May 12, 2018 5:30 am
Also heard from Ed yesterday, Bobbo. Glad to hear he is on the mend.
Hi Ron,
Would like to order a kit. I can't PM yet, can you PM me and I'll provide details etc.

cheers. B
London
'89 635csi
'72 914
'96 850R

1bhp
Posts: 11
Joined: Sun Apr 15, 2018 4:23 pm
Location: London

Re: mwrench subframe fix.

Post by 1bhp » Wed May 23, 2018 8:17 pm

Hi Ron,
Just checking you got my previous message, I'd be interested in a kit if you're placing an order or have spare. thanks. Ben
London
'89 635csi
'72 914
'96 850R

ron
Platinum Member
Platinum Member
Posts: 4504
Joined: Sat Jul 10, 2004 11:35 am
Location: South Wales U.K.

Re: mwrench subframe fix.

Post by ron » Wed May 23, 2018 8:57 pm

Hi Ben,

Pls. send details to [email protected]

Thanks

Ron.
They are ALWAYS rustier than you thought!!!!!!
'85 M #228
'87 M #367
'88 High line.
'80 735i
'10 X5

brickwhite
Bigcoupe 100 Post club
Posts: 745
Joined: Wed Sep 01, 2010 3:29 pm
Location: Jackson, MO USA

Re: mwrench subframe fix.

Post by brickwhite » Thu May 24, 2018 6:00 pm

I am in need of one also. Email sent.
- 12 535i
- 92 325ic
- 85 M635csi

sideshowbob
Bigcoupe 100 Post club
Posts: 129
Joined: Mon Aug 01, 2011 2:18 pm
Location: Hampshire UK

Re: mwrench subframe fix.

Post by sideshowbob » Wed Jul 03, 2019 11:02 pm

I have bought one of these reinforcement units. However overall diameter of the unit when I came to have it fitted was too big to go through the hole in the subframe.

I suggested to my mechanic that he should drill out the hole in the subframe but he would not do it, as he was worried about the stuctural integrity of the cross member.

I am not talking about a few thou of an inch but 1- 1.5 mm, which seems a lot seeing as the unit should be ' drifted' into place with friction fit.

Have solved problem temporarily with additional welding to original bracket.

Anyone else experienced this problem.
Last edited by sideshowbob on Thu Jul 04, 2019 8:15 pm, edited 1 time in total.

User avatar
Bhart
Bigcoupe Contributor
Posts: 141
Joined: Fri Sep 25, 2015 10:24 am
Location: Ontario, Canada

Re: mwrench subframe fix.

Post by Bhart » Thu Jul 04, 2019 3:44 am

I bought mine two years ago and just got around to installing it last week. Piece of cake - removed the old mounting bolt, tapped the threaded metal reinforcement device into place from below (fit nice & snug) put some Never Seize on the bolt and tightened it down. Will get someone to give it a tack or two of weld at some point, just to be sure.

Great, simple reinforcement.
01/1987 M6

past Bimmers;
1970 2800CS
1988 325is
1985 325E

User avatar
nick88highline
Bigcoupe 100 Post club
Posts: 327
Joined: Fri Feb 06, 2009 11:31 am
Location: Suffolk, UK

Re: mwrench subframe fix.

Post by nick88highline » Thu Jul 04, 2019 4:08 pm

sideshowbob wrote:
Wed Jul 03, 2019 11:02 pm
I have bought one of these reinforcement units. However whall diameter of thevunitvwen I came to have it fitted the overall diameter was too big to go through the hole in the subframe.

I suggested to my mechanic that he should drill out the hole in the subframe but he would not do it, as he was worried about the sructural integrity of the cross member.

I am not talking about a few thou of an inch but 1- 1.5 mm, which seems a lot seeing as the unit should be ' drifted' into place with friction fit.

Have solved problem temporarily with additional welding to original bracket.

