Have started pulling together my Brembo big brake project.
I have got all the parts together, but have been advised that this brake modification requires the installation of a brake master cylinder from an E32 750i.
The part number according to OEM is 34331161772.
If any one can help with this I would appreciate it.
Or if anyone who has done this conversion knows of another master cylinder I can use I would be most grateful.
Finally if I used the existing master cylinder from my '88 635....what would be the consequences ?
Wanted - Master Cylinder
Moderators: GRNSHRK, ron, bfons
-
- Posts: 247
- Joined: Mon Aug 01, 2011 2:18 pm
- Location: Hampshire UK
Re: Wanted - Master Cylinder
When you replace the M/C with the 750 one you will have to make up new brake lines as it is different to the original.
I might have a spare 750 M/C will let you know.
I might have a spare 750 M/C will let you know.
They are ALWAYS rustier than you thought!!!!!!
'85 M #228
'87 M #367
'88 High line.
'10 X5
‘84 Alfasud 1.5 ti
'85 M #228
'87 M #367
'88 High line.
'10 X5
‘84 Alfasud 1.5 ti
-
- Posts: 247
- Joined: Mon Aug 01, 2011 2:18 pm
- Location: Hampshire UK
Re: Wanted - Master Cylinder
Thanks Ron,
Hopefully hear back from you soon.....otherwise project on hold
Hopefully hear back from you soon.....otherwise project on hold
Re: Wanted - Master Cylinder
Looked through my spares and sorry to say that no 750 M/C.sideshowbob wrote: ↑Fri Feb 18, 2022 3:19 pm Thanks Ron,
Hopefully hear back from you soon.....otherwise project on hold
They are ALWAYS rustier than you thought!!!!!!
'85 M #228
'87 M #367
'88 High line.
'10 X5
‘84 Alfasud 1.5 ti
'85 M #228
'87 M #367
'88 High line.
'10 X5
‘84 Alfasud 1.5 ti
-
- Posts: 247
- Joined: Mon Aug 01, 2011 2:18 pm
- Location: Hampshire UK
Re: Wanted - Master Cylinder
OK thanks....