bigcoupe.com

what is your actual question?

FWIW I google searched "site:bigcoupe.com booster" and pulled up every thread that has had the word booster mentioned in it ever. Maybe some useful nuggets in there.

Interested.

There’s also a meetup happening in the north by this Saturday that I’ll be at - https://www.pre-stage.com/

Are your injectors known good?

looks like the clock connector. do you have a 13-button OBC, a 6-button OBC, or nothing?

that is what the diagram shows. You need C from the bottom of the lid - 26mm. Then, the numbers go 170mm from the right edge (A), and the letters go 18mm to the right of the numbers.

thanks! and thanks for the reminder to post updates :) medium-size update: I did a motor swap. before: https://i.imgur.com/OoYeoYn.jpeg after: https://i.imgur.com/Nb2chn9.jpeg To explain a little bit more - the B32 in the car was starting to smoke and leaked pretty badly. I got a mostly-disassembled...

there is a torsion on the trunk floor when the bar is sprung. I haven't heard of it happening to E24/E28s, but tearing out rear subframe mounts is not uncommon on E30s with a moderately uprated bar.

there's a spring in the filter housing?!?!?!?

I have taken apart a large quantity of M30s and have never seen one.

Nice save!! Sounds like getting it running wasn't too bad at all, and the chassis is save-able.

I have a euro '80 shell that I'm getting ready to recycle, let me know if you need anything out of it.

call La Jolla Independent to see if they have the rings available. They were able to source a 1st oversize set for me, which is even harder to find than a std set.

Very nice!

there's a set FS on my local FB marketplace.... for $600

https://www.facebook.com/marketplace/it ... 0430816591

If you're asking about the fins I have, the specs are: 205/55R16 on 16x7.5 front and 225/50R16 on 16x8.5 rear.

no major updates, but a film camera enthusiast randomly snapped a photo of the car out on the street recently and it got some exposure on the 'gram :)



https://www.instagram.com/p/CsWy3fwRgiY/

Mine is very similar to bob’s but says duro-glas on it. Roundel present. Sounds like sigla was a later supplier.

I’m the opposite of a parts hoarder, everyone else has some of my parts :p

have one on the same parts car that has the glass. will let you know if it's ratty or usable.

I have a parts car with clean original glass, but it's a bit away from me. Will update when I get a photo of the driver's door glass stamping.

They start out semi-gloss and get pitted by road debris and brake dust pretty quick.

I liked mesh wheels, too, until I had to clean them!

16 is a good size, and some nice wheels come up from time to time. Would recommend to find the Rare Wheel Awareness FB group and see if any 5x120 wheels there match your interests.

I'm enjoying my 16" Hayashi Fins

Bob was right. I had a fun weekend :mrgreen: Back went on. This required cutting into the pre-world-bumper foam a little for clearance. I don't mind, as I'm on the hunt for a world rear bumper anyway. https://i.imgur.com/dZwNssD.jpg Front went on too. No surprises here. https://i.imgur.com/No4U7at.j...

gotta love a speedy body shop.







hoping to have everything on this weekend!

some of it is available here - https://www.ecstuning.com/b-genuine-bmw ... 121386309/

Good idea, will check there. Minor updates - got the front valence cleaned up and primed in flexible primer. Everything is off at a body shop now getting finalized and painted. https://i.imgur.com/lkoo7bw.jpg https://i.imgur.com/3ga7Z2Z.jpg https://i.imgur.com/kHTo2FQ.jpg https://i.imgur.com/Fb52ebd...