Anyoneelse experienced this problem.
I had to file off the paint around the whole but naturally it's a tight fit. Maybe your subframe has a thicker coating of paint on it? Or perhaps your mechanic already cleared the paint off (as he would have to for welding) and there is some other issue like distortion of the hole caused by someone jacking up on the subframe? Either way, 1mm does not sound a lot and as you are welding this in place (which you really must do) I can't see an issue, the car will not fall in half if you take that much off. :lol:
I actually modified mine by drilling out the threads which allowed a nut and bolt to be used. I could then torque the nut from below the subframe, rather than trying to torque the bolt from above with the exhaust manifold in the way. Obviously I have a right hand drive car, which I suspect you do as well.
Good luck,
Nick
BMW 635CSiA (1988)
BMW i3 (2016)
Jeep Grand Cherokee V8 (2000)
Morris Minor 1000 (1968)

sideshowbob
Bigcoupe 100 Post club
Posts: 129
Joined: Mon Aug 01, 2011 2:18 pm
Location: Hampshire UK

Re: mwrench subframe fix.

Post by sideshowbob » Thu Jul 04, 2019 8:12 pm

The hole was cleaned and prepped for putting the bush into place, but the discrepancy in diameter was far greater than a tight fit, and also a bit more than knocking it into place with a hammer.

We gave it a miss as we were not prepared to start using that amount of force !!
Last edited by sideshowbob on Thu Jul 04, 2019 8:20 pm, edited 1 time in total.

tmoretta
Posts: 85
Joined: Mon Feb 06, 2017 8:30 pm
Location: Connecticut, U.S.A.

Re: mwrench subframe fix.

Post by tmoretta » Wed Dec 04, 2019 10:57 pm

I have e-mailed Ed about his subframe fix - no response yet. Anyone else making it?

baders
Platinum Member
Platinum Member
Posts: 1083
Joined: Sun Nov 23, 2014 7:38 am
Location: Perth Australia

Re: mwrench subframe fix.

Post by baders » Thu Dec 05, 2019 1:48 pm

tmoretta if you're after one then I have a spare. I got a second one from Ron after the first was lost in the post, which then turned up much later (AusPost :twisted: ). Let me know if you want it and I will send it postage cost only.
1986 635csi LOCUTUS / Arktis Blau Metallic / Pearl Beige / S38B36/ Close ratio dogleg 5sp
2002 E46 M3 / Topaz Blau Metallic / Black Nappa / 6 speed SMG software tuned / Bilstein PSS10 Coilovers / CMP RACP reinforcement

tmoretta
Posts: 85
Joined: Mon Feb 06, 2017 8:30 pm
Location: Connecticut, U.S.A.

Re: mwrench subframe fix.

Post by tmoretta » Thu Dec 05, 2019 9:02 pm

Yes, I could use it. What would post cost to Connecticut U.S.A. 06365? Would you take PayPal?

baders
Platinum Member
Platinum Member
Posts: 1083
Joined: Sun Nov 23, 2014 7:38 am
Location: Perth Australia

Re: mwrench subframe fix.

Post by baders » Fri Dec 06, 2019 12:05 am

tmoretta wrote:
Thu Dec 05, 2019 9:02 pm
Yes, I could use it. What would post cost to Connecticut U.S.A. 06365? Would you take PayPal?
Paypal is fine. PM me your details and I will find out cost of postage and reply.
1986 635csi LOCUTUS / Arktis Blau Metallic / Pearl Beige / S38B36/ Close ratio dogleg 5sp
2002 E46 M3 / Topaz Blau Metallic / Black Nappa / 6 speed SMG software tuned / Bilstein PSS10 Coilovers / CMP RACP reinforcement

TimothyMcHone24
Posts: 4
Joined: Tue Feb 11, 2020 2:13 am
Location: NC

Re: mwrench subframe fix.

Post by TimothyMcHone24 » Tue Feb 11, 2020 2:26 am

Hey would anyone know where I could currently purchase one of these kits? My steering box mount is broke broke.

GRNSHRK
Platinum Member
Platinum Member
Posts: 2899
Joined: Thu Apr 08, 2004 3:24 pm
Location: Gilroy (SF Bay Area) CA

Re: mwrench subframe fix.

Post by GRNSHRK » Tue Feb 11, 2020 2:54 am

Timothy, did you try reaching out to Ed directly yet first :-k

We're "local" and I can see if I can find out what's up, etc. :-?

