Looking For Bolt-On Distributor Rotor Adaptor

Post in this forum for cars and/or parts wanted.

Moderators: GRNSHRK, ron, bfons

Post Reply
Jcash
Posts: 14
Joined: Mon Aug 01, 2022 12:31 am
Location: [email protected]

Looking For Bolt-On Distributor Rotor Adaptor

Post by Jcash »

I’am Looking For a Bolt-On Distributor Rotor “Adaptor” To Convert My Push-On Rotor To The Upgraded Bolt-On Rotor For My 1983 633 CSI BMW. BMW Had a Service Campaign Back In The 80’s For Dealers To Perform This Upgrade To The Distributors On These Engines. In The Later Cars This Upgrade Was Done At The Factory. What I’am Looking For Is The Rotor “Adaptor” Not The Bolt-On Rotor Itself.
If You Have One Of These Or Know Someone Who Does Please Respond To This Post Or Private Message Me.
Here Is a Picture Of The Adaptor’s. The Adaptor On The Left Is The Stock Adaptor For The Push-On Rotor. The Adaptor On The Right Is The Upgraded Bolt-On Rotor Adaptor That I’am Looking For And Must Look Exactly Like What Is Pictured.
Any Help In Finding This Adaptor Would Be Greatly Appreciated! Jim C.
https://bigcoupe.com/phphttps://bigcoup ... w&id=34751
Attachments
E653D777-CE71-4740-AC3B-64362E305915.jpeg
E653D777-CE71-4740-AC3B-64362E305915.jpeg (2.91 MiB) Viewed 734 times
187E3ED9-ABFD-4047-8B36-8464163ADA61.jpeg
187E3ED9-ABFD-4047-8B36-8464163ADA61.jpeg (3.1 MiB) Viewed 734 times
bpoliakoff
Platinum Member
Platinum Member
Posts: 3312
Joined: Thu Sep 28, 2006 9:28 pm
Location: scottsdale, arizona
Contact:

Re: Looking For Bolt-On Distributor Rotor Adaptor

Post by bpoliakoff »

Realoem shows it as still available
81 Euro 635 M90 with motronic. Currently under a complete nut and bolt restoration. Pictures at
flickr.com/photos/bertsphotos.
Jcash
Posts: 14
Joined: Mon Aug 01, 2022 12:31 am
Location: [email protected]

Re: Looking For Bolt-On Distributor Rotor Adaptor

Post by Jcash »

The rotor adaptor on reatoem.com is not the correct adaptor,I looked into it.
But thanks for the reply.
JC
Post Reply