Need to lengthen my UUC - Dual Shear Selector Rod.
Need to get a confirmation of length (pin center to pin center). Have not pulled the actual one out of the car yet. But I attempted to measure it with a pair of large dividers. Looks to be 197mm from pin center to pin center. UUC sent me a 147mm.
Getrag 260/6 from 1986 635csi
My plan is to cut the UUC - DSSR in half then tig weld a 5/8” ID - tube shaft to lengthen to correct size.
If someone in the group knows the selector rod length or has one laying around the shop that could make a quick center to center measurement, I would greatly appreciate it.
Thanks
Rick
Getrag 260/6 selector rod Length ??
Moderators: GRNSHRK, ron, bfons
- Rick Eickhoff
- Posts: 48
- Joined: Wed Nov 07, 2018 4:48 pm
- Location: Philadelphia
Getrag 260/6 selector rod Length ??
Rick Eickhoff
SE Pennsylvania
1988 635csi
SE Pennsylvania
1988 635csi
- Rick Eickhoff
- Posts: 48
- Joined: Wed Nov 07, 2018 4:48 pm
- Location: Philadelphia
Re: Getrag 260/6 selector rod Length ??
The correct length is 187mm center to center
Modified it to 197mm - tried to measure it form under the car using a big set of dividers
Bad idea !
Will cut it and take 10mm out of the OAL
Have no idea why UUC recommend a 147mm - maybe that is the correct size for the Getrag 265
Modified it to 197mm - tried to measure it form under the car using a big set of dividers
Bad idea !
Will cut it and take 10mm out of the OAL
Have no idea why UUC recommend a 147mm - maybe that is the correct size for the Getrag 265
- Attachments
-
- DA43AFCF-19A9-4B2E-B8E8-F89ADD8F68C1.jpeg (1.72 MiB) Viewed 2215 times
Rick Eickhoff
SE Pennsylvania
1988 635csi
SE Pennsylvania
1988 635csi
-
- Platinum Member
- Posts: 3312
- Joined: Thu Sep 28, 2006 9:28 pm
- Location: scottsdale, arizona
- Contact:
Re: Getrag 260/6 selector rod Length ??
UUC is a sort shift assembly so it all is in conjunction as a unit. That is not a stock rod you show and again is from a short shift kit
81 Euro 635 M90 with motronic. Currently under a complete nut and bolt restoration. Pictures at
flickr.com/photos/bertsphotos.
flickr.com/photos/bertsphotos.
Re: Getrag 260/6 selector rod Length ??
Selector rod length affects the position of the shift knob. BUT, so does any bend in the shift lever. Install it all and then see how it works.
BillW
1987 635csi
1987 535is
1985 528e
1972 2002tii
1968 VW Beetle convertible
1983 Mercedes 380sl
1997 318ti
1998 M3
1987 635csi
1987 535is
1985 528e
1972 2002tii
1968 VW Beetle convertible
1983 Mercedes 380sl
1997 318ti
1998 M3
- 86_6series
- Platinum Member
- Posts: 1069
- Joined: Mon Apr 02, 2007 10:08 pm
- Location: West Nyack, NY
Re: Getrag 260/6 selector rod Length ??
Rick,
I ran into the same problem when I swapped a 260/6 in my 86 US
car from an 86 US donor. Bought the rod from Bav Auto and had the same problem.
Listed was 147 but your right, the correct length is 187.
At the time, Bav Auto was very helpful in getting me the 187 from UUC.
I don't remember what listing the 187 is under.
I spoke to UUC and told them to fix the error but I guess
it was more important to have customers like you get frustrated.
Bob V
I ran into the same problem when I swapped a 260/6 in my 86 US
car from an 86 US donor. Bought the rod from Bav Auto and had the same problem.
Listed was 147 but your right, the correct length is 187.
At the time, Bav Auto was very helpful in getting me the 187 from UUC.
I don't remember what listing the 187 is under.
I spoke to UUC and told them to fix the error but I guess
it was more important to have customers like you get frustrated.
Bob V
86-635CSi
96-MB C220 SOLD
98-740i
71-Continental MK3
96-MB C220 SOLD
98-740i
71-Continental MK3