Wing cell AC compressor bracket assembl

Post in this forum for cars and/or parts wanted.

Moderators: GRNSHRK, ron, bfons

Post Reply
User avatar
RossDinan6
Posts: 295
Joined: Mon Jan 29, 2007 2:35 am
Location: SW FL, USA

Wing cell AC compressor bracket assembl

Post by RossDinan6 »

i am looking for a wing cell ac compressor bracket assembly. Items 1,2,3,7,8,9 in this page: https://www.realoem.com/bmw/enUS/showpa ... Id=64_0430 Working toward the AC blowing cold this summer.
Ross
'84 633 Dinan turbo
ajmcmaken
Posts: 5
Joined: Mon Apr 04, 2022 3:36 am
Location: TX

Re: Wing cell AC compressor bracket assembl

Post by ajmcmaken »

Can't help with all of these items, but the chain tensioner (#2 - 64521289076) is discontinued and NLA. That said, the E30 / E34 tensioner (64551714458) is still available and is a perfect fit replacement. Costs under $20 last I checked.
User avatar
RossDinan6
Posts: 295
Joined: Mon Jan 29, 2007 2:35 am
Location: SW FL, USA

Re: Wing cell AC compressor bracket assembl

Post by RossDinan6 »

I'll look into that. It sure seems like different part numbers would have different dimensions, but what would I know. I appreciate the info.
Ross
'84 633 Dinan turbo
User avatar
RossDinan6
Posts: 295
Joined: Mon Jan 29, 2007 2:35 am
Location: SW FL, USA

Re: Wing cell AC compressor bracket assembl

Post by RossDinan6 »

Well, I thought I had everything lined up and would be soon heading for final assembly. Not so fast. The tensioner/support bracket (64 55 17 14 458) is back ordered with no availability date. I have a line on pars car(s) an hour or so from here. I'll give him a call in the morning.

Oh yeah, the 'complete AC O-ring kit is not, no expansion valve orifice seal.
Ross
'84 633 Dinan turbo
User avatar
RossDinan6
Posts: 295
Joined: Mon Jan 29, 2007 2:35 am
Location: SW FL, USA

Re: Wing cell AC compressor bracket assembl

Post by RossDinan6 »

Another setback. I had a line on a complete compressor bracket assembly as well as various trim bits I've needed from a fella up in Sebring with a couple parts cars. We had discussed me driving up to see him this morning after our conversation a week or so ago. He hasn't responded to calls or texts to set it up for a few days now. Hopefully I'll still hear from him.

I am still looking for a wing cell compressor bracket assembly.

Since then I have emailed a couple BMW salvage yards found on the webz. I'll see what they come up with.

Once I can hang the compressor I will be able to route and make the hoses. All I can do right now is little detail work. It has gotten silly hot here, I'd like to finish this up and enjoy cool blow.
Ross
'84 633 Dinan turbo
User avatar
Ralph in Socal
Platinum Member
Platinum Member
Posts: 2746
Joined: Tue Apr 14, 2009 3:32 am
Location: High Desert of SoCal

Re: Wing cell AC compressor bracket assembl

Post by Ralph in Socal »

I've asked Jay Stratton to contact you. We have collaborated to get your parts together

Ralph
There is a very fine line between "Hobby" and Mental Illness.

85 635csi Zinno Auto
84 528i Euro
83 635 Euro Arktik
81 528i Kastanien 5-speed
88 528e Bronzit (Granpa Car)
86 535i Auto (For Sale)
81 633 csi (retired)
TimU
Posts: 280
Joined: Tue Dec 14, 2021 2:16 am
Location: Sydney

Re: Wing cell AC compressor bracket assembl

Post by TimU »

Is this what you're after?
Lower chain tensioner assembly from 1986 635CSi.
I've kept the upper engine-block support bracket on my car.

Make me an offer if you like. Located in Sydney, Australia if you're willing to pay for postage.

The teeth are a little chewed up, but the bracket-side could be cleaned up with a little bit of effort, and the bolt could be used when rotated to the good side.
IMG_20220516_223944.jpg
IMG_20220516_223944.jpg (1.1 MiB) Viewed 1151 times
IMG_20220516_224151 (Large).jpg
IMG_20220516_224151 (Large).jpg (477.8 KiB) Viewed 1151 times
IMG_20220516_224132 (Large).jpg
IMG_20220516_224132 (Large).jpg (266.49 KiB) Viewed 1151 times
IMG_20220516_224026 (Large).jpg
IMG_20220516_224026 (Large).jpg (344.67 KiB) Viewed 1151 times
04/1986 635csi Euro spec
Australian Delivered, RHD
User avatar
RossDinan6
Posts: 295
Joined: Mon Jan 29, 2007 2:35 am
Location: SW FL, USA

Re: Wing cell AC compressor bracket assembl

Post by RossDinan6 »

Well. that's part of it. I would also need the part you have bolted to your block. I appreciate the offer and I'll keep it in mind if a complete assembly is unavailable.

Hopefully between Ralph and Jay I can get what I am looking for. What I need is all the parts on this page:https://www.realoem.com/bmw/enUS/showpa ... Id=64_0430, besides the belt of course. My digging has this bracket assembly from 4/84 on E24 as well as a bunch of E28s and E34s. Probably others I haven't dug up yet. I'll be trying the guy in Sebring again, hopefully he's OK.
Ross
'84 633 Dinan turbo
TimU
Posts: 280
Joined: Tue Dec 14, 2021 2:16 am
Location: Sydney

Re: Wing cell AC compressor bracket assembl

Post by TimU »

The supporting bracket is available as a new part if needed:
https://www.schmiedmann.com/en/product/ ... -1-284-953

Part 64521284953 was found on the following vehicles:

5' E28
5' E34
6' E24
7' E23
7' E32

Click on the RealOEM part number to see specifics.
04/1986 635csi Euro spec
Australian Delivered, RHD
User avatar
RossDinan6
Posts: 295
Joined: Mon Jan 29, 2007 2:35 am
Location: SW FL, USA

Re: Wing cell AC compressor bracket assembl

Post by RossDinan6 »

Yes, I was aware of that. Two parts as I recall are not, thus the search for the works.
Ross
'84 633 Dinan turbo
User avatar
hornhospital
Platinum Member
Platinum Member
Posts: 2931
Joined: Sun Jul 11, 2010 6:46 pm
Location: Silverhill, AL
Contact:

Re: Wing cell AC compressor bracket assembl

Post by hornhospital »

ECS says available in 9 business days.
Screenshot_20220603-190232_Chrome.jpg
Screenshot_20220603-190232_Chrome.jpg (338.64 KiB) Viewed 1095 times
Ken Kanne
'84 633CSi "Sylvia"; '85 635CSi "Katja";'85 325e "Hazel Ann"; '95 M3 "Ashlyn"
User avatar
86_6series
Platinum Member
Platinum Member
Posts: 1069
Joined: Mon Apr 02, 2007 10:08 pm
Location: West Nyack, NY

Re: Wing cell AC compressor bracket assembl

Post by 86_6series »

Get in touch with

Elias Gergy
Lives in San Diego, California

He sells BMW 6 series parts. I've bought hard to find from him and was never disappointed.
You can only reach him through FaceBook.

Bob V
86-635CSi
96-MB C220 SOLD
98-740i
71-Continental MK3
Post Reply