51231843789
88m6
Rodent took up temporary residence up in firewall and chewed mine up along with center hood pad.
Replaced my replacement hood pad already
Splash wall rubber wtb
Moderators: GRNSHRK, ron, bfons
Re: Splash wall rubber wtb
have one on the same parts car that has the glass. will let you know if it's ratty or usable.
Re: Splash wall rubber wtb
No rush, let me know.
Car will be in shop for 3 weeks
Car will be in shop for 3 weeks
Re: Splash wall rubber wtb
Depending on where the little buggers chewed, you can replace the forward section of the gasket with a common "top bulb" edge trim from your local hardware store.
e.g.
13 x 8 x 10mm Toolbox Seal With Top Bulb Rubber
https://www.bunnings.com.au/goliath-13- ... r_p4230049
You'll need to cut the factory gasket at the point where the two types are welded together and install the new top-bulb in-place of the old one which has often rusted.
If the mice have chewed the rearward part of the gasket (closest to the windscreen), then this product won't be a direct replacement.
I don't know where to source that style from sorry.
e.g.
13 x 8 x 10mm Toolbox Seal With Top Bulb Rubber
https://www.bunnings.com.au/goliath-13- ... r_p4230049
You'll need to cut the factory gasket at the point where the two types are welded together and install the new top-bulb in-place of the old one which has often rusted.
If the mice have chewed the rearward part of the gasket (closest to the windscreen), then this product won't be a direct replacement.
I don't know where to source that style from sorry.
04/1986 635csi Euro spec
Australian Delivered, RHD
Australian Delivered, RHD