Fuel line size - 85 635 March build
Moderators: GRNSHRK, ron, bfons
Fuel line size - 85 635 March build
I plan to replace the fuel lines from the pump to the filter as well as those leading to the filler. It appears to be 8mm and 12mm from realOEM - I assume that is ID. Any tips or other hoses I should get. Do you use regular hose clamps?
85 635CSi Bronzit
- hornhospital
- Platinum Member
- Posts: 2940
- Joined: Sun Jul 11, 2010 6:46 pm
- Location: Silverhill, AL
- Contact:
Re: Fuel line size - 85 635 March build
Fuel injection pressure rated hose ONLY. 8mm I.D./12mm O.D. is correct. Regular (screw clamp) hose clamps are ok. The ones with the formed thread rather than slotted threads are better for the hose.
Ken Kanne
'84 633CSi "Sylvia"; '85 635CSi "Katja";'85 325e "Hazel Ann"; '95 M3 "Ashlyn"
'84 633CSi "Sylvia"; '85 635CSi "Katja";'85 325e "Hazel Ann"; '95 M3 "Ashlyn"
Re: Fuel line size - 85 635 March build
Thanks. I had mistakenly assumed there were 2 different sizes.
85 635CSi Bronzit
Re: Fuel line size - 85 635 March build
I used 5/16 because it was cheap and I am a sinner.
SHRKATK - Red 87' 635csi
- Ralph in Socal
- Platinum Member
- Posts: 2748
- Joined: Tue Apr 14, 2009 3:32 am
- Location: High Desert of SoCal
Re: Fuel line size - 85 635 March build
You’re not mistaken. 8 mm ID FI hose mostly except for the 12 mm ID line from the tank port to the inlet on the external fuel pump. About 2 feet long but varies a small amount based on model year. This line is not under FI pressure so just good quality fuel line is adequate. A bit difficult to replace the line as it snakes between the body and the fuel tank. Loosening the tank mount bolts and allowing the tank to lower a little bit helps a lot
Ralph
There is a very fine line between "Hobby" and Mental Illness.
85 635csi Zinno Auto
84 528i Euro
83 635 Euro Arktik
81 528i Kastanien 5-speed
88 528e Bronzit (Granpa Car)
86 535i Auto (For Sale)
81 633 csi (retired)
85 635csi Zinno Auto
84 528i Euro
83 635 Euro Arktik
81 528i Kastanien 5-speed
88 528e Bronzit (Granpa Car)
86 535i Auto (For Sale)
81 633 csi (retired)
Re: Fuel line size - 85 635 March build
Ralph,
Thanks. I plan to replace all the lines back there while I'm at it.
It's maintenance month - new belts, oil, filter, a few cracked lines, CV Boots or possibly entire axle assemblies, pittman arms (dogbones), sway bar linkage. Good news trans fluid is fine. May do radiator hoses while at it and flush..
Thanks. I plan to replace all the lines back there while I'm at it.
It's maintenance month - new belts, oil, filter, a few cracked lines, CV Boots or possibly entire axle assemblies, pittman arms (dogbones), sway bar linkage. Good news trans fluid is fine. May do radiator hoses while at it and flush..
85 635CSi Bronzit
Re: Fuel line size - 85 635 March build
Ralph, Any idea how much of the High Pressure 8mm line I need?
Thanks,
Jim
Thanks,
Jim
85 635CSi Bronzit
- Ralph in Socal
- Platinum Member
- Posts: 2748
- Joined: Tue Apr 14, 2009 3:32 am
- Location: High Desert of SoCal
Re: Fuel line size - 85 635 March build
8 mm ID under the hood is about 3 feet. Don’t forget “the little perisher” (ode to Brucey) hose that feeds the Cold Start Valve.
Another 2 feet or so by the fuel pump and filter assembly. The return lines (about the same lengths) are not under FI pressure so good quality fuel lines are fine.
Ralph
Another 2 feet or so by the fuel pump and filter assembly. The return lines (about the same lengths) are not under FI pressure so good quality fuel lines are fine.
Ralph
There is a very fine line between "Hobby" and Mental Illness.
85 635csi Zinno Auto
84 528i Euro
83 635 Euro Arktik
81 528i Kastanien 5-speed
88 528e Bronzit (Granpa Car)
86 535i Auto (For Sale)
81 633 csi (retired)
85 635csi Zinno Auto
84 528i Euro
83 635 Euro Arktik
81 528i Kastanien 5-speed
88 528e Bronzit (Granpa Car)
86 535i Auto (For Sale)
81 633 csi (retired)
Re: Fuel line size - 85 635 March build
Thanks. Under hood looks good but will double check.
85 635CSi Bronzit