Looking to replace set of original OEM shock absorbers with Bilsteins.
Car is at standard ride height, on 17" RC090 wheels.
Do I go for B4 or B6
I am sure B4's will be an improvement over my worn shocks...but will B6 be a step too far.
Looking for a firm but sporty ride.
Over the last couple of years most worn bushes and ball joints have been replaced, so shock absorbers and top mounts are the final bit.
Thanks
Bilsteins B4 or B6
Moderators: GRNSHRK, ron, bfons
-
- Posts: 247
- Joined: Mon Aug 01, 2011 2:18 pm
- Location: Hampshire UK
-
- Posts: 247
- Joined: Mon Aug 01, 2011 2:18 pm
- Location: Hampshire UK
Re: Bilsteins B4 or B6
Thanks...going for B6's
Re: Bilsteins B4 or B6
Hi. Did you fit your bilstein b6 front suspension. ? If so , how's it handling. ? Just about to order for my 87 alpina. . Where did you order from , and do you have a part number. ? .. regards.
-
- Platinum Member
- Posts: 3312
- Joined: Thu Sep 28, 2006 9:28 pm
- Location: scottsdale, arizona
- Contact:
Re: Bilsteins B4 or B6
Alpina Bilsteins were custom valved to their specs. B4s won't do. The problem is that with lowering springs you need a shorter stroke shock or the springs can lift off their perches. B8 sports are the proper shock to get. However, I would send your original Bils back to Bil for rebuilding . It will cost as much as new ones but you will have everything correct and have the quality of a new shock proper for the Alpina suspension.. If you choose not to go this way B6s for sure.
81 Euro 635 M90 with motronic. Currently under a complete nut and bolt restoration. Pictures at
flickr.com/photos/bertsphotos.
flickr.com/photos/bertsphotos.
-
- Posts: 247
- Joined: Mon Aug 01, 2011 2:18 pm
- Location: Hampshire UK
Re: Bilsteins B4 or B6
Have not had them fitted as yet.
Bilstein are struggling to supply.
I was planning to have the suspension altered when I had a new stainless exhaust and manifold fitted, this has now been put back and will be completed when the car is converted from auto to 5 speed manual....but that's another story, late July early August !!
Bilstein are struggling to supply.
I was planning to have the suspension altered when I had a new stainless exhaust and manifold fitted, this has now been put back and will be completed when the car is converted from auto to 5 speed manual....but that's another story, late July early August !!
-
- Platinum Member
- Posts: 4492
- Joined: Tue Mar 16, 2010 8:32 pm
- Location: usually in the barn, Kent, England.
Re: Bilsteins B4 or B6
Have you tried this outfit?
onlinecarparts.co.uk
onlinecarparts.co.uk