help placing the 635CSI badge
Moderators: GRNSHRK, ron, bfons
-
bpoliakoff
- Platinum Member
- Posts: 3355
- Joined: Thu Sep 28, 2006 9:28 pm
- Location: scottsdale, arizona
- Contact:
help placing the 635CSI badge
Can someone measure from the bottom edge and right edge of the deck lid so I can position my badge"logo" correctly
81 Euro 635 M90 with motronic. Currently under a complete nut and bolt restoration. Pictures at
flickr.com/photos/bertsphotos.
flickr.com/photos/bertsphotos.
-
GRNSHRK
- Platinum Member
- Posts: 3798
- Joined: Thu Apr 08, 2004 3:24 pm
- Location: Gilroy (SF Bay Area) CA
Re: help placing the 635CSI badge
Here ya go, Bert, right from the horses mouth 
- Attachments
-
- 6er emblem spacing.gif (159.67 KiB) Viewed 1526 times
Bobbo
1980 633 CSi Cypress Green/Pearl Beige
2017 X5 M Sport Xdrive 35i Carbon Black/Ivory White
2005 330 Ci ZHP Cabrio Imola Red/Bone/Black
-
bpoliakoff
- Platinum Member
- Posts: 3355
- Joined: Thu Sep 28, 2006 9:28 pm
- Location: scottsdale, arizona
- Contact:
Re: help placing the 635CSI badge
Bobbo I may be wrong, but to me it just shows the spacing of the lettering I need to know the spacing for mounting Just measure the right edge of the decklid to where the characters end and from the bottom edge to the bottom of the logo
81 Euro 635 M90 with motronic. Currently under a complete nut and bolt restoration. Pictures at
flickr.com/photos/bertsphotos.
flickr.com/photos/bertsphotos.
Re: help placing the 635CSI badge
that is what the diagram shows. You need C from the bottom of the lid - 26mm. Then, the numbers go 170mm from the right edge (A), and the letters go 18mm to the right of the numbers.