E32 750i Brake Master Cylinder

Post in this forum for topics relating to suspension, steering, and brakes

Moderators: GRNSHRK, ron, bfons

Post Reply
sideshowbob
Posts: 247
Joined: Mon Aug 01, 2011 2:18 pm
Location: Hampshire UK

E32 750i Brake Master Cylinder

Post by sideshowbob »

As part of my Brembo brake conversion I want to fit an E32 750i Brake master cylinder with a 25mm bore.

Question is will the standard 635CSi brake fluid reservoir fit onto this master cylinder.

If someone has done this conversion but used the 750i reservoir could they measure the distance between the reservoir mounting centres so I can check this against my 635 reservoir

Thanks
sideshowbob
Posts: 247
Joined: Mon Aug 01, 2011 2:18 pm
Location: Hampshire UK

Re: E32 750i Brake Master Cylinder

Post by sideshowbob »

That's great ...just as I thought , than you
TimU
Posts: 280
Joined: Tue Dec 14, 2021 2:16 am
Location: Sydney

Re: E32 750i Brake Master Cylinder

Post by TimU »

Is it a straight swap conversion for the e32 BMC into a RHD E24?
04/1986 635csi Euro spec
Australian Delivered, RHD
Post Reply