Page 1 of 1

WTB Rear Lower Spring Perch for e28 based Bilsteins

Posted: Fri Jul 31, 2020 2:12 am
by Tazzarti
I'm putting e28 springs on my 81 633's Bilstein's. The shocks that donated the top hats did not have a removable spring plate. I'm looking just for two metal spring plates for the lower part of the rear shock to hold the rubber perch.

Thanks,

Re: WTB Rear Lower Spring Perch for e28 based Bilsteins

Posted: Fri Jul 31, 2020 6:01 pm
by bpoliakoff
Top hats between an E28 chassis and E12 chassis are different. Something doesn't make sense

Re: WTB Rear Lower Spring Perch for e28 based Bilsteins

Posted: Fri Aug 07, 2020 9:47 pm
by GRNSHRK
Tazzarti, I've got this pair, but I would presume that they are for E12 based, as that's what I have and would not likely have any E28 based parts :-?

I put the steel tape there so that you can see the inner diameter [-o<

Lemme know if you are interested :lol:

Re: WTB Rear Lower Spring Perch for e28 based Bilsteins

Posted: Fri Aug 07, 2020 10:19 pm
by bpoliakoff
bpoliakoff wrote: Fri Jul 31, 2020 6:01 pm Top hats between an E28 chassis and E12 chassis are different. Something doesn't make sense
Springs are different as well