Hi all .
Compiling a list of items for a 265/6 installation.
After checking the size of the flywheel to crankshaft bolts for the manual flywheel there seems to be confusion on RealOEM and W&N sites as to whether they are M12 x 1.5 x 22 or M12 x 1.5 x 28 .
Can anyone confirm the correct size for a solid flywheel to M30 crank .
Thanks , Don
Flywheel bolts .
Moderators: GRNSHRK, ron, bfons
Flywheel bolts .
1981 635 series 1
Re: Flywheel bolts .
For some reason the manual uses 28mm - 11227805885, auto 22 -11220616143. Change your car to an auto on realoem to see. WN don't appear to list the 28mm.
'85 635csi JPS (RA2-66)
Re: Flywheel bolts .
Thanks for the reply .
Yeah , I found those part nos. but as the drawing used was the same for auto and manual showing the same components I wanted to ensure that the 28mm was the correct one .
Herr Walloth replied to my question and sent the link to the 28mm version .
https://www.wallothnesch.com/en/screw-2 ... 11-12.html.
Ordered .
Don
Yeah , I found those part nos. but as the drawing used was the same for auto and manual showing the same components I wanted to ensure that the 28mm was the correct one .
Herr Walloth replied to my question and sent the link to the 28mm version .
https://www.wallothnesch.com/en/screw-2 ... 11-12.html.
Ordered .
Don
1981 635 series 1
- 86_6series
- Platinum Member
- Posts: 1069
- Joined: Mon Apr 02, 2007 10:08 pm
- Location: West Nyack, NY
Re: Flywheel bolts .
The A/T tranny flywheel is much thinner than the manual
therefore the use of shorter bolts.
therefore the use of shorter bolts.
86-635CSi
96-MB C220 SOLD
98-740i
71-Continental MK3
96-MB C220 SOLD
98-740i
71-Continental MK3