Bilstein rear shocks

Post in this forum for topics relating to suspension, steering, and brakes

Moderators: GRNSHRK, ron, bfons

Post Reply
wattsmonkey
Platinum Member
Platinum Member
Posts: 1580
Joined: Mon Jul 16, 2007 2:58 pm
Location: Cheltenham, U.K.

Bilstein rear shocks

Post by wattsmonkey »

Having researched this ages and ages ago when I put H&R's on the rear of the burgundy 635, I'm now putting Bilsteins on the rear of the black project car with the benefit of a bit more info in the hope that it might be of use to anyone else in the same position.

The different designations used by Bilstein don't help things!

Anyway, I've got Eibach springs on the black car, using the shorter bumpstops from the M635 on the rear, of course, and Bilstein B6 shocks. The ride and handling are absolutely brilliant with them, but there is a problem with the shorter springs insofar as they are prone to falling out of the perch when the car is jacked up.

The solution to this is - as documented elsewhere - Bilstein B8 shocks, which are 10mm shorter in length.

Since I last looked into this, there are now TWO B8 rear shocks to fit the E24:

The softer and cheaper 24-006071 (compression and rebound 160/80) recommended for smaller-engined cars like the E28 528i
The harder and pricier 24-007276 (compression and rebound 270/100) for the 535i.

The latter was fitted to my old burgundy 635, with M635 shocks up front and it was great, so I'll be looking at getting the same again.

At the time of writing, the best price is £140 each, but they are on backorder from Bilstein, with an expected delivery date of end of July.

I don't have the figures/numbers to compare to standard E28 M535i or M635CSi shocks, with the numbers on the shock bodies proving beyond my intellectual capacity to decipher!
Last edited by wattsmonkey on Fri Jun 03, 2022 8:17 am, edited 1 time in total.
"Most of it necessary; all of it enjoyable." LJKS
'84 635CSi, dogleg...itbs and supercharger????? Eaton Mess
TimU
Posts: 134
Joined: Tue Dec 14, 2021 2:16 am
Location: Sydney

Re: Bilstein rear shocks

Post by TimU »

Great minds think alike :)
I know you found it already, but I'm just going to shamelessly cross-link my post for anyone who comes across this in the future.

Bilstein and H&R Parts - Correct Part Numbers
viewtopic.php?p=234821#p234821
04/1986 635csi Euro spec
Australian Delivered, RHD
wattsmonkey
Platinum Member
Platinum Member
Posts: 1580
Joined: Mon Jul 16, 2007 2:58 pm
Location: Cheltenham, U.K.

Re: Bilstein rear shocks

Post by wattsmonkey »

Not sure what, exactly, is what with Bilstein B8s, but my 0727s have not arrived and I am told that they are no longer being manufactured - there is some stock remaining, somewhere (but not anywhere near me, apparently).

I've ordered the softer 24-006071 instead. This will be interesting - I've got E28 M5 sachs-spec arbs on my car, 25mm front and 18mm rear, so I'll see if I notice the difference. It means I'll have "harder" shocks up front than the rear, but needs must.
"Most of it necessary; all of it enjoyable." LJKS
'84 635CSi, dogleg...itbs and supercharger????? Eaton Mess
Post Reply