WTB: Motronic 1.3 parts

Post in this forum for cars and/or parts wanted.

Moderators: GRNSHRK, ron, bfons

Post Reply
nerd of nerds

WTB: Motronic 1.3 parts

Post by nerd of nerds »

I am looking to convert my 83 633csi to motronic 1.3 (179) in the future. Here's a list of what I need:

027 AFM
Crank pulley, crank position sensor and mounting hardware, and ICV out of an 87-89 E24 M30 or any E34 M30
Wiring harness out of an 87-89 635CSI or L6
A known good 179 ECU

The other sensors, injectors, plug wires I will be buying new to avoid any mishaps when installing the harness.
User avatar
Ralph in Socal
Platinum Member
Platinum Member
Posts: 2746
Joined: Tue Apr 14, 2009 3:32 am
Location: High Desert of SoCal

Post by Ralph in Socal »

I just sold my 88 harness but add your location to your profile so the members closer to you can help. Some of the parts you ask for are easily found in e32 and e34 cars but the harness for the 88/89 e24 will be the hard-to-find item in good uncut condition.

Ralph
There is a very fine line between "Hobby" and Mental Illness.

85 635csi Zinno Auto
84 528i Euro
83 635 Euro Arktik
81 528i Kastanien 5-speed
88 528e Bronzit (Granpa Car)
86 535i Auto (For Sale)
81 633 csi (retired)
nerd of nerds

Post by nerd of nerds »

I have tracked down the trigger wheel and hardware. I will probably just get the sensor along with the new goodies.

If it comes down to it I might just order the harness new. getbmwparts has them for $209.

Is the C101 connector the same for 83 as it is for 89?
User avatar
Ralph in Socal
Platinum Member
Platinum Member
Posts: 2746
Joined: Tue Apr 14, 2009 3:32 am
Location: High Desert of SoCal

Post by Ralph in Socal »

From previous postings, the 88/89 harness is on perpetual backorder. Please try to order and let the BC group know.

Ralph
There is a very fine line between "Hobby" and Mental Illness.

85 635csi Zinno Auto
84 528i Euro
83 635 Euro Arktik
81 528i Kastanien 5-speed
88 528e Bronzit (Granpa Car)
86 535i Auto (For Sale)
81 633 csi (retired)
team2win

Re: WTB: Motronic 1.3 parts

Post by team2win »

nerd of nerds wrote:I am looking to convert my 83 633csi to motronic 1.3 (179) in the future. Here's a list of what I need:

027 AFM
Crank pulley, crank position sensor and mounting hardware, and ICV out of an 87-89 E24 M30 or any E34 M30
Wiring harness out of an 87-89 635CSI or L6
A known good 179 ECU

The other sensors, injectors, plug wires I will be buying new to avoid any mishaps when installing the harness.
I'm parting out my 88, let me know if you still need parts...
Post Reply