Ed's no spring chicken and has had to deal with some health issues of late :(
:mrgreen:
Bobbo
1980 633 CSi Cypress Green/Pearl Beige
2017 X5 M Sport Xdrive 35i Carbon Black/Ivory White
2005 330 Ci ZHP Cabrio Imola Red/Bone/Black
Image

TimothyMcHone24
Posts: 4
Joined: Tue Feb 11, 2020 2:13 am
Location: NC

Re: mwrench subframe fix.

Post by TimothyMcHone24 » Tue Feb 11, 2020 3:07 am

Oh no I'm sorry to hear that! I haven't, I'll try reaching out to him for sure!

emac
Posts: 67
Joined: Thu Feb 06, 2020 2:57 am
Location: SC

Re: mwrench subframe fix.

Post by emac » Tue Feb 11, 2020 3:13 am

I sent money to Ed today for a kit. He said he has some in stock and will ship asap.

TimothyMcHone24
Posts: 4
Joined: Tue Feb 11, 2020 2:13 am
Location: NC

Re: mwrench subframe fix.

Post by TimothyMcHone24 » Tue Feb 11, 2020 3:33 am

Oh sweet, can I ask how to get into direct contact with him?

GRNSHRK
Platinum Member
Platinum Member
Posts: 2899
Joined: Thu Apr 08, 2004 3:24 pm
Location: Gilroy (SF Bay Area) CA

Re: mwrench subframe fix.

Post by GRNSHRK » Tue Feb 11, 2020 11:30 pm

Here ya go \:D/

http://www.mwrench.com/

Got his direct E addy as well in there [-o<
:mrgreen:
Bobbo
1980 633 CSi Cypress Green/Pearl Beige
2017 X5 M Sport Xdrive 35i Carbon Black/Ivory White
2005 330 Ci ZHP Cabrio Imola Red/Bone/Black
Image

TimothyMcHone24
Posts: 4
Joined: Tue Feb 11, 2020 2:13 am
Location: NC

Re: mwrench subframe fix.

Post by TimothyMcHone24 » Wed Feb 12, 2020 5:06 pm

Much appreciated!

emac
Posts: 67
Joined: Thu Feb 06, 2020 2:57 am
Location: SC

Re: mwrench subframe fix.

Post by emac » Fri Feb 14, 2020 2:56 am

Received mine today. Perfect fit, very easy install.

wattsmonkey
Platinum Member
Platinum Member
Posts: 1502
Joined: Mon Jul 16, 2007 2:58 pm
Location: Cheltenham, U.K.

Re: mwrench subframe fix.

Post by wattsmonkey » Fri May 29, 2020 6:38 pm

Have fitted these to three cars I've owned - the last one being the project car only a few weeks ago. The fit was perfect, but a previous crap repair (that I hadn't even noticed) meant a blob of old weld needed to be removed.

Very pleasing, every time.
"Most of it necessary; all of it enjoyable." LJKS
'84 635CSi, dogleg...itbs and supercharger????? Eaton Mess

ron
Platinum Member
Platinum Member
Posts: 4504
Joined: Sat Jul 10, 2004 11:35 am
Location: South Wales U.K.

Re: mwrench subframe fix.

Post by ron » Fri May 29, 2020 6:50 pm

I still have some for sale.
They are ALWAYS rustier than you thought!!!!!!
'85 M #228
'87 M #367
'88 High line.
'80 735i
'10 X5

Nosser
Posts: 4
Joined: Mon Jul 20, 2020 2:29 pm
Location: MN

Re: mwrench subframe fix.

Post by Nosser » Mon Jul 20, 2020 3:13 pm

Would like to purchase one of these as my new-to-me (and first!) e24 is in desperate need. I am a brand new member of the board so do not yet have the ability to PM - is there another way I can reach you to buy one?

ron
Platinum Member
Platinum Member
Posts: 4504
Joined: Sat Jul 10, 2004 11:35 am
Location: South Wales U.K.

Re: mwrench subframe fix.

Post by ron » Mon Jul 20, 2020 3:17 pm

Try contacting Ed here:-http://www.mwrench.com/
They are ALWAYS rustier than you thought!!!!!!
'85 M #228
'87 M #367
'88 High line.
'80 735i
'10 X5

Nosser
Posts: 4
Joined: Mon Jul 20, 2020 2:29 pm
Location: MN

Re: mwrench subframe fix.

Post by Nosser » Mon Jul 20, 2020 3:26 pm

Will do - thank you!

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests