suspension parts
Moderators: GRNSHRK, ron, bfons
-
- Posts: 48
- Joined: Wed Jul 18, 2012 9:31 pm
- Location: Vancouver, WA
suspension parts
Bilstein B 6 fits 1980 euro 635, B 6 rears with original springs and front upper perches and used bearings.
$395.00 OBO --plus shipping USD
$395.00 OBO --plus shipping USD
- Attachments
-
- 2021-08-02 08.32.10 (3).jpg (1.66 MiB) Viewed 1864 times
Last edited by 80euro Csi on Sun Oct 17, 2021 3:04 pm, edited 4 times in total.
-
- Posts: 58
- Joined: Mon Jan 19, 2015 9:38 pm
- Location: Houston, TX
Re: suspension parts
Hi, I have sent an email to you. Thanks!
-
- Posts: 58
- Joined: Mon Jan 19, 2015 9:38 pm
- Location: Houston, TX
Re: suspension parts
Hello, what would be the shipping cost to Houston, TX, USA, ZIP code 77008 please?
-
- Posts: 48
- Joined: Wed Jul 18, 2012 9:31 pm
- Location: Vancouver, WA
Re: suspension parts
Hi again,
I'm really not in the business of selling parts so, give me a bit to weigh them and call UPS and I'll get back to you.
I'm really not in the business of selling parts so, give me a bit to weigh them and call UPS and I'll get back to you.
80euro Csi
-
- Posts: 48
- Joined: Wed Jul 18, 2012 9:31 pm
- Location: Vancouver, WA
Re: suspension parts
OK
UPS ground arrives Monday 27th
$104.87
That's fronts, rear with springs and upper perches with used bearings front.
FYI I really loved the ride but it was 1 and 1/4 " too high for what I wanted so I went with all new coil overs and that company wouldn't use my Bilsteins,they had agreement with others?
If you would email me I could send pics.
UPS ground arrives Monday 27th
$104.87
That's fronts, rear with springs and upper perches with used bearings front.
FYI I really loved the ride but it was 1 and 1/4 " too high for what I wanted so I went with all new coil overs and that company wouldn't use my Bilsteins,they had agreement with others?
If you would email me I could send pics.
80euro Csi
-
- Posts: 48
- Joined: Wed Jul 18, 2012 9:31 pm
- Location: Vancouver, WA
Re: suspension parts
Picture of what I put on car, my car with 19" wheels and plenty of easy change adjustments
- Attachments
-
- 2021-08-02 08.24.04.jpg (121.96 KiB) Viewed 1862 times
-
- 2021-07-20 15.35.13 (2).jpg (313.08 KiB) Viewed 1862 times
80euro Csi
- 635sharknose
- Posts: 513
- Joined: Fri Sep 13, 2019 4:58 pm
- Location: The Netherlands
- Contact:
Re: suspension parts
The 19's look big on the slim E24 chassis in comparison to a modern car. Nowadays 19's are relatively small. The bigcoupe of the past is just a small car in present.
Paul
Instagram: @635sharknose
1987 635CSi Bronzitbeige
Instagram: @635sharknose
1987 635CSi Bronzitbeige
- 86_6series
- Platinum Member
- Posts: 1073
- Joined: Mon Apr 02, 2007 10:08 pm
- Location: West Nyack, NY
Re: suspension parts
Can you post the link for the suspension company?
Thanks
Thanks
86-635CSi
96-MB C220 SOLD
98-740i
71-Continental MK3
96-MB C220 SOLD
98-740i
71-Continental MK3
-
- Posts: 48
- Joined: Wed Jul 18, 2012 9:31 pm
- Location: Vancouver, WA
Re: suspension parts
https://groundcontrolstore.com/collections/bmw
Just be patient if you do buy from them and you'll need to do a little modifying on the front wheel wells.
It took me several attempts to finalize my spring choices for street and hard driving and added 15mm spacers on front only. Rears have plenty of room.
Just be patient if you do buy from them and you'll need to do a little modifying on the front wheel wells.
It took me several attempts to finalize my spring choices for street and hard driving and added 15mm spacers on front only. Rears have plenty of room.
- Attachments
-
- 2021-08-02 08.27.00.jpg (55.65 KiB) Viewed 1836 times
80euro Csi
- Slownrusty
- Posts: 648
- Joined: Wed Apr 24, 2019 2:22 pm
- Location: Houston, TX
Re: suspension parts
Can you please elaborate on modifications are needed on the front to fit the Ground Control coilovers?
What is holding or supporting the threaded collar?
What is holding or supporting the threaded collar?
Yasin
"ole skool, I wouldn't have it any other way"
"ole skool, I wouldn't have it any other way"
-
- Posts: 48
- Joined: Wed Jul 18, 2012 9:31 pm
- Location: Vancouver, WA
Re: suspension parts
I just wrote an entire explanation and it's gone?
So, because I'm running 19" wheels and 8.5 wide tires a slight dent is needed for clearance.
Regarding the support, you cut the spring perch and leave the weld or not and they supple O-rings and threaded collar for spring base.
They have must of this information on their website.https://groundcontrolstore.com/collections/bmw
I have to go now but would be happy to help later.
Neal
So, because I'm running 19" wheels and 8.5 wide tires a slight dent is needed for clearance.
Regarding the support, you cut the spring perch and leave the weld or not and they supple O-rings and threaded collar for spring base.
They have must of this information on their website.https://groundcontrolstore.com/collections/bmw
I have to go now but would be happy to help later.
Neal
-
- Posts: 48
- Joined: Wed Jul 18, 2012 9:31 pm
- Location: Vancouver, WA