Tried new treatment for the black bits

Post in this forum for topics relating to the exterior. This includes body, windows, and accessories

Moderators: GRNSHRK, ron, bfons

Post Reply
GRNSHRK
Platinum Member
Platinum Member
Posts: 3710
Joined: Thu Apr 08, 2004 3:24 pm
Location: Gilroy (SF Bay Area) CA

Tried new treatment for the black bits

Post by GRNSHRK »

This stuff came as a suggestion from one of the attendees that came from Oregon last year to PSF, so I thought I'd pick some up and give it a try :-k

It's called Solution Finish, and while it takes a bit to apply and wipe off, etc., I do like the results =D>

Looks like it's time to deal with those pesky stone chips as well ](*,)
Attachments
Solution Finish 2.jpg
Solution Finish 2.jpg (771.81 KiB) Viewed 2220 times
Solution Finish 1.jpg
Solution Finish 1.jpg (815.96 KiB) Viewed 2220 times
:mrgreen:
Bobbo
1980 633 CSi Cypress Green/Pearl Beige
2017 X5 M Sport Xdrive 35i Carbon Black/Ivory White
2005 330 Ci ZHP Cabrio Imola Red/Bone/Black
Image
User avatar
hornhospital
Platinum Member
Platinum Member
Posts: 2931
Joined: Sun Jul 11, 2010 6:46 pm
Location: Silverhill, AL
Contact:

Re: Tried new treatment for the black bits

Post by hornhospital »

I wish the previous owner(s) of my E30 had used something like that instead of semi-gloss black paint. :(
Ken Kanne
'84 633CSi "Sylvia"; '85 635CSi "Katja";'85 325e "Hazel Ann"; '95 M3 "Ashlyn"
GRNSHRK
Platinum Member
Platinum Member
Posts: 3710
Joined: Thu Apr 08, 2004 3:24 pm
Location: Gilroy (SF Bay Area) CA

Re: Tried new treatment for the black bits

Post by GRNSHRK »

Paint?!? #-o

Wow, that just ain't right [-X

Sorry to hear, but live and learn, always more room in thee ole cranium for knowledge =D>

I'm optimistic about this juice, but we'll see after sitting in the sun all day tomorrow, in a local car show [-o<
:mrgreen:
Bobbo
1980 633 CSi Cypress Green/Pearl Beige
2017 X5 M Sport Xdrive 35i Carbon Black/Ivory White
2005 330 Ci ZHP Cabrio Imola Red/Bone/Black
Image
User avatar
Ralph in Socal
Platinum Member
Platinum Member
Posts: 2746
Joined: Tue Apr 14, 2009 3:32 am
Location: High Desert of SoCal

Re: Tried new treatment for the black bits

Post by Ralph in Socal »

Looks good Bobbo. Is it an oil?

BTW - typical "easy restoration" to spray paint those headlight grills. I prefer greying and old to spray paint

Ralph
There is a very fine line between "Hobby" and Mental Illness.

85 635csi Zinno Auto
84 528i Euro
83 635 Euro Arktik
81 528i Kastanien 5-speed
88 528e Bronzit (Granpa Car)
86 535i Auto (For Sale)
81 633 csi (retired)
GRNSHRK
Platinum Member
Platinum Member
Posts: 3710
Joined: Thu Apr 08, 2004 3:24 pm
Location: Gilroy (SF Bay Area) CA

Re: Tried new treatment for the black bits

Post by GRNSHRK »

Hey Ralph, sorry for the late reply :-$

It doesn't appear to have an oil like feel to it, but it is a black colored liquid that soaks in and/or dries within a minute or 2 :-k

You do have to wipe off the excess with a clean cloth and of course, remove anything that got onto the painted surfaces or brightwork [-X

Overall, I'm pleased so far =D>

I was using tire gel previously, and while it's very shiny, it also remains sticky to the touch :-"
:mrgreen:
Bobbo
1980 633 CSi Cypress Green/Pearl Beige
2017 X5 M Sport Xdrive 35i Carbon Black/Ivory White
2005 330 Ci ZHP Cabrio Imola Red/Bone/Black
Image
L.Tigre
Posts: 50
Joined: Fri Jul 22, 2022 3:53 pm
Location: Greenville SC

Re: Tried new treatment for the black bits

Post by L.Tigre »

Looks good. I need some!

