Power steering hose

Post here for mechanical and engine topics such as fuel issues, transmission problems, rough idle, exhaust, electrical issues, etc

Moderators: GRNSHRK, ron, bfons

Post Reply
User avatar
Theantony
Posts: 124
Joined: Mon Dec 09, 2013 6:01 pm
Location: London, UK

Power steering hose

Post by Theantony »

Anyone know the oem for the power steering pipe. Cheers Antony.
5F330353-39D8-4A0D-83AC-33645FFCE29B.jpeg
5F330353-39D8-4A0D-83AC-33645FFCE29B.jpeg (127.84 KiB) Viewed 3797 times
User avatar
cornwallis
Posts: 35
Joined: Sat Nov 28, 2015 11:12 pm
Location: Houston, Texas

Re: Power steering hose

Post by cornwallis »

Hard to say which one you’re looking for, the high pressure hose to the steering pump?

#1 below is 32411134803, for 1985 E24.
Attachments
5F835694-5ED9-4579-A5CA-1F2D6A004E62.jpeg
5F835694-5ED9-4579-A5CA-1F2D6A004E62.jpeg (89.91 KiB) Viewed 3778 times
Hector :twisted:
____________________________________________________________
1985 635 CSi, Auto
User avatar
Theantony
Posts: 124
Joined: Mon Dec 09, 2013 6:01 pm
Location: London, UK

Re: Power steering hose

Post by Theantony »

Is it this one.
Attachments
52B5C574-7083-4D64-A38F-C712A6E9193E.jpeg
52B5C574-7083-4D64-A38F-C712A6E9193E.jpeg (1022.53 KiB) Viewed 3766 times
User avatar
Da_Hose
Platinum Member
Platinum Member
Posts: 3236
Joined: Fri Mar 07, 2008 8:15 am
Location: Santa Ana, CA.

Re: Power steering hose

Post by Da_Hose »

When I replaced my pump, the friggin power steering feed hose was a pain to source for some reason. I tried a couple different brands thinking the clamp would seal, but they leaked until I bought the metric, BMW hose.

Hope you can find the hoses quick.

Jose
1987 M6 - My dream car
User avatar
Chzman
Posts: 6
Joined: Fri May 14, 2021 3:25 pm
Location: Idaho

Re: Power steering hose

Post by Chzman »

Having the same issues here. Hoses are NLA as far as I can tell, but Rockauto had the largest/longest high-pressure hose from the accumulator valve to the PS pump, but it was not cheap! Got it yesterday and it looks like a good fit to OEM. I think FCP Euro had another one.

I am having a local hose manufacturing company make the other 2 high-pressure lines once I get them off and in their hands. Tech said he can build what I need with AN fittings and 3000 psi tubing, though not stock looking, it will get the car back on the road and stop the leaking!!

I have a 1989 so I think the hose numbers are different to your model.
My numbers:
32-41-1-133-388 - accumulator valve to steering box
32-41-1-137-806 - accumulator valve to PS pump (one I bought)

I have 3 total high-pressure lines, but the realOEM diagram only shows 2, that is one reason to have them built locally.

Someone is missing a great aftermarket opportunity here to reman those hoses and fittings, pretty much all of the 6's out there are going to need them. Wish I had the resources to do the work.
Thanks,

Chuck Jenkins
[email protected]
1968 BMW 2002
1977 BMW 320i
1989 BMW 635CSI - Last 7 = 3268048
Got all 3 decades covered...
northNH
Posts: 32
Joined: Tue Dec 12, 2017 11:29 pm
Location: New Hampshire USA

Re: Power steering hose

Post by northNH »

I have an unneeded used hose noted as #1 above, from an ‘86 CSI…
It is OEM BMW and is in excellent condition from end to end.
Rubber hose sections good as new.
You won’t find a better used one, if that’s the route you want to go.
Open to a reasonable offer,
Michael in NH
D19EB83D-1EDA-4E5F-80A1-0A190C7E720F.jpeg
D19EB83D-1EDA-4E5F-80A1-0A190C7E720F.jpeg (452.85 KiB) Viewed 3448 times
CFF6D154-30D3-4989-9A98-2DB66270C4E4.jpeg
CFF6D154-30D3-4989-9A98-2DB66270C4E4.jpeg (474.67 KiB) Viewed 3448 times
Attachments
F28AA718-CAA9-4569-90FF-3472C25A5627.jpeg
F28AA718-CAA9-4569-90FF-3472C25A5627.jpeg (415.76 KiB) Viewed 3448 times
'86 635 5spd 175K Blk/blk orig paint/int
‘88 M6 24K time capsule Black/gray
'92 MBz 300CE Sportlined 175K Blk/wine orig paint/int
‘94 MBz E320 wagon
'62 Volvo Amazon 65K mile time capsule

One lucky guy...
User avatar
RossDinan6
Posts: 295
Joined: Mon Jan 29, 2007 2:35 am
Location: SW FL, USA

Re: Power steering hose

Post by RossDinan6 »

When I refurbished my PS system a while back I took the HP hoses to my local Aeroquip distributor. They cut off the hose at the crimp and welded on a tube to JIC adapter. In the future any hydraulic shop can make up a hose for it Not original, but this car isn't slated for a trip on the grass at Pebble Beach.

Now, does anyone have a clue about the union looking crimp in the middle of the hose?
Ross
'84 633 Dinan turbo
bpoliakoff
Platinum Member
Platinum Member
Posts: 3312
Joined: Thu Sep 28, 2006 9:28 pm
Location: scottsdale, arizona
Contact:

Re: Power steering hose

Post by bpoliakoff »

I tried to have my hose rebuilt with the crimp in the middle. That crimp holds a restrictor under it. It takes a special type of crimping die to do it and I couldn't find a hydraulic shop that could. Ended up just going dealer new. As to the ends, there wouldn't have been a problem crimping the original fittings to the new hose
81 Euro 635 M90 with motronic. Currently under a complete nut and bolt restoration. Pictures at
flickr.com/photos/bertsphotos.
Post Reply