bigcoupe.com

Spax springs new, never mounted or used,. $275 shipped CONUS

Get ahold of Jay Stratton. His work is impeccable. He just did my PS pump and I am very pleased. By the way, the pump was a Rockauto rebuild and lasted about 60 miles

This is an "as good as it gets" garage tool. You did well. Sold mine years ago and have been kicking myself ever since

That's who. sfdon uses. Don is one of the top restorers of E9s in the country. He uses Pete's and if they weren't good he wouldn't be using them.

Not sure about West coast rebuilders. Go to the E9 forum, at..https://e9coupe.com/forum/, and look for sfdon. He is located in Alameda CA.If he can't do it he will tell you where to get it done

I did mine with after market glass and a new seal from BMW. Myself and a friend put it in ourselves. I am totally happy with it. I simply called a glass company that does auto glass and was able to get one through them

If push comes to shove, White Post Restorations can rebuild it. They rebore the cylinder and then line it with a stainless steel liner and replace all of the mechanicals with new parts

Hi Bert as per your original quote you managed at one point in time to reproduce these rubbers. Can you still do that if we manage to have a group buy?
[/quote]


I am not doing them anymore. Contact Syd on this forum.He is doing really nice ones

In my bushing searches over the years, I have determined poly bushings are too hard and if you aren't racing, they aren't the way to go. I am using a new original steering coupler from BMW and am more than pleases with it.There is not any vibration in the column and drives smooth. Aside from the fac...

My 81 euro with Motronic, 1.0, uses the same regulator. It is 2.5 bar and and Ljet systems use the same one. The post 81 cars use a 3 bar . Unless your regulator has been replaced, it shouldn't be adjustable. My 81 Euro was 99% original and the pressure regulator was "fixed". The other thi...

I am bringing back to life a 79 Euro635csi that had been sitting for ten years. Car has comfort seats, and the black velour is worn so badly that the seat covers need to be replaced. Seats themselves are in good shape. Can anyone recommend a source for seat covers that they have used? GAHH did my h...

My engine is the original M90 with custom pistons, I ordered mine from Diamond Racing pistons. The parent company, I found out, is JE pistons. The difference is JE wanted 2-3 months to fill the order, Diamond less than a month Prices very similar and the pistons are the same. You can order them for ...

lay a screw driver across the pump on the top. There will be enough places (tangs) where you can do this. Turn the screw driver with a pair of pliers and it should un screw. Had to this on my car so I know it will work

Yes and no.. The difference is either the trunk light or engine bay light, have 1/2 of the lens painted silver on the inside of the lens going horizontal. I took the one I bought, masked off 1/2 the lens and rattle canned it. It's a no brainer. Just look at your trunk light ,and you can figure out w...

realoem.com I think I saw it under the lighting section

Part # 3311362711. Still available new.

hornhospital wrote: ↑Sun Sep 18, 2022 11:35 pm The little box by the expansion tank is an auxiliary fused wiring connection. It's likely not connected to anything.

My 81 Euro had/has 1 which was used to power the aftermarket A/C

+++^^^

+++++++^^^

These have been rebuilt by Jeff Lablonde and never mounted.. All valved and sealed by his own designed parts.He does Ferrari and Lamborghini shocks for the respective marque. If you'd care to check him out, you can google his site at FJBshocksllc. What I am selling these for is a good bit less than ...

++++^^

I reproduce Euro stripes as original Black or white $150 shipped CONUS and $175 for metallic silver. I have been doing this for 10 years and nothing but praise for them

If wanted, I reproduce Euro stripes exactly as original.. If interested, send me your email address and I will send you picture of a car with them on

Years ago I bought my headliner from GAHH for under $200 and it fit perfect. Their material was close to the embossing on my original. Problem is to do it really right front and rear windshields have to come out as well as the rain gutters the body panels are all pinch welded in those areas The head...

^^^
Early pre 82 car