Help Support Bigcoupe.com

S38 ignition wiring set

Post here for mechanical and engine topics such as fuel issues, transmission problems, rough idle, exhaust, electrical issues, etc

Moderators: ron, bfons, GRNSHRK

Post Reply
Emmanuel M6
Posts: 42
Joined: Fri Aug 07, 2015 11:07 pm
Location: Corby Northamptonshire

S38 ignition wiring set

Post by Emmanuel M6 » Tue Oct 05, 2021 2:21 pm

Greetings all hope you and yours and your rides are good. I've had two no starts because of the coil lead to my ignition lead set. I have been told I need a new set. BMW no longer make it. I've looked at aftermarket ones which say they are suitable for my BMW 1985 M635 but when I put in the chassis no. It comes up unsuitable for my vehicle. Can anyone recommend a good aftermarket set that they know fits my car; or any other viable solutions please? Thanks in advance. Emmanuel M6
1985 M635csi
Location Corby Northants, previously London U.K.

dlvad
Platinum Member
Platinum Member
Posts: 426
Joined: Sat Apr 03, 2004 2:57 pm
Location: Healdsburg, NorCal & Baja Sur, MX

Re: S38 ignition wiring set

Post by dlvad » Tue Oct 05, 2021 5:52 pm

Kingsborne Wire Works is the way to go, there are a couple of existing threads regarding this topic.

Contact [email protected]
http://www.kingsborne.com/
DV
////// Motorsports & Vintage Coupes
ALPINA Youngtimers of Course...
BMWCCCA

Emmanuel M6
Posts: 42
Joined: Fri Aug 07, 2015 11:07 pm
Location: Corby Northamptonshire

Re: S38 ignition wiring set

Post by Emmanuel M6 » Fri Oct 08, 2021 12:21 am

Thanks very much for your help. Will let you know how I get on. Emmanuel
1985 M635csi
Location Corby Northants, previously London U.K.

User avatar
DC
Bigcoupe 100 Post club
Posts: 467
Joined: Mon Feb 06, 2006 8:29 pm
Location: Czechia - Germany neighbou
Contact:

Re: S38 ignition wiring set

Post by DC » Tue Oct 12, 2021 11:12 am

hi, I can recommend https://www.formulapower.com/

I have 10mm sport ignition cables for my M6 from them and they are perfect
kabely.jpg
kabely.jpg (538.8 KiB) Viewed 64 times
M6 - Marwin
628CSi Turbo - Britney
BMW-Faszination aus Technik und Design

Pod
Platinum Member
Platinum Member
Posts: 4247
Joined: Tue Mar 16, 2010 8:32 pm
Location: usually in the barn, Kent, England.

Re: S38 ignition wiring set

Post by Pod » Tue Oct 12, 2021 4:05 pm

DC wrote:
Tue Oct 12, 2021 11:12 am
hi, I can recommend https://www.formulapower.com/

I have 10mm sport ignition cables for my M6 from them and they are perfect

kabely.jpg
These look interesting - and are also significantly less expensive than some I have seen! I have contacted the manufacturer to see if he would be interested in offering a group buy price. I will let you all know how I get on....

Emmanuel M6
Posts: 42
Joined: Fri Aug 07, 2015 11:07 pm
Location: Corby Northamptonshire

Re: S38 ignition wiring set

Post by Emmanuel M6 » Fri Oct 15, 2021 9:52 pm

Thanks for getting back. I did see a sports set on eBay but when I quizzed the seller re compatibility he was a bit vague. I bought a set for £373 from a manufacturer called intermotor. I haven't fitted them yet but will let you know.
Emmanuel
1985 M635csi
Location Corby Northants, previously London U.K.

Emmanuel M6
Posts: 42
Joined: Fri Aug 07, 2015 11:07 pm
Location: Corby Northamptonshire

Re: S38 ignition wiring set

Post by Emmanuel M6 » Fri Oct 15, 2021 10:01 pm

Did you have to fit a pulse generator to any of the leads taken from the or ones please? Thanks. Emmanuel
1985 M635csi
Location Corby Northants, previously London U.K.

Post Reply

Who is online

Users browsing this forum: No registered users and 19 guests