Did you use it on just the grille?.. or also on the rubber bumper trim?
GRNSHRK
Platinum Member
Platinum Member
Posts: 3710
Joined: Thu Apr 08, 2004 3:24 pm
Location: Gilroy (SF Bay Area) CA

Re: Tried new treatment for the black bits

Post by GRNSHRK »

Yes, I also used it on the rubber bumper trim, plastic piece on the top of the bumper, side pieces, waist molding, etc. \:D/

You know how it goes, once you get started :roll:
:mrgreen:
Bobbo
1980 633 CSi Cypress Green/Pearl Beige
2017 X5 M Sport Xdrive 35i Carbon Black/Ivory White
2005 330 Ci ZHP Cabrio Imola Red/Bone/Black
Image
L.Tigre
Posts: 50
Joined: Fri Jul 22, 2022 3:53 pm
Location: Greenville SC

Re: Tried new treatment for the black bits

Post by L.Tigre »

Ok; I am following your lead. A lot of hazy surfaces to be addressed!

While we’re at it: do you polish chrome trim also? If so with what product? I took a look at some posts on how to remove it…. Those scared me, I think I’d end up with a crumpled mess if I tried to remove it. But that means fixing the hazy chrome in situ as it were. Can it be done?

I’ll remove the Al bumpers and do those separate…. That is understood and I accept the challenge. But what about chrome trim?
GRNSHRK
Platinum Member
Platinum Member
Posts: 3710
Joined: Thu Apr 08, 2004 3:24 pm
Location: Gilroy (SF Bay Area) CA

Re: Tried new treatment for the black bits

Post by GRNSHRK »

Thanks for following =D>

But there isn't any "chrome" trim, at least not on a US version :-k

The trim around the grills is hard anodized aluminum, the center grills are also aluminum as well :-"

And as you duly noted, the bumpers are also aluminum and hard anodized, refinishing requires removing the anodized coating first :-({|=

I do want to take my grills out and attempt to polish them, getting tips along the way, how to remove the anodizing first [-o<

Winter project \:D/
:mrgreen:
Bobbo
1980 633 CSi Cypress Green/Pearl Beige
2017 X5 M Sport Xdrive 35i Carbon Black/Ivory White
2005 330 Ci ZHP Cabrio Imola Red/Bone/Black
Image
L.Tigre
Posts: 50
Joined: Fri Jul 22, 2022 3:53 pm
Location: Greenville SC

Re: Tried new treatment for the black bits

Post by L.Tigre »

Ugh. I get it.

I read online how to remove anodize coating with draino or oven cleaner. But I am trying to refurbish it in place, without removing it.

Maybe hazy window trim is not a problem worth solving, for now…
Jackie&Gracie
Posts: 6
Joined: Fri Nov 11, 2022 7:51 pm
Location: York, PA

Re: Tried new treatment for the black bits

Post by Jackie&Gracie »

L.Tigre - I would be REAL CAREFUL about oven cleaner or draino on aluminum. I believe both of those are highly corrosive to something as soft as aluminum. I have used oven cleaner on tablesaw blades to remove sap/pine tar build up and it takes the paint right off the steel.

I am not suggesting it won’t work, but it might work very fast. Perhaps some testing on aluminum soda cans first would be a good idea. Perhaps a heavily diluted solution might be the answer.
Pod
Platinum Member
Platinum Member
Posts: 4492
Joined: Tue Mar 16, 2010 8:32 pm
Location: usually in the barn, Kent, England.

Re: Tried new treatment for the black bits

Post by Pod »

Very good advice 😉
L.Tigre
Posts: 50
Joined: Fri Jul 22, 2022 3:53 pm
Location: Greenville SC

Re: Tried new treatment for the black bits

Post by L.Tigre »

Jackie&Gracie wrote: Wed Nov 16, 2022 5:53 pm L.Tigre - I would be REAL CAREFUL about oven cleaner or draino on aluminum. I believe both of those are highly corrosive to something as soft as aluminum. I have used oven cleaner on tablesaw blades to remove sap/pine tar build up and it takes the paint right off the steel.

I am not suggesting it won’t work, but it might work very fast. Perhaps some testing on aluminum soda cans first would be a good idea. Perhaps a heavily diluted solution might be the answer.
Well…. I never did get around to the draino. But the oven cleaner was used successfully on the kidney grilles and some front grill trim. I left it in for about 30 minutes and that seemed to do the trick.

But…. That’s after taking the trim off first before spraying. I am not brave enough (foolish enough?) to apply it to trim while actually mounted on the car. And don’t plan to….

My takeaway is that the metal appears unharmed. Now also un-protected w no clear coat. But I can live with that-
Attachments
8C0088C9-C119-432C-99A8-02196C4CFCDB.jpeg
8C0088C9-C119-432C-99A8-02196C4CFCDB.jpeg (4.41 MiB) Viewed 1573 times
Post Reply