PARTING OUT: 1989 BMW 635 CSI e24- *RARE* BLACK/BLACK
Moderators: GRNSHRK, ron, bfons
I need the tow hook cover plate from the front fairing~~either car would work~~if youre willing to sell such please shoot me your price and payment info
I'm in Philly (19145)
Thanks
Lenny Q
[email protected]
I'm in Philly (19145)
Thanks
Lenny Q
[email protected]
Rick
I'm looking for the base the oil filter canister is mounted to that bolts to the motor. I need the one where the bolt enters from the top with the threads on the bottom. Will you send me a pix to [email protected]?
I can't use the one where the bolt enters from the bottom with the threads on top. Too hard to work with.
Also stainless steel brake lines to fit my '82Euro.
If not, it took thirty years for them to wear out, so, it's okay.
Thanx in advance,,,,Greg
I'm looking for the base the oil filter canister is mounted to that bolts to the motor. I need the one where the bolt enters from the top with the threads on the bottom. Will you send me a pix to [email protected]?
I can't use the one where the bolt enters from the bottom with the threads on top. Too hard to work with.
Also stainless steel brake lines to fit my '82Euro.
If not, it took thirty years for them to wear out, so, it's okay.
Thanx in advance,,,,Greg
Hit the apex
in Long Beach, Cal
Buster/'82Euro6 Build Date 9/81
Rosallina/'80 528i Build Date 4/80
in Long Beach, Cal
Buster/'82Euro6 Build Date 9/81
Rosallina/'80 528i Build Date 4/80
Need rear self levelling shocks
Hi there I have a late 1988 635csi.
I'm chasing rear self levelling shocks.
I'm based in Sydney / Australia.
If available could you please advise cost including freight.
Thanks and regards
Ken
I'm chasing rear self levelling shocks.
I'm based in Sydney / Australia.
If available could you please advise cost including freight.
Thanks and regards
Ken
-
- Posts: 2072
- Joined: Wed May 23, 2007 11:31 pm
- Location: Baltimore .Md HON
If you still have the black upper door panels in vinyl finish, interested in the left and right side if in good condition. I know that you sold the tweeter speakers, but could use the panels with the hole block outs to upgrade my holeless panels.
1985 Euro 635CSi CR 5-Spd (Schwartz/Anthracite Buffalo)
1985 Euro 635CSi CR 5-Spd (Polaris/Schwartz)
1985 Euro 628CSi (Zobelbraun/Nutria Buffalo) ...Rehomed
2002 540iT Sport 5-Spd (Schwartz/Schwartz)
https://www.flickr.com/photos/hawaiisharkfest/sets
1985 Euro 635CSi CR 5-Spd (Polaris/Schwartz)
1985 Euro 628CSi (Zobelbraun/Nutria Buffalo) ...Rehomed
2002 540iT Sport 5-Spd (Schwartz/Schwartz)
https://www.flickr.com/photos/hawaiisharkfest/sets
Re: PARTING OUT: 1989 BMW 635 CSI e24- *RARE* BLACK/BLACK
Hi, looking for a bunch of "Smalls"
Under hood light and switch
Both rear license plate lights
Left (drivers side) tail light lens
Under dash pannel, drivers side, above pedals
Control box for Self leveling suspension, (Under car just ahead of spare tire well) has small "Arm" on it attached to portion bar
Please respond to me directly
[email protected]
Thanks
Under hood light and switch
Both rear license plate lights
Left (drivers side) tail light lens
Under dash pannel, drivers side, above pedals
Control box for Self leveling suspension, (Under car just ahead of spare tire well) has small "Arm" on it attached to portion bar
Please respond to me directly
[email protected]
Thanks
Re: PARTING OUT: 1989 BMW 635 CSI e24- *RARE* BLACK/BLACK
This thread is 8 years old.....this remnants of this car are probably crumpled soda cans at this point.Ericjump wrote: ↑Thu May 21, 2020 3:10 pm Hi, looking for a bunch of "Smalls"
Under hood light and switch
Both rear license plate lights
Left (drivers side) tail light lens
Under dash pannel, drivers side, above pedals
Control box for Self leveling suspension, (Under car just ahead of spare tire well) has small "Arm" on it attached to portion bar
Please respond to me directly
[email protected]
Thanks
Current Bavarians-
'82 635CSi Euro- Hennarot/Tan Recaro, CR Dogleg
'75 2002- Taiga/Tan
'19 i3 REX
Previous sharks-
'81 635CSi Euro- Hennarot/Black Recaro, CR Dogleg
'86 635CSi- Arktisblau/Tan Recaro interior, 5 speed
'82 635CSi Euro- Hennarot/Tan Recaro, CR Dogleg
'75 2002- Taiga/Tan
'19 i3 REX
Previous sharks-
'81 635CSi Euro- Hennarot/Black Recaro, CR Dogleg
'86 635CSi- Arktisblau/Tan Recaro interior, 5 speed
Re: PARTING OUT: 1989 BMW 635 CSI e24- *RARE* BLACK/BLACK
Heres my list, let me know if you still have any of these parts left
Left and right brake light lenses, (Don't have to be perfect)
Under driver side kick panel (up under dash) cut outs for pedals
Under hood light and switch
Panel in trunk (carpet covered) up under speakers, (covers trunk springs)
Rubber for front bumpers (don't have to be perfect)
SLS control box from under car with control arm to rear sway arm
Plastic tubing in hood for washers
Thanks,
Eric
[email protected]
Left and right brake light lenses, (Don't have to be perfect)
Under driver side kick panel (up under dash) cut outs for pedals
Under hood light and switch
Panel in trunk (carpet covered) up under speakers, (covers trunk springs)
Rubber for front bumpers (don't have to be perfect)
SLS control box from under car with control arm to rear sway arm
Plastic tubing in hood for washers
Thanks,
Eric
[email protected]
Re: PARTING OUT: 1989 BMW 635 CSI e24- *RARE* BLACK/BLACK
As stated, the thread is 8 years old. You're not going to do much good. Better to post a new thread in the Car and Parts wanted section.
1986 635csi LOCUTUS / Arktis Blau Metallic / Pearl Beige / S38B36/ Close ratio dogleg 5sp
2002 E46 M3 / Topaz Blau Metallic / Black Nappa / 6 speed SMG software tuned / Bilstein PSS10 Coilovers / CMP RACP reinforcement
2002 E46 M3 / Topaz Blau Metallic / Black Nappa / 6 speed SMG software tuned / Bilstein PSS10 Coilovers / CMP RACP reinforcement