Help Support Bigcoupe.com

Help with part identification

Post in this forum for topics relating to the exterior. This includes body, windows, and accessories

Moderators: ron, bfons, GRNSHRK

Post Reply
jonty72
Posts: 7
Joined: Sun Aug 19, 2018 6:24 am
Location: Australia

Help with part identification

Post by jonty72 » Mon Mar 01, 2021 1:06 am

Hi,

I am seeking a bit of help in identifying two parts for my 1986 RHD 635 Auto.

The first part is a plastic window guide held on by 4 screws to the door pillar that the rubber window guide part# 51361886969(L) or 51361886970 (R) is adjacent to (the rubber guides the rear window against the B pillar).

In the attached Bentley manual I have circled the part which the manual describes as the window guide on the door pillar. NB I have a new rubber window guide it is the plastic "window guide" I am looking for a part number.
Capture.PNG
Capture.PNG (239.04 KiB) Viewed 2822 times
Also attached is a photo of the part with the relevant rubber window guide and another photo of it's location on the left side of the vehicle. From looking at both the Maxamillion and Wallothnesch websites the rubber window guide is easy enough to find in the vehicle/trim/glasses section however I cannot seem to locate the plastic window guide.
635.jpg
635.jpg (223.42 KiB) Viewed 2822 times
Window Guide.jpg
Window Guide.jpg (29 KiB) Viewed 2822 times
The other part I was seeking assistance with a part number for is the rubber conduit that contains the door electrical wiring where the wiring runs from the door into the front column.
Door Conduit.jpg
Door Conduit.jpg (152.49 KiB) Viewed 2822 times
Any help would me most appreciated.

Thanks Jason
1986 E24 635Csi Diamantschwarz Metallic RHD
2015 F32 428i Alpine Weiss

User avatar
jps635
Platinum Member
Platinum Member
Posts: 829
Joined: Sat Feb 27, 2010 10:50 pm
Location: NZ

Re: Help with part identification

Post by jps635 » Mon Mar 01, 2021 8:27 am

Can't help with the guide but the flexible rubber boot from the door to door pillar is part of the door wiring loom.
'85 635csi JPS (RA2-66)

User avatar
635sharknose
Bigcoupe 100 Post club
Posts: 486
Joined: Fri Sep 13, 2019 4:58 pm
Location: The Netherlands
Contact:

Re: Help with part identification

Post by 635sharknose » Mon Mar 01, 2021 8:03 pm

I remember someone once posted about replacing those cable rubbers.
He had made new ones based on rubber from a newer type of BMW.
Unfortunately I can no longer find it.
Paul
Image
Instagram: @635sharknose
1987 635CSi Bronzitbeige

User avatar
hornhospital
Platinum Member
Platinum Member
Posts: 2780
Joined: Sun Jul 11, 2010 6:46 pm
Location: Silverhill, AL
Contact:

Re: Help with part identification

Post by hornhospital » Mon Mar 01, 2021 9:47 pm

Here is the thread about replacing the wiring harness conduit ("chase"):

viewtopic.php?f=11&t=32210&p=229495&hilit=Door#p229495
Ken Kanne
'84 633CSi "Sylvia"; '85 635CSi "Katja";'85 325e "Hazel Ann";'87 325is "Odette"; '93 325is "Elvira"; '95 M3 "Ashlyn"; '95 318is "Bebe"

jonty72
Posts: 7
Joined: Sun Aug 19, 2018 6:24 am
Location: Australia

Re: Help with part identification

Post by jonty72 » Tue Mar 02, 2021 12:40 am

Thanks everyone - much appreciated re: the rubber wiring harness.

I think I have identified the correct part for the plastic window guide...it looks like it's 07 Covering inner left #51131843863 in the attached screenshot.
Capture.PNG
Capture.PNG (77.67 KiB) Viewed 2774 times
I ordered it at Maximillion yesterday as their website indicated it was still available however they have refunded the money as they have now indicate their website was incorrect and it's NLA. Anyway I'll keep searching ](*,)
1986 E24 635Csi Diamantschwarz Metallic RHD
2015 F32 428i Alpine Weiss

emac
Bigcoupe 100 Post club
Posts: 140
Joined: Thu Feb 06, 2020 2:57 am
Location: SC

Re: Help with part identification

Post by emac » Tue Mar 02, 2021 1:35 am

sucks when that happens. Some websites are better than others keeping up with NLA parts.

User avatar
635sharknose
Bigcoupe 100 Post club
Posts: 486
Joined: Fri Sep 13, 2019 4:58 pm
Location: The Netherlands
Contact:

Re: Help with part identification

Post by 635sharknose » Tue Mar 02, 2021 6:57 am

hornhospital wrote:
Mon Mar 01, 2021 9:47 pm
Here is the thread about replacing the wiring harness conduit ("chase"):

viewtopic.php?f=11&t=32210&p=229495&hilit=Door#p229495
Yes, that was the thread! :D
Paul
Image
Instagram: @635sharknose
1987 635CSi Bronzitbeige

Post Reply

Who is online

Users browsing this forum: No registered users and 7 guests